FLINQ Rechargeable Multi Trimmer User Manual
- October 27, 2023
- FlinQ
Table of Contents
FLINQ Rechargeable Multi Trimmer
INSTRUCTIONS
Read through this entire instruction manual before using the FlinQ 4-in-1 Trimmer Set. We’re dedicated to bring you well-designed products that make living fun and easy. We stand behind all our products and warrant this to be free from defects in workmanship and materials for 1 year from the date of purchase
HOW TO USE THE TRIMMER
CHARGING
- Fully Charging: 10-12 hours
- Rating Voltage: AC220-240V(50-60Hz)
- Close the power switch. Please insert the plug into the power socket. The indicator will flash if the trimmer is charging.
INSTRUCTIONS FOR HEAD REPLACEMENTS
To change attachments, hold the trimmer body with the switch side facing
towards
you. Turn the attachment and pull off. Position the replacement attachment at
the top of the trimmer body, then push down and attach.
USING THE TRIMMER
Remove blade cap. Slide the switch to the “ON” position. Carefully place the blade of the trimmer to your face to cut nose hairs. Use the same procedure for trimming your ears, sideburns and evebrow hairs or beard.
- NOSE/EAR TRIMMER
1. The Nose Trimmer is designed to remove unwanted hair from the nose or ear areas.
2. Gently approach the area to be trimmed. Never force the Nose Trimmer into nose or ear cavities as this can result in injuries.
3. If you experience any pain or discomfort when using this product STOP using it immediately.
4. Always clean the trimmer after use and use the cap to protect the Nose Trimmer head.-
EYEBROW TRIMMER
You can use this attachment for trimming unwanted eyebrow hairs, fine facial and ear hair, or any stray body hairs. -
SIDEBURN TRIMMER
You can use this attachment for smaller areas such as hairlines and sideburns. Hold the trimmer so the shaver screen gently touches your skin. Avoid holding the trimmer at an angle. This will distort the screen and may cause some skin irritation. -
BEARD TRIMMER
You can use this attachment to shave your beard slowly.
CLEANING & MAINTENANCE
Clean your personal trimmer regularly. Be sure switch is turned “OFF” before cleaning.
CLEANING WITH BRUSH
Never expose the trimmer body to water. To maintain lubrication, use the enclosed brush to clean the unit. Thoroughly brush and blow out hair clippings from the power handle.
CLEANING WITH WATER
Your trimmer’s attachments have rust-resistant, stainless steel cutting blades
that permit the cutting attachments to be rinsed under running water if you
choose. Do not wash attachments when attached to the trimmer. Always keep the
blade area pointed downwards when cleaning. Only after the unit has dried
completely, the attachment should be used.
Do not use harsh or corrosive cleaners on the unit or its attachments.
Do not apply pressure or hard objects to attachments.
FlinQ Commerce
Eemweg 74 3755 LD Eemnes
www.flinqproducts.nl
For support and warranty information:
[email protected]