Kogan ELSTD1MTMBA Standing Desk Electric Single Motor User Guide

: October 30, 2023
: Kogan

Table of Contents

Kogan ELSTD1MTMBA Standing Desk Electric Single Motor
SAFETY & WARNINGS
COMPONENTS
OVERVIEW
ASSEMBLY
OPERATION
CLEANING & CARE
TROUBLESHOOTING
SPECIFICATIONS
FRAME DIMENSIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kogan ELSTD1MTMBA Standing Desk Electric Single Motor

SAFETY & WARNINGS

Ensure to read all instructions and warnings in this user guide prior to assembly and use. Retain this user guide for future reference.

This appliance can be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the desk in a safe way and understand the hazards involved.
This desk is not a toy. Do not allow children to play with the desk or be around it without constant adult supervision.
Dispose of the plastic packaging materials as they may pose a choking hazard to children.
The operating environment of this desk is 0–40°C.
The maximum load capacity of this desk is 70kg. Do not overload the desk.
Ensure the power cord is unplugged before cleaning.
Be familiarised with all functions and program settings of the desk before first use.
Slight noise caused by the belt or braking system is normal and will not have any effect on the use of the desk.
Do not clean the desk with corrosive or abrasive materials.
If the power cable is damaged, stop use immediately and contact help.Kogan.com for assistance.
Ensure there are no hazards in the operating environment.
Do not leave tools around the environment.
Keep the original packaging if necessary in case of future use in transportation.

This marking indicates that this desk should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

COMPONENTS

Hardware

OVERVIEW

Control box

13 LED display
14 Up button
15 Down button
16 Position 1 button
17 Position 2 button
18 Position 3 button
19 Height memory button
20 Posture timer button

Notes :

Images are used as reference only.
If any components are missing, or if you have difficulty with assembling the desk, contact help.Kogan.com for assistance.

ASSEMBLY

Step 1: Installing the pedestals
Using the 5x5mm Allen key (C2), secure the pedestals (12) to the left and right columns (10, 7) with eight M6 screws (A). These create left and right column assemblies.
Step 2: Installing the supporting beam
Lay the left column assembly horizontal, then align the supporting beam (6) with the left column (10). Using the 5mm Allen key (C2), secure the supporting beam with two M8 screws (B). Using the 5mm Allen key (C2), secure the other end of the supporting beam to the right column (7) with two M8 screws (B). If the length of the supporting beam needs to be adjusted, use the 4mm Allen key (C1) to loosen the screws in the middle of the supporting beam. Stretch the supporting beam to the desired length, then tighten the screws.
Step 3: Installing the transmission rod
Loosen, align, and insert one end of the transmission rod (4) into the left column (10). Using the wrench (G), tighten the transmission rod. Slightly rotate the transmission rod and insert it into the right column (7). Using the 2.5mm Allen key (D), tighten the transmission rod until secure
Note :
Do not rotate the transmission rod by more than 120
Step 4: Installing the supporting plates
Using the 5mm Allen key (C2), secure the supporting plates (5) to the left and right columns (10, 7) with four M6 screws (A). This creates the base assembly.
Step 5: Installing the tabletop and control box
Secure the tabletop (1) to the base assembly with twelve ST4.2 screws (F). The distance between the edges of the tabletop and the supporting plates (5) should be no more than 200mm. Secure the control panel (9) to the tabletop with two ST4.2 screws (F).

Note:

The control box (2) will already be attached to the tabletop

Step 6: Installing the baffle
Using the 2.5mm Allen key (D), secure the baffle (3) with four M4 screws (E).
Step 7: Connecting cables
Connect the control panel (9) and the power cable (8) to the control box (2). Use the cable ties (11) if necessary.

OPERATION

Ensure the desk has been assembled correctly before use.

Powering
Connect the power cable to a power outlet and turn the desk on. Turn the outlet off to turn off the desk.

Adjusting desk height
Press the up or down buttons (▲, ▼) to adjust the height of the desk. The LED display will show the currently set height.

Height memory function
This desk can save up to three heights, allowing ease of use when adjusting to commonly used desk heights. To save a height:

Press the up or down buttons (▲, ▼) to adjust the desk to the desired height.
Press the height memory button (M) to save the height. The LED display will show ‘ ’.
Press any of the position buttons (1, 2, or 3) to map the height to the selected button. In future use, users only need to press the relevant position button to adjust to the saved height.

Posture timer button
Sitting at a desk for continuous periods may lead to a slouched posture. This desk features an alarm that can be set to ring after a specified period to remind users to correct their posture. To set the timer:

Press the posture timer button (A) and the LED display will show ‘ ’.
Wait for two seconds, then press the up or down buttons (▲, ▼) to adjust the time set on the timer. The default time is 45 minutes, and this will be shown on the LED display as ‘45’. Any adjustments made to the time set will be reflected on the LED display.
Once the desired time is selected, either press any button on the control box or wait for five seconds to save the set time.

When the timer elapses, the LED display will show ‘00’ and the desk will emit a beeping tone for ten seconds. Within those ten seconds, press any button on the control box to reset the timer. Alternatively, press and hold the posture timer button
(A) for three seconds to turn off the timer. The LED display will show ‘ ’.
If no button is pressed within the ten-second period, the timer will emit another beep after another five minutes. If no button is pressed when beeping, the timer will turn off.

CLEANING & CARE

Ensure the desk is turned off and the power cable is unplugged before cleaning. Wipe the dust on the surface with a damp cloth.

Notes:

Do not allow water to drop into the internals or allow it to loosen connections.
Do not clean the desk with corrosive or abrasive materials.

TROUBLESHOOTING

Problem	Solution

The desk is not responding when pressing the up or down buttons whilst powered.|

· Ensure all cables are connected well.

· If the problem persists, contact help.Kogan.com for assistance.

When adjusting, the desk is rising at a low speed.| · Ensure the desk is not loading more than 70kg.

· If the problem persists, contact help.Kogan.com for assistance.

The motor is not moving as instructed.|

Stop use and contact help.Kogan.com for assistance.

The desk can be adjusted down but cannot go up.| · Reposition the desk.