FLINQ FQC8208 LED FLOORLAMP XYRO User Manual

June 5, 2024
FlinQ

FLINQ FQC8208 LED FLOORLAMP XYRO

Safety Information

Please read this manual thoroughly before using the product! Keep it in hand for future reference. Warnings alert the user to potential serious outcomes, such as injury or adverse events to the user. Cautions alert the user to exercise care necessary for the safe and effective use of the product. Notes contain important information that may be overlooked or missed. This product can be used indoors (see below for more info). This appliance may be used by children aged 6 and over, and by persons with reduced physical, sensory or mental capacities or a lack of sufficient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers. Cleaning and maintenance must not be carried out by children without supervision. Children must not be allowed to play with the appliance.  qKeep the packaging material away from children. There is a risk of suffocation! Do not allow unsupervised children to clean or maintain this device.

  • WARNING! Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suffocation!
  • DANGER due to swallowing small parts. Keep these away from children. Risk of suffocation!

SPECIFICATIONS

Input voltage: AC 100-240V / 50-60Hz
Rated output/input voltage lamp: DC 5V- 3A (3400mA) max with 2.5MT cable
Rated power: 18W
Energy label: A

Control method:

| RF433 soft touch wireless remote control with color, speed and dimming function and much more
Appearance color:| full dark black
Product height size:| 145cm 240mm240mm base foot
Light color:| RGB Symphony colors + Cool White + Warm White chosen at any way possible
Display index:| CRI>80
Number of lamp LED beads:| 225pcs
Product color temperature:| warm white (2700-3200K) / white (6000-6500K) / RGB Symphony Colors
Lumen:| 1650 for Warm White and 1800 for White/Cool White
LED life:| 25000 hours max.
Working temperature:| 0℃ ~ + 45℃
IP Grade:| IP20 (indoor use only)
Shell material:| PE White + metal iron spray paint
Net weight:| 2.78Kg
Lighting Symphony colors mode +/- :| +/- 238 lighting effects

REMOTE CONTROL

  • Buttons: 10x
  • Button function: ON/OFF, SYMPHONY START/PAUSE, SPEED +/-, BRIGHTNESS +/-, LIGHT SWITCH, SYMPHONIC MODE +/-, RING COLOR Remote control type: RF433 radio frequency remote control
  • Remote control distance: up to 30 meters (open area)
  • Remote control power supply: 3x AAA batteries
  • Control quantity: One remote control can control multiple lights (only for the single colors) or 1 light selectable for your choice
  • This product is a lifestyle product.
  • Read and follow the instructions contained in this manual carefully. Keep these instructions at a safe place for future reference.
  • The operating life of the product will be less if the ambient temperature is higher than 45°C or lower than -10°C.

Product general description and contents

  1. Lamp pole
  2. Lamp foot base
  3. Adapter + connection cable (2.5m) with USB plug
  4. RF Remote control
  5. installation bolt + tool and user manual

MAIN USE CAUTIONS BEFORE INSTALLATION:

NOTE

  • Choose a stable, solid and supportive surface and make sure the lamp is set correctly.
  • Make sure the cables cannot cause a trip hazard.
  • Make sure there is enough ventilation around the device and so not cover it at all times.
  • This lamp is intended for inside use and the main power adapter and remote control is not waterproof! Keep away from water and only use indoors. WARNING: Keep the external adapter out of reach of childrenNever charge this product in moisture conditions or in the rain. Only charge it indoors, in a dry place.
  • This is not a TOY, keep away from small children below 12 years.
  • Do not open or disassemble the lamp or adapter yourself, this will void the warranty at all times.
  • Do not disassemble, repair or modify the product by yourself as this may result into an electric shock.
  • Do not look directly into the lamp beads as it could hurt your eyes.
  • The led source is not replaceable.
  • If the cable or adapter is damaged or broken please contact your seller for correct replacement by the manufacturer only.
  • Do not stand, sit on, jump or throw with the lamp at all times.
  • Do not throw this product in the air as it may cause damage by falling.
  • Only use the lamp for its intended designed use as a light.
  • Take good care of the product and clean it regularly.
  • Never touch the plug contacts with sharp or metal objects.
  • Use only the original power supply and original accessories.
  • Do not use the device outdoors.
  • Protect the device from special liquids and vapors.

NOTE

  • Please note that the power port of the device should not be infiltrated by water. Otherwise, it will cause a product failure.
  • Do not charge or store the product in a place below 0℃ or above 40℃, otherwise the product performance will be reduced.
  • It is a normal phenomenon that temperature of the adapter rises during use.

