FlinQ FQC8338 Wireless Air Compressor Premium Instruction Manual

FlinQ FQC8338 Wireless Air Compressor Premium

Specifications

• Dimension : 160 x 63 x 62 mm
• Weight : 566g
• Pressure : 2 – 160 PSI / 0.1 – 11 BAR
• Working temperature : -10 ~ +45 degrees celsius
• Battery power : 27.75Wh / 11.1V
• Input parameters : 5 ~ 9V / 1 ~ 2A
• USB output: 5 ~ 9V / 1 ~ 2A

Product Usage Instructions

Turn on the Device
Fully charge the device before use. Press and hold the power button for 3 seconds to turn on the device.

Battery Indicator
Different colors of indicators on the LED display show different battery levels:

• Green: 70 – 100%
• Orange: 30 – 70%
• Red: 5 – 30%
• Red flash: 5% or less (When the icon is red, it needs to be charged before use)

Connect the Hose
Push the hose into the compressor and twist it to the right until you hear a click.

Connect Valve to Hose

• Schrader: The bicycles, electric bicycles, motorcycles, and automobiles will be equipped with Schrader valves. Connect the Schrader valve to the connector on the high-pressure hose.
• Presta: Road bikes and certain other bicycles require the use of a Presta adapter for inflation. Connect the Presta adapter to the connector on the high-pressure hose.
• Ball Needle: Balls, such as basketballs and footballs, require a ball needle for inflation. After firmly attaching the ball needle and the Schrader connector, insert the needle into the filling hole of the ball to inflate.

Welcome to the FlinQ family
Thanks for purchasing one of our items! To ensure continuous operation and accuracy, please read these operating instructions carefully before use and save this manual for future use. Passing certain procedures may result in incorrect reading and incorrect use of this product. We hope that you will enjoy using your new FlinQ product! If by any chance the item is damaged, defective or broken, you are covered with warranty! Please do not hesitate to contact us for any questions, concerns or suggestions at the email address as mentioned in this manual.
Register your FlinQ product
We can imagine you want to treat your FlinQ item carefully. Register your product and you will be entitled to the following:

• 1 year extra warranty (2+1)
• Personal support
• Digital warranty certificate
• Digital manual

Scan the QR code or go to flinqproducts.nl/registration

FlinQ Wireless Air Compressor Premium

• Please read this manual thoroughly before using the product! Keep it at a safe place for future reference. This product can be used outdoors (see below for more info).
• This appliance may be used (but not installed) by children aged 12 and over, and by persons with reduced physical, sensory, or mental capacities or a lack of sufficient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers.
• Cleaning and maintenance must not be carried out by children without supervision. Children must not be allowed to play with the appliance.
• Keep the packaging material away from children. There is a risk of suffocation!
• Do not allow unsupervised children to clean or maintain this device.

Warning

• Do not leave when the compressor is working.
• The pump may generate high temperatures or emit abnormal sounds during operation. Please turn it off to allow it to cool down. Do not use it again until it has cooled down.
• Keep away from combustibles and explosives.
• Avoid exposure to moisture, sand, and impacts.
• Do not store the product in excessively cold or hot environments. Since the inflator is equipped with a lithium battery, do not expose it to fire or discard it casually.

Using the compressor 1/2

1. Turn on the device
   Fully charge the device before use. Press and hold the power button for 3 seconds to turn on the device.

2. Battery indicator
   Different colors of indicators on the LED display show diff erent battery levels:

3. Green : 70 – 100%

4. Orange : 30 – 70%

5. Red : 5 – 30%

6. Red flash : 5% or less (When the icon is red it needs to be charged before use)

7. Connect the hose
   Push the hose into the compressor and twist it to the right until you hear a click.

8. Connect valve to hose

9. Schrader
   The bicycles, electric bicycles, motorcycles, and automobiles will be equipped with Schrader valves. Connect the Schrader valve to the connector on the high- pressure hose

10. Presta
    Road bikes and certain other bicycles require the use of a Presta adapter for installation. Connect the Presta adapter to the connector on the high-pressure hose.

11. Ball needle
    Balls, such as basketballs and footballs, require a ball needle for inflation. After firmly attaching the ball needle and the Schrader connector, insert the needle into the filling hole of the ball to inflate.

12. Check air pressure
    When the pump is powered on, the gas pipe is connected to the charging port. After detecting the pressure of the object being inflated, the top half display shows the pressure of the object, and the other half shows the preset pressure.

13. Select mode
    Press the working mode button briefly to select from 5 inflating scene modes:Mode| Suggested value| Adjustable range
    ---|---|---
    Car mode| 2.4 BAR| 0.1 – 4.4 BAR
    Motorcycle mode| 2.7 BAR| 0.1 – 3.7 BAR
    Bike mode| 38 PSI| 2 – 150 PSI
    Custom mode| 100 PSI| 2 – 160 PSI
    Ball mode| 8 PSI| 2 – 15 PSI

14. Switch unit
    Short press the light button to switch the air pressure display unit. Unit conversion formula: 1 BAR = 14.5 PSI

15. LED light (optional)
    Long press the light button (3 seconds) to turn on the LED light, a long press (3 seconds) again will turn it off .

16. Change air pressure (optional)
    Short press +/-: Adjust the preset air pressure value +/- 0.5 PSI.
    Long press +/-: You can quickly adjust the preset air pressure value.
    Note : The scene switching and the preset air pressure value software will be automatically saved, and the next time you use it, you only need to switch the scene, and the preset air pressure value will be automatically set.

