XPOtool 50743 Fuel Oil and Diesel Pump User Manual

50743 Fuel Oil and Diesel Pump
User Manual

50743 Fuel Oil and Diesel Pump

Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate IN significantly due to continuous further developments.
The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an e-mail to:
service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch
Our postal address is: WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: service@wiltec.info
Phone: +49 2403 55592–0
Fax: (+49 2403 55592–15)

Introduction

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it.  Keep these operation instructions in a safe place.
Safety instructions
CAUTION:
The device is not intended for use by persons (including children) with impaired or limited physical, sensory, and mental abilities or lack of experience and/or real knowledge, unless they are supervised  y a person responsible for their safety or follow the instructions made by this person on how to correctly use the device. Children should be supervised to ensure that they do not play with the device.
ATTENTION:

• Perform a visual inspection of the device before every use. Do not use the device if the safety appliances are damaged or worn out. Never override safety regulations.
• Only use the device accordingly to the intended purpose stated in this manual.
• You are responsible for the safety of the working zone.
• If the cable or the plug is damaged due to external influences, the cable must not be repaired, but must be replaced with a new one. This work can only be carried out by an electrician.
• The voltage of 230 V AC indicated on the nameplate of the device must match the existent mains voltage.
• Never lift, carry, or fix the device by using the power cable.
• Make sure that the electric plug connections are protected from flood and humidity.
• Before working on the device (maintaining, repairing, cleaning it), pull out the plug.
• Avoid exposing the device to rain or direct jets of water.
• The user is responsible for complying with local safety and mounting regulations. Ask an electrician, if necessary.
• The user must take appropriate measures (e.g., installation of an alarm system, a reserve pump, etc.) to prevent damage caused by the flooding in case of device malfunctioning.
• In case of device failure, repairs can only be carried out by an electrician.
• The device must never run dry or be operated with its suction line fully closed. The manufacturer’s warranty is void for damage to the device caused by dry running.

WARNING:
Read all safety precautions and instructions. Failure to obey the safety precautions and instructions might cause an electric shock, a fire, and/or severe injuries. Keep all safety precautions and instructions for future use.
Resistance

• The maximum temperature of the pumped liquid should not exceed +35 ℃ in continuous operation.
• The transport of aggressive fluids (acids, bases, etc.) as well as of abrasive substances (e.g., sand) must be avoided. Water must NOT be pumped either with the device. It is NOT permitted either to pump highly flammable liquids (fuel) with this pump.

Summary
The pump is a small high-efficiently designed diesel pump with a large flow rate and delivery head, operated by the car battery and easy to use. The pump does not only deliver diesel, but also engine oil. However, with this pump, you must not transport petrol or similar liquids. The pump is applicable for small gas stations as well as for private or mobile use.

Properties

• High flow rate, strong suction
• Quickly and easily to operate by car battery
• Reliably and safe

Technical specifications

Item number| Intake voltage
(V)| Power consumption
(W)| Max. flowrates (ℓ⁄min)| Max. lifting
height (m)| Max. suction
height (m)| Threaded connection
(㎜)
---|---|---|---|---|---|---
50743| 12| 150| 40| 10| 2| 26 (¾″)
50744| 24| 150| 40| 10| 2| 26 (¾″)
50768| 12| 160| 40| 10| 2| 26 (¾″)
50769| 12| 160| 40| 10| 2| 26 (¾″)
50959| 12| 150| 40| 10| 2| 26 (¾″)
51563| 12| 180| 40| 12| 2| 26 (¾″)
62134| 12| 375| 60| 12| 3| 26 (¾″), 32.89 (1″)
62136| 12| 550| 80| 15| 3| 26 (¾″), 32.89 (1″)

Use
The diesel pump series has been thoroughly tested with regard to its temperature resistance and complies with the requirements of protection class IP55. Having a built-in protection valve, it can be used without hesitation for machinery and vehicles in the open to simplify the refuelling.
Notes

1. Before connecting the power cord, check the power supply to avoid damages to the vehicle or battery.
2. There must be an input voltage of 12 V DC ±5 %.
3. It is recommended to pre-fill a small amount of the liquid to be delivered before the pump is used for the first time. Connect the hoses according to the arrows on the pump.
4. Make sure that all connections are well sealed and that no air can be sucked in. To ensure that the pumped medium is not contaminated, use the supplied filter.
5. The pump must not be operated any longer than 20 min at a time.

Cleaning
The pump may only be cleaned using mild cleaning agents as well as a damp cloth and soapy water. Damage caused by inappropriate cleaning agents is not covered by warranty.
Maintenance hints

• The machine is largely maintenance-free. However, for a long working life and continuous operation,we recommend regular checking and proper care.
  Attention! Before  very maintenance work, the pump must be switched off. Pull out the plug from the power socket.

• After long non-operation periods, check if a proper turning of the  rotor takes place.

Malfunctions of the pump

Engine does not run

clean the pump.
Engine does not run| Consult a professional electrician.

Pump does not suck in

medium.
Pump room without pump medium| Fill in pump medium in suction nozzle.
Air in suction line| Check if suction line is well sealed.
Suction valve leaking| Clean suction valve.
Suction strainer (suction valve) blocked| Clean suction strainer.
Max. suction lift exceeded| Check suction lift.

Insufficient flow rate

inside the medium.
Pump capacity reduced because of harmful substances| Clean pump and replace worn parts.

Thermo switch switches off pump

clean pump, prevent sucking-in of foreign particles (filter).

Attention!
The pump must not run dry.

Regulations for waste disposal

The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU was implemented in the German law related to electrical and electronic equipment and appliances. All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed out wheeled rubbish bin.
This symbol indicates that this electric device must not be disposed of with the domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR (Stiftung ElektroAltgeräte Register) under the WEEE-registration number DE45283704.
Disposal of used electrical and electronic devices (intended for use in the countries of the European Union and other European countries with a separate waste collection system for these devices). The symbol on the packaging or the product itself indicates that this product must not be treated as normal domestic waste but must be disposed of at a recycling collection station for electrical and electronic waste. By disposing of this product correctly, you contribute to the protection of the environment and the health of your fellow people. Inappropriate disposal threatens the environment and health.

Material recycling helps to reduce the consumption of raw materials.
Additional information about the recycling of this product can be provided by your local commune, the municipal waste disposal facilities, or the store where you purchased the product.
Address: WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
52249 Eschweiler Germany
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
52249 Eschweiler Germany

https://www.XPOtool.com
The Tool Experts
Item 50743, 50744, 50768, 50769, 50959, 51563, 62134, 62136

References

• WilTec - Ihr Online Shop für Haus, Garten, Werkstatt, Freizeit

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>