FlINQ FQC8222 Clixx Wireless Earbuds User Manual

June 9, 2024
FlinQ

FlINQ Logo FLINQ CLIXX WIRELESS EARBUDS
FQC8222/8223/8224/8225FlINQ Clixx Wireless
Earbuds V1 User Manual

FQC8222 Clixx Wireless Earbuds

Thanks for purchasing this FlinQ product!
To ensure continuous operation and accuracy, please read these operating instructions carefully before use and save this manual for future use. To skip certain procedures may result in incorrect reading and use. We hope that you will enjoy using your new product!
If by any chance the item is damaged, defective or broken, you are covered with warranty! Please do not hesitate to contact us for any questions, concerns or suggestions at the email address as mentioned in this manual. We deserve the right to make technical and design modifications in the course of continuous product development. Read and follow the instructions contained in this manual carefully.
Keep these instructions at a safe place for future reference.

Safety Information:

Please read this manual thoroughly before using the product! Keep it in hand for future reference.
Warnings alert the user to potential serious outcomes, such as injury or adverse events to the user.
Cautions alert the user to exercise care necessary for the safe and effective use of the product. Notes contain important information that may be overlooked or missed.
This product can be used indoors and outdoors (see below for more info).
This appliance may be used by children aged 12 and over, and by persons with reduced physical, sensory or mental capacities or a lack of sufficient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers.
Cleaning and maintenance must not be carried out by children without supervision. Children must not be allowed to play with the appliance.
Keep the packaging material away from children. There is a risk of suffocation!
Do not allow unsupervised children to clean or maintain this device.

  • WARNING! Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suffocation!
  • DANGER due to swallowing small parts. Keep these away from children. Risk of suffocation!

Avoid danger to life by electric shock:

  • Do not operate the unit with a damaged power line or damaged power plug.
    ATTENTION! Damaged power lines represent danger to life by electric shock.

  • Check the power lines regularly for damages and aging. If the power line is damaged, it must be re- placed by the manufacturer, his / her representative or a similarly qualified person in order to avoid safety hazards.

  • Protect the power line against sharp edges, mechanical strain and hot surfaces.

  • Do not switch on the unit if you notice visible damages (e.g. tears or cracks) or if you assume that the unit is damaged (e.g. after having fallen down).

NOTE/WARNINGS:

  • Do not open the device yourself.
  • This device is not a TOY, Keep away from children!
  • Do not use with appliances that could cause any fire in unattended use (like irons etc.) delete.
  • Any other use as the intended way for this device is not validated for any warranty or liability.
  • This device is only used for domestic and private use.
  • Do not use the earbuds excessively and do not store them under heavy pressure. The earbuds are not resistant to heat and water.
  • Keep the earbuds away from the WIFI router or other high-frequency equipment and walls etc. to prevent interruption of signal reception.
  • Use the earplugs in working range (max. 10 meters). The effect will be significantly better if there are no obstacles between the connected devices.
  • Use these Bluetooth earphones with any device with Bluetooth stereo function.
  • Do not press the earbuds too hard into the charging station if you want to charge them! A soft “magnetic click” indicates that they have been placed correctly. The LED light turns red when charging starts.
  • When using the earbuds again, please keep them upright when you remove them from the charging station to prevent damage.
  • If you are wearing a pacemaker or other electronic medical device, you should seek your doctor’s advice before using this product.
  • Avoid rain, dampness or contact with other liquids
  • To prevent possible hearing damage, do not listen at high volume for long periods!

Specifications:

TWS (True Wireless Stereo); Clixx wireless design, individual channel left and right, HIFI True stereo sound with deep bass quality. Both the left and right earbuds are connected via Bluetooth. These can be used individually or as a pair.

