kogan KAMN34F14QUVA 34 Inch Curved Ultrawide FreeSync Gaming Monitor User Guide

kogan KAMN34F14QUVA 34 Inch Curved Ultrawide FreeSync Gaming Monitor

Product Information

Specifications:

• Model: KAMN34F14QUVA
• Screen Size: 34 inches
• Resolution: 3440 x 1440 (WQHD)
• Refresh Rate: 165Hz
• Aspect Ratio: Curved Ultrawide
• Sync Technology: FreeSync

Product Usage Instructions

Assembly:

1. Gently lay the monitor on a cloth with the screen facing down.
2. Align the stand base with the stand stem and clip them together.
3. Attach the assembled stand to the rear of the monitor.

VESA Mount:

1. Lay the monitor with the display side facing down on a soft cloth.
2. Identify the four wall mounting screws on the back of the monitor.
3. Mount the monitor using a VESA mount (not included) following the provided instructions.

Operation:

1. Connect the monitor to your computer via HDMI/DP.
2. Connect the power cable to the monitor and plug it into an outlet.
3. Turn on the outlet and press the power button on the monitor to turn it on.

On-Screen Display (OSD) Menu:
The OSD menu allows adjustments to various settings. Follow these steps:

1. Press the menu/select button to access the OSD menu.
2. Browse through settings using the up and down buttons.
3. Enter sub-menus and adjust settings as needed.
4. Confirm adjustments by pressing the menu/select button.
5. Exit the OSD menu using the exit/input menu button.

OSD Menu Settings:
List of available settings that can be adjusted through the OSD menu:

• Main Menu: Input Source, Brightness/Contrast, Colour Setting, Picture Quality Setting, Display Audio
• Sub-Menu: DP1, DP2, HDMI1, HDMI2, Brightness, Contrast, DCR, Gamma, Picture Mode, Colour Temp, Hue, Saturation, Low Blue Light, Sharpness, Response Time, Super Resolution, Black Level, Owl Sight, Image Ratio, Mute Volume Options

Frequently Asked Questions (FAQ):

• Q: What should I do if any items are missing from the monitor set?
  A: Contact help.Kogan.com for support to address missing items.

• Q: Can I mount this monitor on a wall?
  A: Yes, you can mount it using a VESA mount. Ensure to follow the VESA mount instructions provided.

SAFETY & WARNINGS

Ensure to read all instructions and warnings in this user guide before first use. Retain this user guide for future reference.

• This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
• Avoid placing the monitor near heaters, stoves, fireplaces, or other heat sources.
• Do not place this monitor in rooms lacking adequate ventilation.
• Do not insert any objects or spray any liquids into the vents.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and cause injury to people within its vicinity.
• Do not place heavy objects on the monitor, its power cord, or any connected cables.
• Do not open the back panel of the monitor as it contains a high-voltage current even when not plugged in.
• Unplug the monitor if it will not be used for an extended period.
• Ensure the monitor is unplugged before cleaning.

The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

COMPONENTS

Check if all items are included in your monitor set, if there are missing items; contact help.Kogan.com for support.

OVERVIEW

• Standby Power Off/On
• E-Exit/Input Menu
• Up/Brightness
• Down/Volume
• M-Menu/Select

Button Function

1. Press the menu key to display OSD and select.
2. Press the E key display source (HDMI/DP optional).
3. Press down the key volume; Press up the key brightness.

ASSEMBLY

1. Gently lay the monitor on the cloth with the screen facing down.
2. Align the stand base with the stand stem, then clip the stand base into the stand stem.
3. Attach the assembled stand to the rear of the monitor.

Adjusting the angle of the monitor

1. The screen can be tilted forward up to 5° or backward up to 15°.
2. To adjust the angle, hold the edges of the screen with both hands and tilt.

Note: Do not directly touch the screen when tilting.

VESA MOUNT

If mounting to a wall, ensure the stand base and stand stem are disconnected from the monitor.

1. With the display side facing down, lay the monitor on a soft cloth to prevent damage.
2. Identify the four wall mounting screws on the back of the monitor.
3. Mount the monitor as desired with the steps provided with your VESA mount.

Notes:

• Ensure there is at least a 10cm clearance away from all sides of the monitor.
• The mounting hole distance for this monitor is 75mm x 75mm.
• VESA mount and mounting accessories are not included.
• Images are for reference only.

OPERATION

1. Connect the monitor to your computer via HDMI/DP.

2. Connect one end of the power cable to the power port of the monitor. Connect the other end to an outlet, then turn the outlet on.
   Note:
   It is recommended that a surge protector with adequate voltage be used if the monitor cannot be directly connected to an outlet.

3. Press the power button to turn the monitor on.

On-Screen display (OSD) menu
The OSD menu allows adjustments to various settings for the monitor.

1. Press the menu/select button to access the OSD menu.
2. Press the up and down buttons to browse through the categories of settings. Press the menu/select button to enter the sub-menu.
3. Press the up and down buttons to browse through the sub-menu. Press the menu/select button to enter the adjustment settings of the desired setting.
4. Press the up and down buttons to adjust the desired setting. Press the menu/select button to confirm the adjustment.
5. Press the exit/input menu button to exit the OSD menu.

OSD menu settings
Below is a list of the settings available that can be adjusted through the OSD menu.

Input Source

| DP1|  |

Select the input signal source

DP2|
HDMI1|
HDMI2|

Brightness/ Contrast

| Brightness| 0-100| Adjust display brightness
Contrast| 0-100| Adjust display Contrast
DCR| Off/On| Turn the DCR function off/on

Colour Setting

| Gamma| Off/1.8/2.0/2.2/2.4| Off/1.8/2.0/2.2/2.4

Picture Mode

| Standard/Game Movie/Reading/ RTS/FPS|

Select the Picture Mode

Colour Temp

| Normal/Warm/Cool| Setting color temperature
User| Red/Green/Blue
Hue| 0-100| Adjust display hue
Saturation| 0-100| Adjust display saturation
Low Blue Light| Off/Weak/ Medium/Strong| Adjust display low Blue

Picture Quality Setting

| Sharpness| 0-100| Adjust display sharpness
Response Time| Off/Weak/ Medium/Strong| Set response time
Super Resolution| Off/Weak/ Medium/Strong| Adjust the Super Resolution of the monitor
Black Level| 0-100| Adjust the display Black level
Owl Sight| Off/Weak/ Medium/Strong| Turn Owl Sight off/on
Display| Image Ratio| Auto/16:9/4:3/21:9| Set aspect ration

Audio

| Mute| On/Off| Turn the Mute function off/on
Volume| 0-100| Adjust audio volume

Multi-Window

|

Multi-Window

| Off|

Select the window mode of the monitor

---|---|---|---
PIP Mode
PBP Mode

Sub Win2 Input

| DP1|

Select the sub-windows input source

DP2
HDMI1
HDMI2

PIP Size

| Small|

Setting the PIP size

Medium
Large

PIP Position

| Top Right|

Setting the PIP position

Top Left
Bottom Right
Bottom Left

Sound Source

| Window1| Select the Sound Source of the monitor
Window2
Swap| /| Swap the PIP window

OSD

|

Language

| English/François Español/Deutsch Italiano| Setting the OSD language
H Position| 0-100| Adjust the horizontal position
V Position| 0-100| Adjust the vertical position
Transparency| 0-100| Adjust the OSD transparency value
Time Out| 10-60| Set how long the OSD remains
OSD Rotation| Normal/90/180/270| Adjust the OSD Rotation

Other

| Adaptive Sync| On/Off|
HDR| On/Off|
MPRT| Off/Weak/ Medium/Strong|
Cross| Off/Mode1/Mode2

/Mode3/Mode4

|
Reset| /| Restore to factory settings

FreeSync

• To use this feature, ensure your hardware has FreeSync capabilities and that the graphics drivers are fully up to date.
• After connecting the monitor, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in the graphics card menu.
• Check your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.

Note:
The feature is enabled by default when set to a 165Hz refresh rate.

Input menu shortcut
To quickly change the input source between HDMI and DP:

1. Press the exit/input menu button to access the input menu.
2. Press the up and down buttons to highlight the desired input source, then press the menu/select button to confirm.

Brightness shortcut
When outside the OSD menu, press the up and down buttons to adjust the brightness.

ECO modes
There are various pre-set color modes suited for various use cases available on this monitor. These can be accessed using the ECO modes menu. The modes include the following:

• Standard (suitable for most activities)
• Movie (best suited when watching movies)
• RTS (best suited when playing real-time strategy games)
• FPS (best suited when playing first-person shooter games)
• Game (best suited for general gaming)
• Text (best suited when reading text)

CONNECTIVITY

Note: Before connecting, ensure the display is switched off.

Power cable
Connect one end of the power cable to the power port on the monitor. Connect the other end to a power socket.

HDMI

• For the monitor to receive HDMI signals to your computer, plug one end of the included HDMI cable into the HDMI port on the monitor.
• Plug the other end into the HDMI port on your computer.

Audio port (3.5mm)

• To receive audio signals to your computer, plug your earphones, headphones, or other audio device (not included) into the 3.5mm audio port on the monitor.
• If any audio device is connected to the computer at the same time, it will not produce sound.

DisplayPort (DP)

• Connect the supplied DP cable to the DP IN port at the back of the monitor.
• Plug the other end into the DP port on your computer.

SPECIFICATIONS

Audio
Audio out| Yes
Speakers| Yes
Accessories
Power cable| Yes
DP cable| Yes
Additional functions
Low blue light| Yes
Flicker-free| Yes
Physical dimensions
Dimensions (with stand)| 807.8 x 190.4 x 434.9mm
Dimensions (without stand)| 807.8 x 117.7 x 361.8mm
Net weight| 5.30kg
Gross weight| 7.80 kg

CLEANING & CARE

Ensure the monitor is turned off and unplugged before cleaning.

• Wipe the body with a slightly damp, clean cloth.
• Wipe the screen with a dry microfibre cloth.

Note:
Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners.

Need more information?

• We hope that this user guide has given you the assistance needed for a simple set-up.
• For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>