Vakiav VKG1 Smart Bird Feeder User Manual

Vakiav VKG1 Smart Bird Feeder

Product Information

The Smart Bird Feeder is a technologically advanced device designed to enhance your bird-watching experience. With features such as power control, recovery mode, and user-friendly operation, this smart feeder is perfect for bird enthusiasts of all levels.

Specifications

• Model : Smart Bird Feeder
• Power : Switch control
• Special Feature : Recovery mode
• Technology: Innovative design

Product Usage Instructions

Power On/Off

1. Flip the switch up to turn on the power.
2. Flip the switch down to turn off the power.

Recovery Mode

To activate recovery mode, depress the Recover button. This feature helps in restoring settings or recovering from any issues.

Control Pin

The control pin allows you to easily manage the functions of the Smart Bird Feeder. Use it in conjunction with the power switch for seamless operation.

FAQ

• Q: How do I know when the battery needs to be replaced?
• A : The Smart Bird Feeder is designed to provide low-battery notifications either through visual indicators or alerts on the device itself. Make sure to keep an eye out for these signals to know when it’s time for a battery change.
• Q: Can I use the Smart Bird Feeder in all weather conditions?
• A: While the Smart Bird Feeder is weather-resistant, it is recommended to avoid extreme weather conditions such as heavy rain or snow to ensure the longevity of the device.

SPECIFICATIONS

What’s in the box?

1. .Main Part
2. .Roof
3. Monitor
4. Tray
5. Key Ring
6. Base
7. Holder
8. Tie
9. Charging Cable
10. Hex Wrench
11. Hexagon Socket Head
12. Cap Screw M4*6 XS
13. PWB Screw 4*20 X3
14. User Manual
15. Q&ACard
16. Control pin

Button Instruction

Note

1. Flip the switch up to turn on the power.
2. Flip the switch down to turn off the power.
3. Depress the Recover button to recover mode

Connect the Vakiav

Note: Fully charge the device before use

1. After being connected to the charging cable, the device will auto-power on and enter the pairing state. At this time, you can hear the bird call
2. Download Vakiav APP
3. Open the Vakiav APP and add the device.
4. The connection succeeds.

Position the Vakiav

caution

• Please avoid covering the Illustrated area to achieve normal range during operation

Status Check

Check the WI Fl signal strength on the Vakiav APP

Check the battery level on the Vakiav APP.

Caution: If the battery Is low, charge It ln time

Installation

1. Install the feeder base
2. Place the tray
3. Install the feeder roof
4. Place the monitoring box
5. Add the birdseed
6. Fix the holder through screws or ties
7. Put in the bird viewer Vakiav

How to Add Bird Seed and Wash the Tray

FCC STATEMENT

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference and
2. this device must accept any interference received, including interference that may cause undesired operation;

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications  However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures;
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced for help. Pursuant to section 15.21 of the FCC rules, changes or modifications to a product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device meets the FCC radio Frequency Emission Guidelines, Information on the product is on file with the FCC and can be found by inputting such product FCC ID(which can be found on the device)into the FCC ID Search form available at https://www.fcc.gov/oet/ea/fccid

The party responsible for FCC compliance Is:
VAN IMAGE CO LTD 92 CORPORATE PARK STEC 204 IRVINE, CA 92606

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement

CONTACT

• Facebook.comNakiav
• Instagram.comNakiav
• Twitter.comNakiav

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>