Flysocks 12H Alarm Clock Bedside Instructions

Flysocks 12H Alarm Clock Bedside

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• For indoor use only.
• This product should not be exposed to direct sunlight.
• Please contact seller for replacement if there is any damage caused by transportation.

Package Contents

LED and Button Rules

1. Time

2. PM Indicator
   Off: when it’s in 24H mode or AM in 12H mode.
   On: when it ‘s PM in 12H mode.

3. Alarm Indicator
   Off: All alarms disabled.
   On: At least one alarm enabled.

4. Relative Humidity

5. Temperature

6. SET
   Short press to set Time/Alarm. Long press 3s to set LED brightness, long press 3s again to exit.

7. UP
   Set Celsius/ Farenhight display.

8. DOWN
   Short press to set sound control function. Long press 3s to enable or disable alarm function.

9. RESET

10. DC
    3.5″1.35mm

How to Use

Set Time/Alarm

1. Press “SET” button to get into setting mode and then follow the instruction in picture below.
2. Use ” UP” or “DOWN” button to adjust parameters in every step.
3. Setting mode will exit after 10s if you do NOT press any button.
4. Press any button to stop the ring when clock alarms.
5. Every alarm will ring for 1 min then stop automatically.
6. If you do NOT want to set any alarm or all alarms at once, just press ” SET” button to go to next steps or leave it there till it exits setting mode automatically.

Alarm ON/OFF

To quickly turn on/off alarm function. Press “DOWN” button for 3s to turn on or off all alarm(s) you’ve set. The alarm indicator will on when alarm function is enabled and off while alarm function is disabled. Th is is an alarm function shortcut . Alarm setting details are available at Set Time/Alarm section. If you want to turn on or off a certain alarm instead of all alarms, please refer to Set Time/Alarm section.

Set LED Brightness

The default LED will automatically be L1 during 18:00-06:59 and L3 during 07:00-17:59. If you choose a preferred brightness level during 07:00-17:59, the clock will remember it. If you choose a preferred brightness level during 18:00-06:59, the clock will remember it. Day time brightness and night time brightness are individual for you to set separately.

Set Celsius/Farenhight Display

Set Sound Control Function

Sound control ON
The LED screen will be OFF in 10s. You can turn it ON by tapping the clock or making an audible sound (such as clap) .

Sound control OFF
The LED screen will always be ON.

FAQ

1. How does my alarm clock keep the time accurate even when power is off?

The alarm clock has a CR2032 button battery built in to keep the internal time running even when the power is off. When the button battery is used up, please follow below figure for the rep lacement.

2. Why I need to tap the clock forcefully to awake the LED?

In order to awake the LED easily, we recommend you to tap t he top of the clock slightly with your fingernails. Tapping t he clock with fingernails will make it much easier to awake the LED and it only requires a slight tap.

Warranty

Meross products are covered by a 24 months limited warranty from the date of its original purchase. If any problems occur, please contact [email protected] for help.

We can only provide after sales service for products that are sold by Meross or Meross authorized retailers and distributors.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>