FLINQ 2.0 Bath Bucket User Manual
- June 9, 2024
- FlinQ
Table of Contents
FLINQ 2.0 Bath Bucket
Instructions
Read through this entire instruction manual before using the new version FLINQ Bath Bucket. We’re dedicated to bring you well-designed products that make bathing fun and easy.
Specifications
- Brand: FlinQ
- Model: Bath Bucket Premium
- Size: 932 mm x 522 mm x 640 mm
- Weight: About 5 kg per set
- Capacity of water: 165 L
- Materials: PP plastic
- Battery: 2 x LR44 / 2 x AG13
Accessories
- 1x water drain pipe
- 1x water plug and water pipe joint
- 1x hanging basket
- 1x anti-skid cushion
- 1x small bailer
Installation steps
- Put the water plug on inside and water pipe joint on outside.
- Connect the drain pipe on outside joint.
- Place the anti-skid cushion in the bath.
- Place the hanging basket on the side of Bath Bucket.
- Pull out the battery insulation sheet of the electronic thermometer, then the temperature will be displayed.
Attention
- When putting in warm water, the recommended temperature is between 37 and 38 degrees Celsius to avoid scalding. Keep water about 1/2 or 2/3 height of bath bucket to avoid spillage after getting in.
- When you are done bathing, open the drain plug and the water will flow out. If there is some water left in the bucket, please do not pour it from the end which has the electronic thermometer.
- The button batteries can last for about a year. When the batteries run out, they can be replaced. The battery model is LR44 or AG13.
FlinQ Commerce
Eemweg 74, 3755 LD Eemnes
www.flinqproducts.nl
For support and warranty information:
info@flinqproducts.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>