S BAGNO UKM3111-12070TDM Bathroom LED Mirror Instruction Manual

S BAGNO UKM3111-12070TDM Bathroom LED Mirror

Product Information

• Specifications
  • Size: N
  • Input: G
  • Power: BARa >80
  • LED: B Lumen
  • CCT: AGNO S’ S’ BAGNO Kits Coming with the Mirror
  • Expansion Tube: 3+1
  • Screw: 3+1
  • Junction Box: 1
• Tools Needed for Installation
  • Pencil
  • Screw Driver
  • Rubber Mallet
  • Electric Drill
  • Tape Measure
• Installation Steps
  • Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
  • Use a hammer to drive the plastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the screws into the plastic anchors.
  • Connect the wall power cord to the wires behind the mirror through the junction box.
  • Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
• Instructions for Use
  • The mirror is equipped with 3 touch-sensor switches. When the installation is finished and the power is connected, the touch sensor light will be on. It can be turned off by long-pressing when the light is off.
  • First touch sensor: One click for light on/off, long press for dimming.
  • Second touch sensor: Turn on the demister pad before having a shower. When you finish the shower, the demister pad area will be clear without any fog. Turn it off before leaving.
  • Third touch sensor: Connect the wall power cord to the wires behind the mirror through the junction box.

FAQs

• Q: How do I turn on/off the light?
  • A: One click on the first touch sensor switch turns the light on/off.
• Q: How do I adjust the brightness of the light?
  • A: Long-press the first touch sensor switch to dim the light.
• Q: What is the purpose of the second touch sensor switch?
  • A: The second touch sensor switch is for turning on/off the demister pad. It prevents fogging on the mirror surface during a shower.
• Q: How do I install the mirror?
  • A: Follow the provided installation steps in the user manual. Make sure to measure and mark the distance on the wall, use plastic anchors for stability, and align the brackets behind the mirror with the screws on the wall.

Technical information

• Size: 120x70cm
• Input: 220V
• Power: 70W
• Ra: >80
• LED: SMD2835/499PCS
• Lumen: 1500LM
• CCT: 6500K

Kits coming with the mirror

Tools needed for installation

Installation steps

1. Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
2. Use a hammer to drive the plastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.
3. Connect the wall power cord to the wires behind the mirror through the junction box.
4. Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.

Instructions for use

• The mirror is equipped with 3 touch sensor switches, when installation is finished and power is connected, the touch sensor light will be on, it can be turned off by a long press when the mirror light is off.

For LED Light

• The first touch sensor is for the LED light, one-click for light on/off, and a long press for dimming.

For Demister Pad

• The second touch sensor is for the demister pad, before having a shower we can turn it on, and when we finish the shower, the demister pad area will be clear without any fog. Turn it off before leaving.

For LED Magnifying Mirror

• The third touch sensor is for lighting up the magnifying mirror, with one click for light on/off.
• The magnifying mirror with light can zoom on your facial features when putting eyeliner, eyelashes, lipstick, and shaving, making sure that every detail of your hair and makeup is appropriate.

Warning

1. Disconnect from the outlet before putting on or taking off parts.
2. Close supervision is necessary when this mirror is used by, or near children.
3. Keep the cord away from heated surfaces.
4. Make sure that the electricity is turned off at the power source before proceeding with the installation.
5. Always unplug all the power supply cords from before moving the product, testing the product, or repairing the product.
6. Do not use outdoors.

MANUFACTURER SPECIALIZED IN: LED wall-mounted vanity mirror, LED full- length mirror, LED mirror cabinet.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>