MiBOXER TR-PZ AC Triac Dimmer Zigbee 3.0 Plus 2.4G Plus Push User Guide

MiBOXER TR-PZ AC Triac Dimmer Zigbee 3.0 Plus 2.4G Plus Push

Feature

Simple appearance design, convenient construction, Wide application for single color triac LED lights, filament lamps, Halogen lamps.

• Zigbee 3.0 standard protocol
• Smartphone APP control (need to buy Zigbee 3.0 gateway)
• 2.4G RF wireless remote control
• Push dimming function
• Trailing edge phase-cut technology
• 0~100% stepless dimming and flicker free
• Lowest brightness setting function
• Built-in temperature detecting switch, over heart /loading protection
• Auto transmitting function, unlimited control distance
• Screw connector is reliable and easy to do installation
• Anti-fire PC shell is more safety

Various control solution

Parameter

• Model No.: TRI-PZ
• Input Voltage: 100-240V~ 50/60Hz
• Output Voltage: 100-240V~
• Output Current: Max 2.27A
• Output Power: 250W @110V; 500W @220V
• Dim Method: Zigbee 3.0 + 2.4G + Push
• Working Temperature: -10~40°C
• Zigbee Control Distance: 100m (open area)
• 2.4G RF Control Distance: 30m

Connection Diagram

Attention Please check and ensure that all cable had done correct connection before turn on it, otherwise the dimmer is easy to be damaged.

“Breaker mode” is activated or shut down
Attention : It only support to turn on/off light, user can not dim device once this mode is activated

Turn On: short press “LINK” 5 times quickly, mode had activated once indicator blink 3 times quickly
Turn Off: short press “LINK” 5 times quickly, mode had shut down once indicator flash 3 times slowly
APP ON/OFF, review page 13

PUSH Dimming

Short press PUSH switch:
Turn ON/OFF light

Long press PUSH switch:

• Stepless dimming brightness.
• Long press and release your finger, then repeat long pressing to increase or decrease brightness.
• Please long press switch 20 seconds until all lights have same brightness with 100% level if multi dimmers had connect with same self-return switch. The quantity of dimmers which connect with same self-return switch can not be over 25 pieces, the connection cable of self-return switch can not be over 20m.

Remote control instruction

Link remote
For K1 remote

1. Learning code
   Way 1: short press “ LINK ” one time.
   Way 2: power off dimmer 10 seconds and power on again
   Way 3: short press Push switch (ON – OFF)

2. Press “SET” 3 times within 3 seconds, linking code is done once the light flashes 3 times slowly

For other remote

1. Learning code
2. Press “ ” any “ ” button in group zones 3 times within 3 seconds, linking code is done once the light flashes 3 times slowly

Unlink with remote

For K1 remote

1. Learning code
2. Press “SET” 5 times within 3 seconds, unlinking is done once the light flashes 10 times quickly

For other remote

1. Learning code
2. Press “ ” any “ ” button in group zones 5 times within 3 seconds, unlinking is done once the light flashes 10 times quickly

Compatible remote (purchase separately)

Auto transmitting
One light can transmit the signals from the remote control to another light within 30m, as long as there is a light within 30m, the remote control distance can be limitless.

Attention : All dimmer must link with same remote

Set up min brightness

Set up min brightness with “ SET ” button
Short press “SET” to get 10 kinds of brightness: 3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%

Set up min brightness with remote
This function should be paired with remote firstly before setting.

For K1 remote

1. Long press “SET” 3 seconds until the light flashes one time, indicator is going into flashing status
2. Short press “SET” to get 10 kinds of brightness: 3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%
3. Short press rotating button to confirm setting or waiting for 10 seconds to be confirmed automatically, the light will recover brightness to previous level.

For other remote

1. Long press the “OFF” button on the remote or “O” button on the zone, until the light flashes one time, indicator is going into flashing status
2. Short press the “OFF” button on the remote or “O” button on the zone to set up 10 different brightness (3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%)

Short press any button except “OFF” to confirm setting or waiting for 10 seconds to be confirmed automatically, the light will recover brightness to previous level
Attention : Master OFF button can set up lowest brightness for all connected dimmer

Smartphone APP control instruction

Added Zigbee 3.0 gateway into “TUYA Smart” App (please review instruction of Zigbee 3.0 gateway )
Pairing Network

1. Connect with power supply

2. Pairing network (attention: factory default is pairing network)
   Way 1: Long press “LINK” about 3 seconds until indicator flashes quickly
   Way 2: Long press push switch 10 seconds while light is OFF status (attention: need to wire with Push switch)

3. Open “ TUYA Smart ” APP to click Zigbee gateway, then click “ Add sub device ”

4. Click “ Indicator is flashing quickly ”

5. Support APP dimming or group control and etc once added successfully

App set up lowest brightness
The light is off once dim brightness into 1%, please increase lowest brightness
Setting way:

1. Click “Settings” in APP
2. Move slip to finish setting

Breaker Mode (ON/OFF)
Attention: It only support to turn on/off light, user can not dim device once this mode is activated
Setting way:

1. Click “ Settings ” in APP
2. Click button on the right side of “ Breaker Mode ”

Philips Hue control instruction

Added “Philips Hue” into APP
Pairing Network

1. Connect with power supply

2. Pairing network (attention: factory default is pairing network)
   Way 1: Long press “LINK” about 3 seconds until indicator flashes quickly
   Way 2: Long press push switch 10 seconds while light is OFF status
   ( attention : need to wire with Push switch)

3. Open “Philips Hue” App to click “SETTINGS” and click “Lights”

4. Click “+” on the top of right corner

5. Click “Search”

6. Click “Start configuration”, Follow the app instruction to complete configuration

Alexa voice control instruction

Alexa control (Audio support Zigbee 3.0 protocol)
You can connect directly if your Amazon ECHO already is built-in zigbee 3.0 protocol, following model with zigbee 3.0 protocol:
Amazon ECHO Plus ( 2nd Gen), ECHO (4th Gen), ECHO Studio, ECHO Show (2. Gen)

Pairing Network

1. Connect with power supply
2. Pairing network (attention: factory default is pairing network)

Way 1: Long press “LINK” about 3 seconds until indicator flashes quickly
Way 2: Long press push switch 10 seconds while light is OFF status
(attention: need to wire with Push switch)

Say to Amazon ECHO
“Alexa, Discover devices”
Wait for a while to discover device,
Voice control is activated

Alexa control (Audio don’ t support Zigbee 3.0 protocol)
Please add device into Miboxer Zigbee 3.0 gateway if your Alexa don’t support zigbee 3.0 protocol (check details in page 10), then start following steps

1. Open Alexa App
2. Click “More” on the bottom of right corner
3. Click “Skills & Games”
4. Click “ ” on the top of right corner
5. Type into “Smart life” and search
6. Click “Smart life” skill, follow instruction to finish configuration and start voice control

Google Home voice control instruction

Please add device into MiBoxer Zigbee 3.0 gateway (check details in page 10) and start following steps

1. Open Google Home App
2. Click “+” on the top of left corner
3. Click “Set up device”
4. Click “Works with Google”
5. Click “ ” on the top of right corner
6. Type into “Smart life” and search
7. Click “Smart life” skill, follow instruction to finish configuration and start voice control

Attention

1. Please turn off power supply before installation.
2. Please ensure input voltage to be same as requirements from device.
3. Don’t disassemble device if you are not expert, otherwise it will damage it.
4. Please do not use the light in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>