CEBORA 330 TS Impact Multifunction Welding System User Guide
- June 1, 2024
- Cebora
Table of Contents
CEBORA 330 TS Impact Multifunction Welding System
SYNSTAR 330 TC, art 386
Compact device including transport trolley, earth cable 50 sqm/3.5 m with
clamp, 4-roller wire feed, roller Ø 30mm for 0.6/0.8 & 1.0/1.2 mm for steel
wire!!! 15-330 amps, duty cycle 60% at 300 amps. (without hose package &
pressure regulator)
APPLY NOW FOR UP TO 24 MONTHS’ WARRANTY!
- Simply register at
- https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no.0.
- Article Number: 14704
- EAN Code: 9004853147043
TECHNICAL FACTS
SYNSTAR 330 TC & 330 TS SYNERGIC
The new SYNSTAR 330 TC and TS are three-phase multi-process power sources with
inverter technology for MIG, TIG and MMA welding including a 4-roll wire
feeder from Cebora (Ø 30mm). The SYNSTAR models offer functions including dual
value circuit (MIG Short process) and pulse and double pulse operation, as
well as more than 70 welding programs for wire diameters 0.8/0.9/1.0/1.2mm.
Synergetic programs for pulse welding of stainless steel are also provided,
which are optimized for thin metal sheets. The TC model is available as a
compact unit and the TS version as a 2-part unit.
Two different types of hose packages can be used with this power source:
- The air-cooled orig. BINZEL hose package MB EVO 36
- The water-cooled orig. BINZEL hose package MB EVO 501
LCD TOUCH display
The LCD TOUCH display allows a fast and intuitive selection of process, wire type, gas type, current, thickness, voltage and wire feed speed. The power source offers numerous functions that can be set on the TOUCH display, such as arc length, short arc or pulse welding, 2-stroke or 4-stroke operation, spot welding time, pause time, throttle effect, push-pull force, burn back, soft start, gas pre-flow and gas post-flow. If required, it is also possible to equip it with a cooling unit (art. 1681). This particularly versatile power source is suitable for numerous applications, especially in medium-sized steel structures, and is characterised by its low current consumption (PFC). Complies with the EN 61000-3-12 standard.
Standard configuration
- SYNSTAR 330 TC
- Earth terminal with 3.5 m earth cable 50 mm²
- Welding cable plug, Ø 13 mm, 35/50/70 mm²
- Feed ring Ø 30 mm for welding wire Ø 0.6-0.8 and 1.0-1.2 mm f. Fe/CrNi/CuSi
- Operating instructions / CE
Possible applications
- Mechanical engineering
- Plant construction
- Container construction
- Steel construction
- Metalworking shops
- Forging
- Agriculture
Materials
- Steel
- CrNi
- Aluminium
- MIG brazing
- Cored wire
SPECIFICATIONS
SPECIFICATIONS
Material thickness| 0,8 – 12 mm
steel / stainless steel wire diameter| 0,8 – 1,2 mm
welding voltage adjustment| 14,5 – 30,5 V
aluminium wire diameter| 1,0 – 1,2 mm
welding wire roll diameter| 200 / 300 mm
MIG-soldering diameter| 0,8 – 1,2 mm
welding wire roll weight| 5/15 kg
---|---
duty cycle| 270 A
welding current setting| 15 – 330 A
ground connection plug/cross-section| 13 / 50 O / mm2
wire feed speed| 22 m/min
welding power source (10 min at 40 °C) at welding current| 40 / 330 % / A
Max. power consumption| 12,4 kVA
voltage/phases| 400 / 3 V / ~
Mains frequency| 50 Hz
anti-surge fuse| 16 AT
Degree of protection (IP)| 23 S
feed drive| 4 Rollers
connector| CEE 16 A
Width| 510 mm
Depth| 1022 mm
Height| 960 mm
Weight| 72 kg
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjusting machine tolerances, e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition
- Lathe chuck reassembly with the marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
COMPRESSED AIR TECHNOLOGY WELDING TECHNOLOGY METALWORKING STONE CUTTING TECHNOLOGY WORKSHOP TECHNOLOGY POWER GENERATORS.