17. Start pumping
    While the device is powered on, press the start-stop button briefly to initiate inflation. The inflnation process will automatically stop once the preset air pressure value is reached. The display will show the word “done”.

18. Turn off the device
    Press and hold the power button for 3 seconds to turn off the device.

Calibration

After powering on, ensure that the hose is not connected to the charging object. If the measured pressure value is not 0.0, simultaneously press the + and – key for 2 seconds. The display will return to normal after it is fully illuminated.

Note : This product is factory reset. However, due to altitude or sensor differences, if the measured air pressure value is not zero, manual reset can enhance air pressure accuracy. Calibration is not recommended at high temperatures.

Checking the Recommended Pressure
To ensure safety, prior to charging, please assess the requirements of the items to be charged by reviewing the instructions and other available resources. This precautionary step helps avoid any injuries resulting from overcharging-induced explosions.
Car Tires
The recommended air pressure range for car tires is indicated on the tire’s sidewall. Charging pressure is dependent on the load weight. For more precise air pressure recommendations, please consult the manual of the relevant vehicle.
Bicycle Tires
The recommended air pressure range for bicycle tires is marked on the sidewall of the tire. Charging pressure is contingent upon the load weight. For more detailed air pressure recommendations, please refer to the manual of the respective bicycle.
Balls
The recommended filling pressure for balls such as basketballs and volleyballs is specified around the filling holes. Charging pressure is related to the load weight. For more precise air pressure recommendations, please consult the manual of the respective ball.

Safety

When unscrewing the hose, both the hose and the joint may generate high heat due to prolonged use. Please avoid prolonged contact with them.

Specifications

Troubleshooting

tightened.
| 4. Check whether the inflated items are leaking.
|
Can’t inflate on boot| 1. Check whether the battery is fully charged.
| 2. Check whether the current tire pressure is higher than the preset value.
|
The preset pressure cannot be adjusted| Check if you choose the incorrect mode, select the Custom Mode to adjust the preset value in the range of 2 – 160 PSI.
|
Can do inflate but the air pressure display does not change| 1. Low-pressure products such as balloons are not within the measurable range of the device.
| 2. In the case of an empty tire, the tire pressure value can be displayed after a short period of inflation.
|
The inflator automatically shut down after connecting hose| The pump will shut down automatically after 3 minutes with no operation, long press the start button to restart.
|
There is leakage when connecting the hose| Tighten the hose.
|
The color of the power indicators in charging state is different from that in standby state| The power lithium battery has a significant voltage drop during the discharge process, which causes the color of the indicator light in the charging state and the standby state to be inconsistent. This phenomenon is not a malfunction.
|
The power indicator does not light up after charging| Replace with a safe and compliant charging cable and adapter to recharge.

Meaning of buttons

1. LED lighting
2. Hose port
3. USB output
4. Type-C input
5. Real-time air pressure
6. Preset air pressure
7. Battery indicator
8. Preset +
9. Mode selection
10. On / Off button
11. LED lighting switch / Unit switching
12. Preset –

EU-declaration of conformity
(EN ISO / IEC 17050-1)
Hereby we:

• Company : FlinQ Commerce
• Address : Eemweg 74 3755LD Eemnes The Nederland Declare under the sole responsibility that the following equipment: FlinQ Wireless Air Compressor Premium
• Brand: FlinQ
• Product name: FlinQ Wireless Air Compressor Premium
• Barcode / EAN: 8720955005838
• Product Rating: 60W
• Product type: Compressor
• Production date: 2024
• Produced in: China
• Authorized signature:
  • Signed by
• Name: Erwin Honing
• Title: CEO
• Place: 3755LD Eemnes, The Netherlands
  Date: 08-03-2024

Conforms that the listed products comply with the following safety and hazardous substance restrictions in electrical and electronic equipment requirements of the relevant European harmonization directives 2014/30 / EU, 2014/35 / EU, 2011/65 / EU, 2015/863 / EU and all modifications . Conformity is guaranteed by the CE symbol. This product has been tested according to harmonized standards and specifications of the Community legislation of the EU, the applicable versions are valid in 19- 01-2021 (2014/35 / EU) 19-05-2021 (2014/30 / EU) 19-05 -2020 (2015/863 / EU + 2011/65 / EU 2020) (test date). The full text of the EU declaration of conformity is available at the following internet address: www. flinqproducts.nl
TECHNICAL CHANGES SUBJECT TO FURTHER DEVELOPMENTS
Low Voltage Directive (LVD) 2014/35 / EU Electromagnetic Compatibility (EMC) Directive 2014/30 / EU Reduction of hazardous substances (ROHS) directive 2011/65 / EU + 2015/863 / EU

FAQ’s

Q: Can children use this product unsupervised?
A: No, children should not use this product unsupervised. Cleaning, maintenance, and operation should always be supervised by adults.

Q: What should I do if the device generates high temperatures or emits abnormal sounds during operation?
A: Turn off the device immediately to allow it to cool down. Do not use it again until it has cooled down.

Q: How should I store the product?
A: Store the product in a place away from combustible materials, moisture, sand, and extreme temperatures. Do not expose it to fire or discard it casually due to the lithium battery.

References

• FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later
• FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>