kogan NBJARMOPENA Electric Mason Jar Vacuum Sealer Kit User Guide
- August 9, 2024
- Kogan
Table of Contents
kogan NBJARMOPENA Electric Mason Jar Vacuum Sealer Kit
Product Information
- The Electric Mason Jar Vacuum Sealer Kit, model NBJARMOPENA, is designed for sealing mason jars to maintain food freshness.
- It features a USB-C charging port for convenient charging, an LED digital display for easy operation, and interchangeable sealing converters for regular and wide-mouth mason jars.
Product Usage Instructions
- Before using the product, ensure that the silicone rings are properly installed and do not detach during operation.
- Connect the provided USB-C charging cable to the charging port and a power adapter to charge the device.
- Ensure the silicone rings are correctly installed on the sealing converters.
- Correctly select the required sealer based on the jar type.
- Place food in the mason jar, not exceeding the lower thread of the jar mouth.
- Clean the jar mouth and sealing cap thoroughly.
- Align the bottle cap with the jar mouth.
- Position the sealer on the jar mouth and press down to compress the cap.
- Press the ‘Power’ button to start the vacuum process. Press again to stop once the air is evacuated.
FAQ
- Q: Can I use this sealer for jars of different sizes?
- A: The sealer comes with interchangeable converters for regular and wide-mouth mason jars, suitable for 70mm and 86mm sizes respectively.
SAFETY & WARNINGS
- The working voltage of this product is DC 3.7V. Fully charge it before use.
- None of the accessories of this product should be sterilized in microwave ovens to avoid damage from thermal deformation.
- Do not immerse the main unit in water or other liquids, and do not wash it under running water. It is strictly forbidden to wash any parts at temperatures above 60°C.
- Do not use steel wool, abrasive cleaners, or corrosive liquids (such as gasoline or acetone) to clean the product.
- Do not place any parts of this product in the dishwasher.
- This product is not waterproof.
- Do not plug in or unplug the charging cable with wet hands.
OVERVIEW
1
| ****
USB-C charging port
| Connect one end of the provided USB-C charging cable to the USB-C charging
port and the other end to a power adapter (not provided) to charge the
product.
---|---|---
2
| ****
LED digital display
| · Working time display.
· Power display.
· Charging display.
3
| ****
Keystrokes
| · Press to start or stop.
· Press and hold to view power.
| 4 | Main unit |
|---|---|
| 5 | Regular mouth sealing converter |
mason jar/removable.
6
| Wide mouth sealer sealing silicone ring| During use, check that the
silicone ring is installed properly, and do not let the silicone ring break
away from the main unit.
---|---|---
7| Wide mouth sealer| Suitable for 86mm wide mouth mason jar.
8
| Regular mouth sealing converter silicone ring| During use, check that the
silicone ring is installed properly, and do not let the silicone ring break
away from the main unit.
---|---|---
9| Regular mouth sealing converter| Remove it from the main unit when
you need to use the wide-mouth seal.
OPERATION
- Correctly select the required sealer (wide mouth or regular mouth).
- Put the food into the mason jar, ensuring it does not fill beyond the lower thread of the jar mouth for optimal vacuum sealing.
- Wipe the mouth of the jar and the sealing cap clean, ensuring there is no dirt or liquid residue.
- Align the bottle cap with the mouth of the jar (see the image below).
- Align the electric mason jar sealer with the mouth of the jar and press down until the sealer compresses the bottle cap (see the figure below).
- Press the ‘Power’ button to start the machine. Once the air is evacuated from the jar, press the ‘Power’ button again to stop the machine (see the image below).
Notes
- Due to the vacuum pressure generated between the electric mason jar sealer and the jar mouth, apply greater force during the pressing process to ensure the sealer is tightly pressed against the bottle cap.
- Charge the device promptly when the power display is below 20%.
- It is recommended to vacuum for at least 40 seconds.
- To remove the regular mouth sealing converter from the main body, rotate the regular mouth sealing converter counterclockwise. After hearing a click, pull the converter upwards to remove it.
SPECIFICATIONS
- Charging Voltage: DC5V
- Charging Current: IA
- Power Rating: <5W
- Plastic Material: ABS, silicone
TROUBLESHOOTING
| Problem | Solution |
|---|---|
| Wide-mouth mason jars won’t seal. | Check whether there are particles or |
liquids in the sealing area of the mason jar bottle mouth and lid. If there
are any, wipe it clean.
Check whether the sealing silicone ring in the wide-mouth sealing area is
offset, if so, install it in place.
Check whether the sealer is pressed to the bottom when using the sealer. If
you cannot be sure, repeat the operation to ensure that the sealer is pressed
to the bottom.
If sealing liquid items, keep the liquid items under the mason jar thread to
ensure a reliable sealing effect.
Regular mouth mason jars won’t seal.| Check the above four points.
Check whether the regular mouth sealer has been inserted into the sealing
silicone ring in the wide mouth sealing area. If you are not sure, repeat the
operation to ensure that it is completed as required.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>