Bluetooth version: V5.1+ BR+EDR Specification
Bluetooth mode:01.” AzDP1.3/HFP1.5/AVCTP 1.4/AVDTP 1.3/AVRCP 1.5 / AAC/SBC
IP Grade: V IP-XL, splash proof
Battery status indicator support: yes*
Talk/Music playtime a set of earbuds (L+R) mode: 6-8hours
Stand by time a set of earbuds (L+R Connect Phone ) mode: 3o hours max.*
Charge time docking case: 12o minutes max.
Charge time for earbud(s): 12o minutes max.
Docking case capacity to re-charge the earbuds: 3 times max. for both

earbuds, or 6 times for a single earbud.
Battery docking case:| 400mAh Lithium Ion Battery
Battery earbuds:| 4omAh Lithium Ion Battery
USB charging:| DC 5V IN IA (i.000mA) max
Wireless frequency:| 2.400-2.480 GHz
Wireless distance:| a.o meters max
Speaker driver frequenc;:| 20 – 20K Hz
---|---
Speaker driver size:| aomm
MIC:| apcs (-42db±3db) Omnidirectional
Speaker:| aomm (32 Ohm) Dynamic type
Output power:| aomW (2x 5mW)
Rated Power:| 2X 0.2W
Sensitivity:| gg±3dB S.P.L at aKHZ amW
Microphone SNR (Signal Noise Ratio):| >58db
Weight:| 55 gram (single earbud 5g)
Dimensions:| 64x55x26mm

*Note: Depends on phone brand, type and / or model
This product is a earbud product.
Read and follow the instructions contained in this manual carefully. Keep these instructions at a safe place for future reference.
The operating life of the product will be less if the ambient temperature is higher than 45°C or lower than -10°C.

Highlights

  1. Dust-proof mesh
  2. Multifunction button
  3. Microphone
  4. Charging connection point
  5. LED light charging station
  6. Type-C charging port

FlINQ Clixx Wireless Earbuds - Fig 1

MAIN USE CAUTIONS BEFORE FIRST USE:
NOTE:

  • Make sure the cables cannot cause a trip hazard.
  • This device is intended for inside and outside use but it is not fully waterproof IP6x grade.
  • This is not a TOY, keep away from small children below 6 years.
  • Do not open or disassemble the device yourself, this will void the warranty at all times.
  • Do not disassemble, repair or modify the product by yourself as this may result into an electric shock.
  • The led source is not replaceable.
  • If the cable is damaged or broken please contact your seller for correct replacement by the manufacturer only.
  • Do not stand, sit on, jump or throw with the device at all times.
  • Do not throw this product in the air to avoid damage caused by falling.
  • Only use the device for its intended designed use.
  • Take good care of the product and clean it regularly.
  • Never touch the plug contacts with sharp or metal objects.
  • Use only the original supply and original accessories.
  • Protect the device from special liquids and vapors

NOTE:

  • Please note that the power port of the device should not have water infiltration. Otherwise, it will cause a product failure.
  • Do not charge or store the product in a place below 0 ℃ or above 40 ℃, otherwise the product performance will be reduced.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
Do not install near a gas, electric radiator, fireplace, candles, or other sources with a similar heat.
Do not staple, nail, or hook the power cable.
Never touch the plug contacts with sharp or metal objects.
Do not hang the device only by the electric cables.
An electric product is not a toy! To avoid the risk of fire, burns, injuries or electric shock, the power cable should not be left within the reach of children.
Do not use the product outside its intended use.
Do not hang ornaments or other objects on the device cables.
Do not close windows and doors on the power cord so as not to damage the insulation.
Do not cover the product with a material (paper, cloth, etc.) that is not part of the product when in use.
Read and follow all instructions that are indicated on the product or supplied with it.
Keep this manual for future reference.
OPERATION AND CONTROL USE:
AUTO ON/OFF:

This product is made with an auto sensor switch to turn the earbuds on and off automatically when you
open or close the lid from the docking case. Open the lid is auto ON, close the lid is auto OFF.
TIP: The earbuds can also be manually set ON and OFF by the touch sensor button.
PAIRING:

  1. Pair with 1 earbud:
    a) Open the docking case, the sensor switch will power it on, then the left and right earbuds will be paired to each other automatically. Then choose 1 of the 2 earbuds and close the case.
    b) Turn on Bluetooth on your mobile device and select “FlinQ Clixx Wireless Earbuds” from the list. You will then hear a voice that says that you are “connected”. From now on you can listen to music and you are able to receive calls. The Clixx Wireless earbuds also supports incoming calls.
    *Note:
    During phone calls only 1 earbud works (depends on phone brand and / or model), you can keep the other earbud in the charging dock. When take out the other earbud to use, the both earbuds will connect each other automatically to be synchronized including the memory function.

