kogan MG34H18QV4 34 Inch Freesync USB-C Gaming Monitor User Guide

Table of Contents

Q: Can I use a different AC adapter with this monitor?
- A: Only use the AC adapter provided with your product to ensure compatibility and safety.
Q: What is the recommended cable for connecting my computer to the monitor?
- A: You can use a TYPE-C cable, DP cable, or HDMI cable to connect your computer to the monitor. Please note that a TYPE-C cable is not included in the package.
Q: How do I adjust the monitor’s settings?
- A: You can adjust the monitor’s settings using the OSD menu. Navigate through the menu options to customize brightness, contrast, and other display settings.

Read all instructions before using the appliance and retain them for reference.

Unplug the monitor before cleaning it with a slightly damp, clean cloth.
Wiping the screen once it has been turned off with a dry microfibre cloth is recommended.
Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners.
This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
Avoid placing the monitor near heaters, stoves, fireplaces, or other sources of heat, as well as in rooms lacking adequate ventilation.
Do not insert any objects or spray any liquids into the vents.
Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
Unplug the monitor if it is not going to be used for an extended period.
Do not place heavy objects on the monitor, its power cord, or any connected cables.
Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.
- Only use the AC adaptor provided with your product.
- Do not use the power cord with other products.
- Only use the AC adaptor provided with your product.
- Do not use the power cord with other products.

The base combined with the stand, turn the bottom screw clockwise until tight.
Base the head of the assembled base with the round hole on the back of the monitor, align the three positions on the base, and press down to install.
The installation scope.

Drawings are for reference only and please refer to the actual monitor.
The angle of the screen can be adjusted forward 5° or backward 20° for a comfortable viewing experience.
Be careful not to touch or press the screen area when adjusting the angle of the monitor.

Before installing the monitor on the wall, please detach the stand from the monitor.
To ensure sufficient ventilation, Install the monitor at least 10 cm (4 inches) away from the wall and leave about 10 cm of space at each side of the monitor.
Please consult a professional technician for wall mount installations. The manufacturer accepts no liability for installations not performed by a professional technician.
1. Place a clean, dry, and lint-free cloth on a flat, stable surface.
2. Gently lay the monitor on the cloth with the LCD screen facing down.
3. Identify the four wall mounting screw holes on the back of the monitor.
4. Install the wall mounting bracket (not supplied) on the back of the monitor and attach the monitor to the wall according to the mounting bracket’s instructions.
5. Make sure that all screws (not supplied) are tightened and secured properly.
- Note:
- The mounting hole distance for this monitor is 75 × 75mm.
- VESA mount and mounting accessories are not included.

Before connecting the liquid crystal display to your PC, please shut off the power for the PC and the display.

Power Cable
- Connect the included power adapter to the monitor power port, then connect the other end to a power outlet.
Earphones
- Plug in earphones (not supplied) into the 3.5mm headphone jack on the monitor.
- Note: If audio devices are plugged into the monitor and computer, there will be no sound.
HDMI
- Connect the supplied HDMI cable from the computer’s HDMI port to one of the monitor’s HDMI ports.
DisplayPort
- Connect a DisplayPort cable from the computer’s DisplayPort to the monitor’s Display Port.
TYPE-C
- Connect a TYPE-C cable from the computer’s TYPE-C to the monitor’s TYPE-C.

Insert one end of the HDMI cable into your PC’s graphics card. A DP cable or TYPE-C cable may also be used. A TYPE-C cable is not included.

Connect the other end of the cable to the corresponding connector on your monitor.
Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.
Locate the power button on the monitor and press it to turn the monitor on.
- FreeSync
- The feature itself is on by default when setting a 180Hz refresh rate. To use this feature, please note you must have hardware with FreeSync capability, an HMI cable, and the latest graphic drivers.
- To use this feature, connect your computer and monitor with an HDMI cable.
- After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu.
- See your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.

Note: The functions may be adjusted due to specific models or the upgrade of the software version. The physical model shall govern.