kogan KACRCGPWMGA Car Phone And Watch Charger User Guide
- July 25, 2024
- Kogan
Table of Contents
kogan KACRCGPWMGA Car Phone And Watch Charger
Specifications
- Product Name: KOGAN 2-IN-1 15W Car Phone and Watch Charger
- Model: KACRCGPWMGA
- Compatibility: MagSafe compatible
- Input Voltage: 5V-3A, 9V-3A
- Phone Output: 5W/7.5W/10W/15W
- Watch Output: 2.5W
FAQs
- Q: Can this charger be used with non-MagSafe phones?
- A: Yes, for non-MagSafe phones, you can attach the provided magnetic ring to enable charging on the phone charging pad.
- Q: What should I do if the charger is not working?
- A: Check the connections and ensure that the power adapter is properly plugged in. If issues persist, contact customer support for assistance.
- Q: Is this charger safe to use in all car models?
- A: This charger is designed for use with a 12V accessory outlet in cars. Ensure compatibility with your car’s outlet before use.
SAFETY & WARNINGS
Warnings
- Do not place the charger in temperatures below 0°C (32°F) or above 60°C (140°F).
- Do not attempt to disassemble the charger, expose it to an open flame, or submerge it in water to avoid damaging the charger.
- Always check for damage to the charger, cables, or other accessories before using the charger. If damaged, cease use immediately and contact help.Kogan.com.
- Do not attempt to disassemble or modify the charger in any way, as it may cause serious damage.
- Do not expose the charger to extremely hot, humid, or corrosive environments to avoid damaging the charger.
Important Reminders
- This charger is compatible with Mag Safe-enabled iPhone cases.
- The maximum output of this charger is 15W. Its maximum output for iPhones is 7.5W.
- Only use the cable provided with the charger. Third-party cables may interfere with charging.
- This charger requires a charging adapter that supports QC or PD fast charging and an output of at least 18W.
- This charger will only attach to caseless iPhone 13/12 series phones and official MagSafe cases. It will not attach to any other phones or cases.
COMPONENTS
- 2-in-1 15W Car Phone and Watch Charger.
- USB-A to USB-C Cable.
- Magnetic Ring.
- Suction Mount.
OVERVIEW
OPERATION
- Connect the USB-A end of the provided charging cable to a power adapter (not provided), and the USB-C end to the USB-C port on the charger.
- Connect the power adapter (not provided) to the 12V accessory outlet in your car.
- Place your MagSafe phone on the charging pad. If your phone is not MagSafe, attach the provided magnetic ring to your phone.
Error Detected
- If an error is detected, check that your phone supports wireless charging and does not have any credit cards, stands or other metal attachments on the back (other than the magnetic ring).
- After checking the above, unplug and plug in the charging cable again to resume charging.
Mounting
- Step 1:
- Step 2:
- Step 3:
- Step 4:
SPECIFICATIONS
- Input Voltage 5V-3A, 9V-3A
- Phone Output 5W/7.5W/10W/15W
- Watch Output 2.5W
More Information
- We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>