  2. Pair with both earbuds:
    a)Open the docking case, the sensor switch will power it on, then the left and right earbuds will be paired to each other automatically. Take out both of the 2 earbuds, the right earbud work as host.
    b)Then enable Bluetooth on your device and select ” Flinq Clixx Wireless Earbuds” from the list. When the LED light slowly blinks blue, the earbuds have been successfully connected. The battery status is visible on your mobile phone (if supported).
    c)You will hear the message “connected” for verification.
    Note:
    During phone calls two earbuds can work, and on both sides you can control Power off/Play/Pause individually during the connection. The other earpiece is then synchronized. The memory function is automatically supported when reconnecting both devices (both earbuds and the device) that were used last time!

CHOOSE MOST COMFORTABLE EARTIPS FOR YOUR EARS:
Please check first if the MEDIUM size tip is fitting properly in your inner eardrums. If it’s good, comfortable and fitted well and it closed up well your eardrums inside size then no need to change it. If needed to change see below:
Pull firmly to remove the MEDIUM installed size’s when needed.
To attach the SMALL or LARGE tip’s push it until it “clicks” properly.
Bluetooth use:

  1. Making phone calls:
    Make sure the earbuds are connected to your mobile device. You can call now. With phone calls, 1 or 2 of the earbuds works. You will hear the telephone number when you receive a call.
    You answer the call by pressing the right or left touch button once. To reject the call, press 2x quickly the right or the left touch button so the call is rejected. When the earbuds are in music or standby mode, you can call the last telephone number again by pressing the right touch button 3x quickly. You can change the volume by pressing the touch button 2x shortly on the right headset for volume + and 2x shortly on the left touch button headset for volume – or change it by the volume buttons from your device directly.
    For Apple users that use SIRI: 3x quickly press on the left multifunction button headset to activate it.

  2. Listen to your music
    Make sure that the earbuds are connected to your mobile device. You can now listen to the music on your playlist. 1x short press the touch button to stop the music. Press the button again to continue. Long press the right touch button till the beep is heard for the next song and long press the left touch button till the beep is heard for the previous song.

  3. Power off
    Hold down the touch button until the LED light shows red. The Bluetooth device switches off, even when the earbuds are both connected as a set. If the earbuds have been removed from your Bluetooth device for more than 5 minutes, they will switch off automatically. You do not have to worry about empty battery.

  4. Charging
    You will hear a reminder sound when the battery is low. At the same time, the LED light will turn red on the earbuds. Place the earbuds inside the docking case and close the lid. During charging, the LED light turns red (to check open the lid a little bit to see the leds working), and it switches off automatically when it is fully charged.
    If both earbuds are empty and also the docking case, please re-charge the docking case at first with the Type-C charge cable. The docking case will be charged firstly (led with flash 1,2,3 till 4 leds all will ON 1 by 1 till full) and when full it will automatically charge the earbuds till full (led will be ON from 4, 3, 2 till 1 led 1 by 1 till empty) and then switch auto off.
    Note: the earbuds will be switched off automatically during charging.

Note:
New batteries must be recharged and discharged 3 ~ 5 times before their full function use time is released. Disconnect from the charger when the battery is fully charged, as overcharging can shorten battery life. When not in usage, the charge in a fully charged battery slowly disappears. Do not place the product near a heat source or expose it to direct sunlight, dust, moisture, rain or mechanical impact. Try to keep the battery temperature between 0°C and 45°C at all times. If the battery is too hot or too cold, the product may not work temporarily, even if it is fully charged. Do not attempt to charge the device when the battery is damaged. Never insert metal objects in any opening of the USB charging port.
The rechargeable battery is built into the device and cannot be replaced.
Do not throw the battery into the fire, otherwise it may explode. Batteries may also explode if being damaged, please handle and disposal it according to local conditions and regulations.
**HIGHLIGHT NOTES:
** When the earbuds are switched OFF and ON it will automatically re-connect to the last paired device, if not done automatically please press 1x short the left or right button to re-connect it.
If a paired BT enabled device is in range, the device will connect automatically when it’s in range.
If you would like to connect the device to another BT enabled device, you must first disconnect it manually in your BT device list or switch off your BT.

