kogan NBFCCARSTNA RC Monster Stunt Car with Remote Control User Guide

: August 9, 2024
: Kogan

Table of Contents

SAFETY & WARNINGS
OVERVIEW
OPERATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RC MONSTER STUNT CAR
WITH REMOTE CONTROL

SAFETY & WARNINGS

Not suitable for children 6 years old or younger. All electronic devices should be used with caution to prevent electric shock.
Use it under adult supervision.
Do not modify or disassemble the product in any way.
Any modification or disassembly may lead to the abnormal use of the product.
This product contains small parts. Use under adult supervision to prevent children from swallowing small items.

Safe Use of Batteries

Always use under adult supervision.
Ensure the switch is off before installing the battery.
If not in use for a long time, remove the battery from the car and the controller to prevent battery leakage.
Do not dispose of the battery in fire as it may explode or leak.
Avoid using old and new batteries together.
Regularly check the battery for leaks.
If the battery leaks, avoid contact with skin and eyes. In case of skin contact, wash immediately with soap and water. If contact occurs with eyes, rinse with plenty of cold water and seek medical attention immediately.

OVERVIEW

OPERATION

Battery Installation
Controller:

Ensure that the power switch is off.
Release the screws on the rear of the controller.
Open the cover of the battery compartment.
Insert x2 AA batteries into the battery compartment according to the polarity shown inside the controller.
Replace the battery cover back and tighten the screws.

RC car:

Ensure that the power switch is off.
Unscrew the screws.
Open the cover of the battery compartment.
Connect the battery as shown on the right.
Fit the battery cover back and tighten the screws.

Note:
If the product stops operating, remove the battery for 1 minute and then reinstall it. If the fault persists, replace the battery. Batteries should only be installed by adults.
Battery Charging

Plug the USB charger into a USB power adapter or a vacant USB socket in a laptop /computer, and connect the battery plug to the charging cable.
Ensure the positive and negative terminals are correctly aligned.
Charging time is 120 minutes. The red indicator will be on while charging, and it turns off when fully charged.
Regularly inspect product, batteries, charger cable, plugs, and other parts.
Immediately remove the power if the charger exhibits abnormal reactions such as a peculiar smell, noise, or smoke.
Use only the supplied USB cable for charging. Using USB cables from other brands is strictly prohibited.
Do not charge expanded, leaking, or damaged batteries.
Do not overcharge the battery. Remove the charger once the battery is fully charged.
Keep away from flammable objects (carpet, wood floor, solid wood furniture, etc.) while charging.
Do not charge on surfaces that conduct electricity.

Using the RC car

Place the power switch of the controller in the ‘On’ position.
Long press the power button on the RC car. The car and the controller will pair automatically. When it finishes, you can control the car using the controller.
Turn off the car and the controller after use.

Note:
To avoid possible loss of control due to incorrect frequency alignment, always follow these startup steps: turn on the controller first, then turn on the RC car. When shutting down, turn off the RC car first, then turn off the controller.
Control Functions
Forward
Push both joysticks up simultaneously to move the car forward. Backward
Push both joysticks down simultaneously to move the car in reverse. Turn Right
Push up the left joystick on the controller to turn the car right. Turn Left
Push up the right joystick on the controller to turn the car left. 360° Left Rotation
Push down the left joystick and push up the right joystick simultaneously to spin the car to the left. 360° Right Rotation
Push up the left joystick and push down the right joystick simultaneously to spin the car to the right. 180° Flip
Push both joysticks up simultaneously to move the car forward. Then, push both joysticks down simultaneously to perform a 180° flip. For the best effect, ensure the car moves orward for about 5 meters before pushing both joysticks down for the flip.
Note: Wheel slippage may affect the performance of this action.

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com