kogan KASMHMPCSRA SmarterHome Zigbee Millimeter Wave Human Presence Sensor User Guide

: July 13, 2024
: Kogan

Table of Contents

OVERVIEW
INSTALLATION
OPERATION
Documents / Resources

Kogann.com
USER GUIDE
KOGAN SMARTERHOME™ ZIGBEE MILLIMETER WAVE
HUMAN PRESENCE SENSOR
KASMHMPCSRA

OVERVIEW

kogan KASMHMPCSRA SmarterHome Zigbee Millimeter - OVERVIEW
1

Indicator| • Flashing: The device is in pairing mode.
• Solid: The device is on.
• Off: The device is off.
---|---
Power Port| USB-C.
Pairing Button| Press and hold the Pairing button for 5 seconds until the indicator starts flashing to enter pairing mode.

Note:
This device is designed to be paired with the Kogan SmarterHome™ Bluetooth +
Zigbee Wireless Gateway (KAGTWYBTZBA) (sold separately).

INSTALLATION

Install the device in your desired location. The detection range is 120° and the detection distance is 6 meters, as illustrated below.

OPERATION

Power on the Device
Insert one end of the provided USB-C cable into the USB-C port on the device, and the other end into an adapter (not provided).

Add the Device to the Bluetooth + Zigbee Gateway (Sold Separately)
This device is designed to be paired with the Kogan SmarterHomeTM Bluetooth + Zigbee Wireless Gateway (KAGTWYBTZBA).

To pair the device and the gateway:

Ensure your gateway is paired to the SmarterHomeTM app.
On the device, press and hold the Pairing button for 5 seconds until the indicator flashes.
On the SmarterHomeTM app, tap `Wireless Multi-mode Gateway’.
Tap `Zigbee Sub-Device’.
Tap `Device Management’.
Tap `Add new device’.
The app will search for the device. When the device has been successfully added, tap Next’, and then tapDone’.
When successfully paired, the indicator on the device will turn solid.

App Settings

Tap the Power button in the top right corner to turn the sensor on/off.
Tap the Settings button to enter the Settings menu. Human presence sensor

Detected Range:
Adjust the detected range from 1.5~16m (the tolerance is 0.75 meters).

kogan KASMHMPCSRA SmarterHome Zigbee Millimeter - OPERATION
5

Sensitivity Adjustment:

Adjust the sensitivity to low or high.
Low detects motion such as a hand waving.
High detects subtle motion, such as breath.
Tip: If the object is in a range of 3m, micromovement can be detected, even at a low sensitivity.

Hold Time:
Set a time to pause motion detection.

Power LED:
Enable/disable the power indicator.

Presence Alarm:
Enable/disable the presence alarm.

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
kogan.com

Documents / Resources

| kogan KASMHMPCSRA SmarterHome Zigbee Millimeter Wave Human Presence Sensor [pdf] User Guide
KASMHMPCSRA SmarterHome Zigbee Millimeter Wave Human Presence Sensor, KASMHMPCSRA, SmarterHome Zigbee Millimeter Wave Human Presence Sensor, Millimeter Wave Human Presence Sensor, Human Presence Sensor, Presence Sensor, Sensor
---|---