  • Battery indication on iOS devices and some other brands when applicable.
  • Power save function: If the earbuds are not successfully connected within 5 minutes, they will automatically shut down.

TROUBLESHOOTING TIPS:

  1. Do not use the earbuds excessively and do not store them under heavy pressure. The earbuds are not resistant to heat and water.
  2. Keep the earbuds away from the WIFI router or other high-frequency equipment and walls etc. to prevent interruption of signal reception.
  3. Use the earbuds in working range (max. 10 meters). The effect will be significantly better if there are no obstacles between the connected devices.
  4. Use these Bluetooth earphones with any device with Bluetooth stereo function.
  5. Do not press the earbuds too hard into the charging station if you want to charge them! A soft “magnetic click” indicates that they have been placed correctly. The LED light turns ON when charging starts.
  6. When using the earbuds again, please keep them upright when you remove them from the charging station to prevent damage.
  7. Please make sure the headset volume adjustment button is at the minimum volume, and can be adjusted to the appropriate volume.
  8. If the earbuds have been removed from your Bluetooth device for more than 5 minutes, they will switch off automatically. You do not have to worry about empty battery.
  9. If the earbud cap is too big or small, pls change it to match well with your inner eardrum size.

RESET PROCEDURE (MAKE SURE THE EARBUDS AND CHARGE CASE ARE FULLY LOADED!):

  1. TAKE OUT THE EARBUDS FROM THE CHARGE CASE , PRESS THE TOUCH BUTTONS ON RACH SIDE FOR ABOUT 12SEC
  2. DURING THIS PROCESS THE EARBUDS WILL POWER OFF AND ON AGAIN AND CLEAR their PARING LIST
  3. PLACE BOTH EATBUDS BACK INTO THE CHARGE CASE AND CLOSE THE LID
  4. OPEN THE LID AGAIN AND THE EARBUDS WILL GO on AND INTO PAIRING MODE AGAIN
  5. FOLLOW THE STEPS AS MENTIONED ABOVE IN THIS MANUAL FOR THE PAIRING PROCEDURE

SECURITY AND IMPORTANT SAFETY INSTRUCTIONS:
When using electrical products, certain precautions must be followed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
This IP-X3 product is suitable for indoor and outdoor use but it’s not fully waterproof IP-6x, do not submerse under water!
Please use the rated input voltage power supply of the product as mentioned on the back label.
Do not install near a gas device or other sources with a similar heating process.
Do not use the product outside its intended use.
Read and follow all instructions that are indicated on the product or supplied with it.
Keep this manual for future reference.
INSTRUCTIONS FOR USE AND MAINTENANCE:
In case of non-use, store the product in a cool and dry place away from direct sunlight.
CAUTION:

  • NON-Replaceable LED lights!

Please note:
A) Please enjoy music at a moderate volume to prevent adverse effects on the hearing
B) Please don’t wear when driving or cycling to affect safety.
C) Product specifications are subject to change without notice.
D) If disassemble the headset without authorization, we cannot guarantee the quality.

****CLEANING THE DEVICE:

※ Make sure the device is kept dust free and clean. Clean it regularly with a dry anti-static cloth and with warm, soapy water but make sure that no water liquid can enter the lamp luminaire. Dry the device before turning it ON again.
※Please do not immerse the main unit in water, it is not waterproof!
※ Wipe gently with a clean soft cloth (microfiber) dampened with water or a mild detergent.
※ Do not use a strong irritant lotion such as gasoline, alcohol or rubber water.

