tala Brass, Graphite and Knuckle Pendant Installation Guide
- June 3, 2024
- TALA
Table of Contents
Installation Guide
BRASS, GRAPHITE & KNUCKLE PENDANT
Brass, Graphite and Knuckle Pendant
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk
BEFORE STARTING
We advise the fitting of our ceiling rose and pendant to be performed by a qualified electrician. Please read through these instructions before commencing work, and keepthem for future reference. Please take extreme care when carrying out these instructions.
IMPORTANT
This light fitting must be connected to the supply earth. If your lighting circuit does not have an earth, ask a qualified electrician to provide an earth facility. This light fitting is suitable for indoor use only. This fitting operates on 120V mains voltage. Please visit our website to see our recommended dimmers.
WARNING
Always switch off electricity supply at the mains during installation and maintenance. We recommend that the fuse is withdrawn or the circuit breaker is switched off whilst work is in progress. Do not just turn off at the wall switch. All fittings must be installed in accordance with current NFPA 70, National Electrical Code (NEC).
RECOMMENDED EQUIPMENT
- Screwdriver
- Wire strippers
- Insulation tape
Further equipment may be required for fixing to your ceiling
Scan me for more technical help
https://qrco.de/bcPJMT
FOR INDOOR USE ONLY
SKU – OAK-KP-02-US SKU – WALT-KP-02-US
SKU – BRAS-PD-02-US SKU – GRAP-PD-01-US
Pendant Components
A x1 Ceiling Rose with Cable
B x1 Pendant (Graphite, Brass, Walnut or Oak)
C x1 Ceiling Bracket
D x2 Bolts M4
E x1 Grub/Set Screw
F Screws and Rawl plugs
STEP 1
Attach component C to your ceiling using screws and plug.
Always choose screws and plugs that are appropriate for the ceiling
type.
STEP 2
Adjust the cord to your desired length. Using a flat head screw driver,
tighten ‘grub/set screw E’ .This will secure the cable in place. Maintain all
double insulation.
STEP 3
First identify your household wiring using NFPA 70, National Electrical Code
(NEC). Attach the pendant wiring to your household supply as shown. Use an
appropriate junction box.
STEP 4
Fasten the Ceiling Rose A onto the Ceiling Bracket Cusing the bolts provided .
WARRANTY AND AFTER-CARE
This product has a two-year warranty. If there appears to be a functional
defect with the product during this time, please contact our team at
customerservice@tala.co.uk.
Please note, the flexible cable attached to this luminaire cannot be replaced;
if the cable is damaged, recycle the luminaire and seek a replacement.
Join the Community
hello@tala.co.uk |
Instagram:@tala |
Facebook: talaHQ |
Pinterest: TalaLED |
Tag: lighttoliveby
Tala Energy Ltd. 25B Vyner Street, London, E2 9DG
Tala North America, Inc.
2 Research Place, Suite 300, Rockville, MD 20850
Documents / Resources
| tala
Brass, Graphite and Knuckle
Pendant
[pdf] Installation Guide
Brass Graphite and Knuckle Pendant, Brass and Knuckle Pendant, Graphite and
Knuckle Pendant, Knuckle Pendant, Pendant, OAK-KP-02-US, WALT-KP-02-US, BRAS-
PD-02-US, GRAP-PD-01-US
---|---
| tala
Brass Graphite and Knuckle
Pendant
[pdf] Installation Guide
Brass Graphite and Knuckle Pendant, Graphite and Knuckle Pendant, Knuckle
Pendant, Pendant
References
- Tala | Shop Official Tala® Lighting | Light to Live By
- Tala | Shop Official Tala® Lighting | Light to Live By – Tala US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>