kogan KAWLMFX75MA Low Profile Fixed TV Wall Mount User Guide
- October 30, 2023
- Kogan
Table of Contents
kogan KAWLMFX75MA Low Profile Fixed TV Wall Mount
SAFETY & WARNINGS
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Never exceed the maximum load capacity of 45kg or it may result in product failure or personal injury.
IMPORTANT: Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular
intervals (at least every three months).
COMPONENTS
- Tools required for installation (not supplied).
INSTALLING MOUNT TO WALL
Step 1
Using a pencil and spirit level, mark the desired position for the mount on
your wall, using the wall mount to serve as a stencil for the hole positions.
If mounting on drywall or plasterboard, use a stud finder first to check the
positions of wall studs and ensure the position is free from electrical
wiring. Using a drill, create the pilot holes.
Drywall/plaster: Use a ø4.5mm or 3/16” drill bit, drilling 55mm deep.
Masonry/concrete: Use a ø10mm or 3/8” drill bit, drilling 60mm deep.
- Pencil, spirit level, stud finder, and drill not supplied.
Step 2
Drywall/plaster: Position the wall mount in line with the pilot holes and
secure to the wall using washers (W-C) and ST6.3 screws (W-A). Do not use the
wall anchors.
Masonry/concrete: Insert wall anchors (W-B) into the drilled holes.
Position the wall mount in line with the holes and secure it to the wall using
washers (W-C) and ST6.3 screws (W-A).
- When using a spirit level, ensure the bubble is centered as per the image shown here.
INSTALLING BRACKET TO TV
- Align the brackets with your TV’s VESA holes and secure using supplied screws and washers depending on the required length.
- Check if washers (M-E, M-F) are required to ensure the correct length of the screw, as per the below image. Failure to follow this step may result in damage to your TV or wall mount.
SECURING TV TO MOUNT
- Hook the TV with brackets installed onto the wall mount. Two people should carry the TV to prevent damage.
- Once in place, tighten the bracket screws using a Phillips head screwdriver.
Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.