Immax Neo 07736L LITE Smart Christmas lights User Manual

Immax Neo 07736L LITE Smart Christmas lights

TECHNICAL SPECIFICATIONS

• Protocol: Wi-Fi
• Frequency: 2400MHz~2483.5MHz
• Maximum RF output power: 20dBm

INSTALLATION

1. Use the power adapter with 5V of output voltage only.
2. Install the controller correctly, and use 3M tape to fix it.
3. Please unfold the LED strip to avoid overheating issues. Please connect the cables of the LED strip to the right position on the controller. Test the APP to check if it can control the LED strip correctly. If everything goes well, go to the next step.
4. Check and ensure the power supply, controller, and LED strip are connected correctly.

ATTENTION

1. Do not put any metal around the controller, which could block the WiFi signal.
2. Ensure the power supply and controller are connected correctly.
3. The power supply output voltage should be the same as the LED strip working voltage.
4. Do not cover anything on the surface of the power supply, controller, and LED strip.
5. Ensure the connection is correct before powering.

PRODUCT FUNCTIONS DIAGRAM

DOWNLOAD AND REGISTRATION

Scan the QC Code to download the “ Smart Life” APP. Or Search“Smart Life” in the App store or Google Play to install the APP. Open the “ Smart Life” APP, and tap “Register”- to get an account with your phone number or E-mail. Sign in to the APP.

APP CONNECTION

Preparation jobs:
Power on the LED strip and enter the home of the APP, please make sure your mobile and the smart kits are connected to the same WIFI.

Solution 1)
Reset the LED chain – long-press the L button on the controller for more than 10 seconds. The WiFi LED on the controller will flash red quickly. Find the “+”(in the corresponding room of the APP) to add devices. If your mobile has already turned on Bluetooth before connecting the LED strip, then no need to turn on Bluetooth again, the APP will connect to the LED strip automatically. If your mobile didn’t turn on Bluetooth before connecting the LED strip, the APP will pop up an interface with tips to ask you to turn on Bluetooth. Then please choose “Allow”, then the Bluetooth function of your mobile will be turned on. After that, the APP will pop up tips with info on the LED strips, then choose “Go to add”. Will go into an interface of a Bluetooth device, choose the “+” and go into the next interface(Enter Wi-Fi password). Input the password of the WIFI and choose “Confirm”, then it will go into the status of “Connecting……”, you will need to wait for your mobile to pair with the controller at this step. Choose “Done” when it shows “Added successfully”, then go into operation modes. (If solution 1 is not suitable for your devices, please refer to solution 2).

Solution 2)
Reset the LED chain – long-press the L button on the controller for more than 10 seconds. The WiFi LED on the controller will flash red quickly. Find the “+”(in the corresponding room of the APP) in the interface of “Add manually”. Then choose “lighting” to choose the correct smart devices and go into the interface of “Select 2.4 GHz Wi-Fi Network and enter password”.

Enter the Wi-Fi password, then choose “Next” and wait until pairing success(-make sure your mobile and the smart devices are in the same Wi-Fi networks). Then go into the interface of “Scanning devices”, after scanning success and choosing “Next”, it will pop up the interface of “add successfully” and choose “Done” to go into the operation modes.

APPLICATION

In Immax NEO PRO you can turn the LED chain on and off or control preset programs and the timer.

18 PROGRAMS

You can choose from these 18 preset programs:
Steady, Glow, Overlay, Stack, Updown, Chase, Snake, Sparkle, Twinkle, Fade, Wave, Buddly, Falling, Fireworks, Jump, Blending, Rainbow, Carnival

TWILIGHT FUNCTION

You can change the light intensity with the dimmer bar

COLORS
With this function, you can adjust any color shade.

DIY FUNCTION
With this function, you can create your own effect.

TIMER
Using this function you can set the desired lighting schedule – on, off and days of the week. If the timer function is active, the R button on the controller is white.

CONTROLLER

• The Wifi indicator light blinks RED in pairing mode
• The Wifi indicator light blinks GREEN during connecting to the Internet.
• The Wifi indicator light is steady GREEN on after being connected to the Network.
• The Wifi indicator light blinks GREEN when the wireless router has a Network error.
• Timer indicator light(white) inside the R button

Function Button L

• press 1 time to change the function.
• long press 5 seconds to reset the device.

Function Button R

• press 1 time to change color.
• long press 5 seconds to turn on/ turn off the light.

SAFETY INFORMATION

CAUTION:
Keep out of reach of children. This product contains small parts, which may cause suffocation or injury if swallowed.

WARNING:
Every battery has the potential to leak harmful chemicals that can damage skin, clothing, or the area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come into contact with the eyes or skin. Every battery may burst or even explode if exposed to fire or other forms of excessive heat. Take care when handling the batteries. To reduce the risk of injury from mishandling the batteries, take the following precautions:

• Do not use different brands and types of batteries in the same device
• When replacing the batteries, always replace all the batteries in the device
• Do not use rechargeable or reusable batteries.
• Do not allow children to insert batteries without supervision.
• Follow the battery manufacturer’s instructions for proper battery handling and disposal.

CAUTION:

• CAUTION: The product and batteries should be disposed of at a recycling center. Do not dispose of them with normal household waste.
• CAUTION: To ensure the safe use of the product, wires must be brought to the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of electronics. During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury. CAUTION: Do not disassemble the product, an electric shock may occur.
  CAUTION: Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage. CAUTION: Follow the instructions in the enclosed manual.

MAINTENANCE

Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials. DO NOT USE solvents or other aggressive cleaners or chemicals.

A Declaration of Conformity has been issued for this product. More information can be found at www.immax.cz.

Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immaxneo.cz | www.immaxneo.com Made in P.R.C.

References

• Velkoobchod s LED technikou IMMAX | Immax.cz
• Velkoobchod s LED technikou IMMAX | Immax.cz
• Velkoobchod s LED technikou IMMAX | Immax.cz

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>