legrand MRFAXR300PG Swifts MRF Medium Duty Return Flange Cable Tray Instructions
- June 12, 2024
- Legrand
Table of Contents
Swifts® MRF medium duty return flange cable tray
fittings
90° flat bend
MRFB 225 PG
Adjustable bend
MRFAB 225 PG
Inside riser
MRFIR 225 PG
Adjustable riser
MRFAR 225 PG
Selection charts p. 12-13
Dimensions and technical information : lengths p. 46 ; fixing options p.
50 ; fittings p. 51-63
Design notes p. 118
Loading graphs p. 46
| Pack | Cat. Nos. | Fittings (continued) |
|---|---|---|
| 1 | MRFBWF | All fittings have integral fishplates |
No couplers required
90° bends
For technical information,
p. 52-53|
1| MRFBWAF| 60°, 45° and 30° bends
For 50-300 mm wide, adjustable bends can also be used
For technical information,
p. 52-53|
1| MRFABWF| Adjustable bends
50-300 mm wide only
For technical information, p. 54-55|
1| MRFIRWF| 90° inside riser
For technical information,
p. 56|
1| MRFIRWAF | 60°, 45°, 30° inside riser
For technical information,
p. 56
1| MRFORWF| 90° outside riser
For technical information,
p. 56|
1| MRFORWAF| 60°, 45°, 30° outside riser
For technical information,
p. 56
1| MRFARWF| Adjustable risers (inside or outside)
For technical information,
p. 57|
1| MRFAXRWF| Extra long adjustable risers (inside or outside)
For technical information,
p. 58|
1| MRFTWF| Equal tees
For technical information,
p. 59|
1| MRFUTWBF| Unequal tees
For technical information,
p. 60-61|
1| MRFXWF| 4 way crosspieces
For technical information,
p. 62|
1| MRFRWKF| Straight reducers
For technical information,
p. 63|
Additional gauges and finishes available to special order
Contact us on +44 (0) 345 605 4333
Key : selecting MRF medium duty fittings. Replace the letters shown in red
with your choice from the following options :
W = Widths (mm) : 50, 75, 100, 150, 225, 300, 450, 600, 750, 900
A = Angle (°) : 60, 45 and 30 (90 does not need to be included in order code)
B = Branch width (mm) : 50, 75, 100, 150, 225, 300, 450, 600, 750
F = Finish : G (hot dip galvanised after manufacture),
D (deep galvanised), PG (pre-galvanised steel),
S (stainless steel), E (powder coated black RAL 9005)
K = Narrowed width when using a reducer (mm) :
50, 75, 100, 150, 225, 300, 450, 600, 750
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>