FlinQ Commerce
Eemweg 74,3755 LD, Eemnes, The Netherlands
www.flinqproducts.nl
Support and warranty information : info@flinqproducts.nl
FlinQ is a trademark of FlinQ Commerce.
Other brands and product names,logos are trandenames or
trademarks/logos of their rightful owners.
All specifications are subject to change without any official notice.
CREATED IN THE NETHERLANDS
ASSEMBLED IN CHINA
COPYRIGHT

WASTE ELETRICAL & ELECTRONIC EQUIPMENT
Disposal Information
Separate collection.
This symbol means the product must not be discarded with the general household waste. There is a separate collection system for these products.
WEEE, the waste electrical and electronic equipment directive This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Do not dispose of batteries in your household waste. Dispose of batteries by taking them to your local recycling store or station, contact your local government office for more details.
DISCLAIMER
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the expressed written permission of the manufacturer. Our company owns all right to this unpublished work and intends to maintain this work as confidential. Our company may also seek to maintain this work as an unpublished copyright. This publication is to be used solely for the purpose of reference, operation, maintenance or repair of our equipment. No part of this can be disseminated for other purposes. In the event of inadvertent or deliberate publication, our company intends to enforce its right to this work under copyright laws as a published work. Those having access to this manual may not copy, disseminate or disclose the information in this work unless expressly authorized by our company. All information contained in this manual is believed to be correct. Our company shall not be liable for errors contained herein nor for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This publication may refer to information and protected by copyrights or patents and does not convey any license under the patent rights of our company, nor the rights of others. Our company does not assume any liability arising out of any infringements of patents or other rights of third parties described at any time without notice or obligation. Also, content of the manual is subject to change without prior notice.

Warranty

The warranty begins on the date of purchase and expires after 24 months. The warranty period is considered to have started three months after the date of manufacturing indicated on the product or as derived from the serial number of the product. If any defect due to faulty materials and/or workmanship occurs within the warranty period, we will make arrangements for service. Where a repair is not possible or is deemed uneconomical we may agree to replace the product. Replacement will be offered at our discretion and the warranty will continue from the date of original purchase. The warranty applies provided the product has been handled properly for its intended use and in
accordance with the operating instructions.
** Support, warranty and questions information: : info@flinqproducts.nl**  This product is designed, produced and tested in accordance with the strictest European safety irective’s and test standards.

EU DECLARATION OF CONFORMITY

Hereby we,| Conform that the products mentioned are with the following safety and hazardous
---|---
EC – REP Company:| Substances restrictions in electrical and electronic equipment requirements of the relevant European Union harmonization directives 2014/53/EU, 2014/30/EU,
FlinQ Commerce| (EC)2019/1021, (EC)NO 850/2004, (EC)NO 1907/2006, (EU)2015/863, (EU)2017/2102,
Address| 2011/65/EU, 2012/19/EU and all amendments. Conformity Is guaranteed by the CE
Eemweg 74,| Symbol. This product has been tested following harmonized standards and EU
3755 LD Eemnes,| Community legislation specifications, applying versions will be valid in May  2021. T
The Netherlands| Thefull text of the EU declaration of conformity is available at the following internet
Declare under the sole responsibility that the following equipment:| address: www.flinqproducts.nl
TECHNICAL CHANGES SUBJECT TO FURTHER DEVELOPMENTS
Product Rating: DC 5V –1A (1000mA) max| HARMONISED STANDARDS
Product type:| EN 55032 : 2015 EN 55032 : 2017 EN 61000-3-2: 2014 EN 61000-3-3: 2013 EN 301 489-1 V2.2.3(2019-11)
EN 301 489-1 V2.2.3(2020-07) EN 300328 V2.2.2(2019-07) EN 62368:2014+A11:2017
Authorized signature:| EN 62479:2010
Name Erwin honing| EU COMMUNITY LEGISLATION
Title CEO FlinQ commerce| Electromagnetic Compatibility Directive (EMC) 2014/30/EU Radio Equipment Directive (RED) 2014/53/EU
Reduction of Hazardous Substances (ROHS) Directive 2011/65/EU + 2015/863/EU and (EU)2017/2102
Place| REACH Regulation 1907/2006 Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU
Regulation on Persistent Organic Pollutants (POP) 2019/1021
Date/Date:31-05-2021| ****Battery Directive 2013/56/EU Product Safety Act PAH AfPS GS 2019:01 PAK

FlINQ Logo

Documents / Resources

| FlINQ FQC8222 Clixx Wireless Earbuds [pdf] User Manual
FQC8222 Clixx Wireless Earbuds, FQC8222, Clixx Wireless Earbuds, Wireless Earbuds, Earbuds
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals