kogan NSMONTLCDWA Kids Interactive LCD Drawing Tablet User Guide
- July 12, 2024
- Kogan
Table of Contents
kogan NSMONTLCDWA Kids Interactive LCD Drawing Tablet
Specifications
- CPU: F100
- Flash: 16MB NOR
- Ram: 64MB DDR2
- Operating system: UCOS
- LCD display : 2.8 TFT 10.5 LCD
- Drawing surface: LCD display
- Speaker: 1W
- Battery: TIP303450-3.7V/500mAh
- Battery life: ~4.5 hours
- Charging time: ~2 hours
- Interface: USB-C
Product Usage Instructions
Button Functions
- Power button/back/menu button: Controls power and menu navigation.
- Audio description button: Activates audio descriptions.
- Next /volume + button : Moves to the next item or increases volume.
- Rotate: Rotate the display.
- LCD: Shows interactive content.
- Speaker: Outputs audio.
- Previous /volume – button: Moves to the previous item or decreases volume.
- Erase button: Clears the drawing surface.
- Drawing surface: Area for drawing or writing.
- USB-C port: For charging and connectivity.
- Lock button: Locks the device.
- Reset button: Resets the device to default settings.
SAFETY
SAFETY & WARNINGS
- Always take appropriate measures to protect the tablet from drops, fire, shocks, and impacts.
- Maintain a proper distance from objects with strong magnetic interference.
- Do not expose the product to high temperatures or direct sunlight for extended periods.
- If the device overheats, emits smoke, or produces unpleasant odours. Cease use immediately, disconnect it from the power source to prevent the risk of fire. Contact help.Kogan.com for support.
- Keep the device out of the reach of children while it is being charged.
- Charge the product only with a USB-C cable.
- This product is not intended for use by children without adult supervision.
- Avoid applying excessive pressure or using tools that could damage the drawing surface.
- Do not disassemble the product.
- Do not replace the device’s battery. Seek assistance from the service centre for any issues with the tablet’s components.
- Do not operate the device while it is charging.
- Charging time may vary depending on the cable or charger used.
OVERVIEW
- Power button/back/menu button
- Audio description button
- Next /volume + button
- Rotate
- LCD display
- Speaker
- Previous /volume – button
- Erase button
- Drawing surface
- USB-C port
- Lock button
- Reset button
OPERATION
Button Functions
Charging
- Use a USB-C cable and a standard 5V, 1A USB power adapter (not supplied) to charge the tablet.
- Charge the tablet when the battery is low and ensure a continuous power supply for 4 hours to maintain optimal performance.
- You can also use a laptop as a power source with a USB-C cable.
- The indicator light will remain on during charging and will turn off once charging is complete.
SPECIFICATIONS
- CPU: Actions F100
- Flash: 16MB NOR
- Ram: 64MB DDR2
- Operating system: UCOS
- LCD display: 2.8” TFT
- Drawing surface: 10.5” LCD
- Speaker: 1W
- Battery: TIP303450-3.7V/500mAh
- Battery life: ~4.5 hours
- Charging time: ~2 hours
- Interface: USB-C
Disposal
This marking indicates that this appliance should not be disposed of with
other household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
Need more information?
- We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
FAQ
- Q: How do I charge the tablet?
- A: Use the USB-C cable provided to connect the tablet to a power source for charging. The charging time is approximately 2 hours.
- Q: How do I erase the drawings on the tablet?
- A: Press the Erase button to clear the drawing surface and start fresh.
- Q: How long does the battery last?
- A: The battery life is approximately 4.5 hours, but may vary based on usage.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>