INSTALLATION OF LAMP FOOT BASE WITH LAMP POLE

NOTE

  • Do not connect the power cable nor adapter to the power mains outlet yet!
  • Please check if the lamp set is complete according the package contents as described.
  1. Place the lamp pole carefully on a table that is protected by a soft cloth or towel etc.
  2. Take the lamp pole bottom screw side in one hand and bolt it with your other hand on the lamp foot base hole with the supplied tool and bolt. Fix it firmly but slow, carefully.
  3. Insert the USB connector cable end included into the approved adapter power connection to connect and insert it to the mains power outlet. The power adapter input is AC100-240V 50/60Hz with output from DC 5V-3A (3400mA) max. Keep in mind this adapter is NOT waterproof and needs to be used only INDOORS.

OPERATION AND REMOTE CONTROL USE

FLINQ-FQC8208-LED-FLOORLAMP-XYRO-4

First install 3x AAA (LR03) 1,5V batteries (not included, optional). To open the battery cover at the back side use a small coin to twist and open it at the side of the remote back cover (see picture).
Clean the battery contact and remote contacts before installing the batteries. Install the three batteries 1 by 1 and make sure to use the correct polarity + and – inside the remote control housing. Put the battery cover back into its place and make sure that all sides are correctly “clicked” and pushed inside the housing of the remote top housing.
The remote can be used for the change of colors, to dim the light, to speed up or down, start/pause function controls and more. The remote control is not waterproof! The maximum control distance is <30 meters without obstacles and in open space.
NOTE: Remove the batteries from the product if it will not be used for a long time (1 month or longer) or when the remote control is not working anymore (replace when needed).FLINQ-FQC8208-LED-FLOORLAMP-
XYRO-5

  1. ON/OFF
  2. START/PAUSE
  3. COLOR RING
  4. SPEED + / COLOR TEMPERATURE +
  5. SPEED – / COLOR TEMPERATURE –
  6. LIGHT SWITCH
  7. BRIGHTNESS –
  8. BRIGHTNESS +
  9. SYMPHONIC MODE –
  10. SYMPHONIC MODE +

BUTTON USE EXPLANATIONS

  1. ON/OFF >>> Put the lamp ON or OFF

  2. START/PAUSE >>> In the symphonic mode you can press to start and pause the lights way at any moment. Press the color ring first and then press start again, the light will now go into automatic play mode from first setting.

  3. COLOR RING >>> Short press or slide the color ring with your finger to select the desired color. When in normal white mode ( 1 color static) you can adjust the
    color temperature with this ring.

  4. SPEED + / COLOR TEMPERATURE + >>> When in symphonic mode or color mode you can increase the speed of the light. In white mode you can adjust the color temperature upwards.

  5. SPEED – / COLOR TEMPERATURE – >>> When in symphonic mode or Color mode you can decrease the speed of the light. In white mode you can adjust the color temperature downwards.

  6. LIGHT SWITCH >>> White mode colors only or switch back to Color/Symphonic mode.

  7. BRIGHTNESS – >>> The brightness can be decreased on both Color/Symphonic mode.

  8. BRIGHTNESS + >>> The brightness can be increased on both Color/Symphonic mode.

  9. sYMPHONIC MODE – >>> Several moving and special mode’s/colors etc can be selected downwards.

  10. SYMPHONIC MODE + >>> Several moving and special mode’s/colors etc can be selected upwards.

USE ONE REMOTE ON MORE LAMPS AT THE SAME TIME

One remote can be used on one lamp or with more lamps at the same time. You can “pair” the remote and the floorlamp within a range of <5 meters of the lamp.
To pair and use the remote with only 1 lamp in one room/space, please:

  1. Make sure the lamp is ON.
  2. Long press the LIGHT SWITCH button for 5-6 seconds, and the light will flash quickly 5x to confirm that is paired for 1 remote control now.

To pair and use the remote with more than 1 lamp in the same/more rooms/spaces (optional to buy more lamp sets separately at www.flinqproducts.nl ) please

  1. Make sure the lamp is ON.
  2. Long press the LIGHT SWITCH button for 5-6 seconds, the light will flash slowly 5x to confirm that the lamp is paired for the use with more than 1 remote control.

Note: Make sure when you to this process that other optional bought lamps are switched OFF before pairing.
SECURITY AND IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, certain precautions must be followed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

  1. This IP20 product is suitable for indoor use.
  2. Please use the rated input voltage power supply of the product as mentioned on the back label.
  3. Do not install near a gas device or other sources with a similar heating process.
  4. Do not use the product outside its intended use.
  5. Read and follow all instructions that are indicated on the product or supplied with it.
  6. Keep this manual for future reference.

