Kogan KASTDGLSBLA TV Stand Mount User Guide
- October 30, 2023
- Kogan
Table of Contents
Kogan KASTDGLSBLA TV Stand Mount
The KOGAN TV Stand Mount with Shelf (KASTDGLSBLA) is a product designed to mount your TV on a stand with a shelf for additional storage. It comes with all the necessary components and hardware required for installation. Before installation, it is important to read the entire instruction manual to ensure proper assembly.
Product Safety & Warnings
It is important to use the product as per the rated weight capacity to avoid instability and possible injury. Ensure that youhave received all parts according to the component checklist before installation. Regular maintenance checks (at least every three months) are recommended to ensure the product is secure and safe to use.
Product Components
-
* A Base (x1)- B Lower stand (x1)
- C Upper stand (x1)
- D Shelf (x1)
- E Wall plate (x1)
- F Brackets (x2)
- G Fastener (x2)
- H Feet (x8)
- I (x3)
- J (x4)
- K (x3)
- L (x7)
- M (x4)
- N (x2)
- O (x1)
- M-A M5x14 (x4)
- M-B M6x14 (x4)
- M-C M6x30 (x4)
- M-D M8x30 (x4)
- M-E M8x50 (x4)
- M-F (x4)
- M-G (x8)
Phillips head screwdriver and additional spacers (M-H x8) are required for installation and are not supplied with the product.
Product Mount Assembly
- Attach feet (H) to the bottom of the base (A).
- Secure the lower stand (B) to the base (A) using x3 I screws,along with x3 K and L washers.
- Insert upper stand (C) into the lower stand (B) and secure with the x4 J screws.
- Attach the wall plate (E) to the upper stand (C) using the M screws and remaining x4 L washers.
- Attach the shelf (D) to the lower stand by inserting the tab of the shelf into the opening in the lower stand and securing it with x2 N screws. Use a Phillips head screwdriver to secure thescrews.
Installing Bracket to TV
Align the bracket with your TV’s VESA holes and secure it using supplied
screws and square spacers (M-F) depending on required length. Use a Phillips
head screwdriver to secure the screws. Check if additional spacers (M-G, M-H)
are required to ensure the correct
length of screw as per the image in the manual. Failure to follow this step
may result in damage to your TV or wall mount.
Securing TV to Mount
Hook the TV with brackets installed onto the wall mount at the desired height.
Two people should carry the TV to prevent damage. Once in place, attach and
tighten the fasteners (G) using a Phillips head screwdriver. Use the openings
in the stand assembly
for cable management.
Need More Information?
If you need further assistance with installation or have any questions regarding the product, head online to help.kogan.com for the most up-to-date guide and additional assistance.
SAFETY & WARNINGS
Read the entire instruction manual before you start installation and assembly.
If you have any questions regarding any of the instructions or warnings,
contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may
result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Never exceed the maximum load capacities of 40kg (for the mount) and 5kg (for the shelf) or it may result in product failure or personal injury.
IMPORTANT: Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular
intervals (at least every three months).
COMPONENTS
Required for installation (not supplied)
MOUNT ASSEMBLY
Step 1
Attach feet (H) to bottom of base (A).
Step 2
Using the Allen key (O), secure the lower stand (B) to the base (A) using x3 I
screws, along with x3 K and L washers.
Step 3
Insert upper stand (C) into the lower stand (B) and secure with the x4 J
screws.
Step 4
Attach the wall plate (E) to the upper stand (C) using the M screws and
remaining x4 L washers.
Step 5
Attach the shelf (D) to the lower stand, first by inserting the tab of the
shelf into the opening in the lower stand (refer to figure 1 below), then
securing with x2 N screws (figure 2). Use a Phillips head screwdriver (not
supplied) to secure the screws.
INSTALLING BRACKET TO TV
Align the bracket with your TV’s VESA holes and secure using supplied screws
and square spacers (M-F) depending on required length. Use a Phillips head
screwdriver (not supplied) to secure the screws.
Check if additional spacers (M-G, M-H) are required to ensure correct length
of screw, as per the below image. Failure to follow this step may result in
damage to your TV or wall mount. 
SECURING TV TO MOUNT
Hook the TV with brackets installed onto the wall mount at the desired height.
Two people should carry the TV to prevent damage.
Once in place, attach and tighten the fasteners (G) using a Phillips head
screwdriver. 
Use the openings in the stand assembly for cable management. 
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com
kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>