mint AXENT TS026-3 Mini One Intelligent Toilet Installation Guide
- July 13, 2024
- mint AXENT
Table of Contents
mint AXENT TS026-3 Mini One Intelligent Toilet
Specifications
- Design: TS026-3
- Material: 120g A4
- Size: 292 mm x 210 mm
- Scale: 1:2
- Unit: mm
- Part No.: 224000167900
Product Usage Instructions
-
Safety Instructions
Installation and repairs should be done by qualified professionals. Do not remove components from the intelligent toilet yourself. Ensure proper grounding and use a GFCI outlet. If there is damage to the cord or plug, seek professional repair. -
Condensation Prevention
If condensation forms when transitioning the toilet from a cold to warm location, leave it switched off for a few hours before use. -
Parts Included
The standard delivery includes the main body, filter, dry massage, flush, remote control, battery, remote control holder installation template, bowl mounting hardware, and more as listed.
Installation Steps
- Verify dimensions before starting installation.
- Recommended operating pressure is 20 – 108 psi.
- Run water until clear before installation.
- Press the reset button before installing.
- Check for leaks before caulking.
- For any technical support, contact the dealer or Axent support.
FAQ
-
Q: Can I reuse old hoses for installation?
A: No, old hoses should not be reused. Please use new hoses and included components to avoid damage. -
Q: What should I do if there is a damaged cord or plug?
A: Return the product to a service center for repair. The cord or plug should only be changed by qualified personnel. -
Q: How can I prevent condensation on the toilet?
A: Leave the unit switched off for a few hours when transitioning from a cold to warm location.
MINT ONE
SAFETY SYMBOLS
The following warning signs warn you of dangerous situations and their severity:
- DANGER! High Risk, Lethal Hazards, Severe Injuries
- WARNING! Medium Risk, Severe Injuries
- CAUTION! Low Risk, Minor Injuries
- NOTE! Damage to Property
TARGET READERSHIP AND INSTALLER QUALIFICATIONS
Installation must be carried out by qualified professionals.
Repairs should only be performed by trained and qualified persons.
NOTE!
- Follow all local installation regulations and country specific voltage and plumbing standards. DO NOT install the intelligent toilet in rooms where there is a danger of frost. The room temperature and water temperature must not be less than 4°C ( 39 °F ).
- Condensation may form when the intelligent toilet is brought from a cold location to a warm one. Leave the unit switched off for a few hours before operating.
DANGER!
Risk of fatal electric shock
- The appliance must be grounded and plugged into a GFCI outlet.
- DO NOT remove individual components from (inside of) the intelligent toilet.
- If the unit has a damaged cord or plug, return the product to a service center for repair. The cord or plug may only be changed by qualified personnel.
CAUTION!
- DO NOT reuse old hoses. Please use new hoses and included components.
- Axent Corp is not liable or responsible for damaged caused by 3rd party components
TECHNICAL SUPPORT
- For any questions or any assistance with this product, please contact your dealer or call us at 1-800-769-4857
- support@axentproducts.com
- www.axentbath.us
SCOPE OF DELIVERY
Standard delivery contents
The below parts are not included
with the toilet.
INSTALLATION
Place serial number sticker here for reference
- AXENT Intelligence Inc.
- www.axentbath.us
- support@axentproducts.com
- 1-800-769-4857