INSTRUCTIONS FOR USE AND MAINTENANCE

In case of non-use, store the product in a cool and dry place away from direct sunlight.

CAUTION

NON-Replaceable LED lights!

TROUBLESHOOTING TIPS IF THE LIGHT DOES NOT WORK

Light does not turn on?

  • Button use >>> Try to power on/off by the button remote or re-connect the USB cable connection or adapter from the main power outlet.
  • Remote control not working >>> The RF signal maybe weak when there is a strong visible light or barrier. Normal range should be effective within 30 meters.
  • Button use >>> Try to power on/off by the button remote or re-connect the USB cable connection or adapter from the main power outlet.
  • Remote control not working >>> The RF signal maybe weak when there is a strong visible light or barrier. Normal range should be effective within 30 meters.
  • Not working >>> Is the battery full from the remote? Please replace and make sure the adapter is connected to the mains power and retry.
  • Poor distance >>> Use it inside a range of max. 30 meters without any obstacles. The battery runs out too quick?
  • Weak battery: We suggest only to use dry alkaline batteries from A-brands.

NOTE

If the lamp does not work or respond at any possible way by the remote please disconnect the power adapter from the mains power outlet and wait for at least 15min and then re-connect it again.

CLEANING THE DEVICE ITSSELF

This product is designed, produced and tested in accordance with the strictest European safety directive’s and test standards.

※ Make sure the lamp is kept dust free and clean. Clean it regularly with a dry anti-static cloth and with warm, soapy water but make sure that no water liquid can enter the lamp luminaire. Dry the lamp before turning it ON again.
※ Please do not immerse the main unit in water, it is not waterproof!
※ Wipe gently with a clean soft cloth (microfiber) dampened with water or a mild detergent.
※ Do not use a strong irritant lotion such as gasoline, alcohol or rubber water.

This product is designed, produced and tested in accordance with the strictest European safety directive’s and test standards.FLINQ-FQC8208-LED-FLOORLAMP-
XYRO-6

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT

Disposal Information

Separate collection
This symbol means the product must not be discarded with the general household waste. There is a separate collection system for these products.

WEEE, the waste electrical and electronic equipment directive.This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact
either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally
safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Do not dispose of batteries in your household waste. Dispose of batteries by taking them to your local recycling store or
station, contact your local government office for more details.
DISCLAIMER
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise)
regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not
limited to special, incidental, consequential or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the expressed written permission of the manufacturer.
Our company owns all right to this unpublished work and intends to maintain this work as confidential. Our company may also seek to maintain this work as an
unpublished copyright. This publication is to be used solely for the purpose of reference, operation, maintenance or repair of our equipment. No part of this can be disseminated for other purposes. In the event of inadvertent or deliberate publication, our company intends to enforce its right to this work under copyright laws as a published work. Those having access to this manual may not copy, disseminate or disclose the information in this work unless expressly authorized by our company. All information contained in this manual is believed to be correct. Our company shall not be liable for errors contained herein nor for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This publication may refer to information and protected by copyrights or patents and does not convey any license under the patent rights of our company, nor the rights of others. Our company does not assume any liability arising out of any infringements of patents or other rights of third parties described at any time without notice or obligation. Also, content of the manual is subject to change without prior notice.

Warranty

The warranty begins on the date of purchase and expires after 24 months. The warranty period is considered to have started three months after the date of manufacturing indicated on the product or as derived from the serial number of the product. If any defect due to faulty materials and/or workmanship occurs within the warranty period, we will make arrangements for service. Where a repair is not possible or is deemed uneconomical we may agree to replace the product. Replacement will be offered at our discretion and the warranty will continue from the date of original purchase. The warranty applies provided the product has been handled properly for its intended use and in accordance with the operating instructions. Support, warranty and questions information: info@flinqproducts.nl This product is designed, produced and tested in accordance with the strictest European safety directive’s and test standards.

FlinQ Commerce
Eemweg 74,3755 LD, Eemnes, The Netherlands
www.flinqproducts.nl
Support and warranty information:info@flinqproducts.nl
Flink is a trademark of FlinQ Commerce.
Other brands and product names, logos are tradenames or trademarks/logos of their rightful owners.
All specifications are subject to change without any official notice.
CREATED IN THE NETHERLANDS
ASSEMBLED IN CHINA

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals