FLINQ FQC8308 Smart Indoor Light E27 Instruction Manual
- June 1, 2024
- FlinQ
Table of Contents
FLINQ FQC8308 Smart Indoor Light E27 Instruction Manual
FQC8308
Welcome to the FlinQ family
Thanks for purchasing one of our items! To ensure continuous operation and accuracy, please read these operating instructions carefully before use and save this manual for future use. Passing certain procedures may result in incorrect reading and incorrect use of this product. We hope that you will enjoy using your new FlinQ-product! If by any chance the item is damaged, defective or broken, you are covered with warranty! Please do not hesitate to contact us for any questions, concerns or suggestions at the email address as mentioned in this manual.
Register your FlinQ product
We can imagine you want to treat your FlinQ item carefully.
Register your product and you will be entitled to the following:
Please read this manual thoroughly before using the product! Keep it at a safe place for future reference. This product can be used outdoors (see below for more info).
This appliance may be used (but not installed) by children aged 12 and over, and by persons with reduced physical, sensory or mental capacities or a lack of suffi cient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers.
Cleaning and maintenance must not be carried out by children without
supervision. Children must not be allowed to play with the appliance.
Keep the packaging material away from children. There is a risk of suff
ocation!
Do not allow unsupervised children to clean or maintain this device.
Warning
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suff ocation!
- Danger due to swallowing small parts. Keep these away from children. Risk of suff ocation!
- Dispose the packaging material immediately according to locally applicable regulations.
- Do not modify the product in any way. Doing so will void the warranty.
Specifications
Installation
Before you begin
Make sure your mobile device is running iOS 9 or higher or Android 5 or
higher. Verify your Wi-Fi network/name and ensure your mobile device is
connected to the same 2.4 GHz Wi-Fi network/name/router (5.0 GHz Networks are
NOT supported!).
IMPORTANT: Make sure that the lamp is set up, placed and covered inside the same Wi-Fi network as the router and mobile device during the 1st setup!
Download the FlinQ App
Search for ‘FlinQ’ in the Apple App Store or the Google Play Store and
download the application.
Register / Login / Profile
- Open the FlinQ application.
- Tap ‘agree’ to confi rm the privacy policy.
- To register, please enter your mobile phone numer or email address.
- Press ‘verifi cation code retrieval’
- Enter the verifi cation code that was sent to your phone number or email address.
- Create a password and login for the new app user. If you already have an existing account, please go to Login.
Note: Please note that only 2,4 GHz networks are supported. 5GHz networks will not work. Ask your provider how to turn on both frequencies.
Setup voice assistant
Note: Please note that only 2,4 GHz networks are supported. 5GHz networks will not work. Ask your provider how to turn on both frequencies.
- Google Home & Amazon Alexa
To control your device by using your voice via a smart speaker, please refer to the manufacturers instructions manual on how to enable a voice command through your device. Follow the installation steps on the next page first before you setup your voice assistant.
Installation
Install the E27 lamp
Notes: Please note that only 2,4 GHz networks are supported. 5GHz networks will not work. Ask your provider how to turn on both frequencies.
EU-declaration of conformity
(EN ISO / IEC 17050-1)
Conform that the products mentioned are with the following safety and hazardous substances restrictions in electrical and electronic equipment requirements of the relevant European Union harmonization directives 2014/30/EU, 2014/35/EU, 2011/65/EU, 2015/863/EU and all amendments. Conformity Is guaranteed by the CE symbol. This product has been tested following harmonized standards and EU community legislation specifications, applying versions will be valid in 19-01-2021(2014/35/EU) 19-05-2021 (2014/30/EU )19-05-2020 (2015/863/EU + 2011/65/EU 2020) (date of test ). The full text of the EU declaration of conformity is available at the following internet address: www.flinqproducts.nl TECHNICAL CHANGES SUBJECT TO FURTHER DEVELOPMENTS Low Voltage Directive (LVD) 2014/35/EU
Electromagnetic Compatibility Directive (EMC) 2014/30/EU
Reduction of Hazardous Substances (ROHS) Directive 2011/65/EU + 2015/863/EU
FlinQ Commerce
Eemweg 74
3755 LD Eemnes
The Netherlands
www.flinqproducts.nl
info@flinqproducts.nl
FlinQ Smart Indoor Light GU10
FQC8309
Welcome to the FlinQ family
Thanks for purchasing one of our items! To ensure continuous operation and accuracy, please read these operating instructions carefully before use and save this manual for future use. Passing certain procedures may result in incorrect reading and incorrect use of this product. We hope that you will enjoy using your new FlinQ-product! If by any chance the item is damaged, defective or broken, you are covered with warranty! Please do not hesitate to contact us for any questions, concerns or suggestions at the email address as mentioned in this manual.
Register your FlinQ product
We can imagine you want to treat your FlinQ item carefully.
Register your product and you will be entitled to the following:
Scan the QR code or go to flinqproducts.nl/registration
Please read this manual thoroughly before using the product! Keep it at a safe place for future reference. This product can be used outdoors (see below for more info).
This appliance may be used (but not installed) by children aged 12 and over, and by persons with reduced physical, sensory or mental capacities or a lack of suffi cient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers.
Cleaning and maintenance must not be carried out by children without
supervision. Children must not be allowed to play with the appliance.
Keep the packaging material away from children. There is a risk of
suffocation!
Do not allow unsupervised children to clean or maintain this device.
Warning
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suff ocation!
- Danger due to swallowing small parts. Keep these away from children. Risk of suff ocation!
- Dispose the packaging material immediately according to locally applicable regulations.
- Do not modify the product in any way. Doing so will void the warranty.
Specifications
Installation
Before you begin
Make sure your mobile device is running iOS 9 or higher or Android 5 or
higher. Verify your Wi-Fi network/name and ensure your mobile device is
connected to the same 2.4 GHz Wi-Fi network/name/router (5.0 GHz Networks are
NOT supported!).
IMPORTANT: Make sure that the lamp is set up, placed and covered inside the same Wi-Fi network as the router and mobile device during the 1st setup!
Download the FlinQ App
Search for ‘FlinQ’ in the Apple App Store or the Google Play Store and
download the application.
Register / Login / Profile
- Open the FlinQ application.
- Tap ‘agree’ to confirm the privacy policy.
- To register, please enter your mobile phone number or email address.
- Press ‘verification code retrieval’
- Enter the verification code that was sent to your phone number or email address.
- Create a password and login for the new app user. If you already have an existing account, please go to Login.
Note: Please note that only 2,4 GHz networks are supported. 5GHz networks will not work. Ask your provider how to turn on both frequencies.
Setup voice assistant
Note: Please note that only 2,4 GHz networks are supported. 5GHz networks will not work. Ask your provider how to turn on both frequencies.
Google Home & Amazon Alexa
To control your device by using your voice via a smart speaker, please refer to the manufacturers instructions manual on how to enable a voice command through your device. Follow the installation steps on the next page first before you setup your voice assistant.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>