Immax neo LITE 07087-5 Remote Control with Beacon Function Instruction Manual
- July 2, 2024
- Immax Neo Lite
Table of Contents
Immax neo-LITE 07087-5 Remote Control with Beacon Function
Product Information
Specifications
- Product Name: Immax Neo Lite Remote Control with Beacon Function
- Protocol: Bluetooth Beacon
- Compatibility: WiFi, Bluetooth Mesh, Beacon devices
Product Usage Instructions
Pairing the Light with the Remote Control
- Ensure the light is added to the app before pairing.
- Turn the light off for at least 5 seconds and then turn it back on.
- Press A, B, C, or D on the remote control for 5 seconds based on the channel you want to use.
- The light should flash to indicate successful pairing.
Resetting
If unable to pair, try resetting the device by turning it on and off 12 times, then proceed with the pairing steps mentioned above.
Controlling Lights
- On/Off: Short press to turn on/off all lights paired to the remote.
- Night Light: Press the button to activate night mode, reducing light intensity to 5%.
Controlling RGB Backlight
- Color Switching: Available on compatible devices.
- Short Press: Switch colors one at a time in the sequence of red, orange, yellow, green, blue, and purple.
- Long Press: Smooth color transition.
Group Control
- A/B/C/D Buttons: Used for creating and controlling lighting groups.
- Pairing: Long press any A/B/C/D button to pair the luminaire with the remote control.
FAQ
Q: How do I know if my device supports RGB color backlight?
A: The color-switching feature is only available on devices that support it. You can try pressing the RGB backlight button to see if it works on your device.
PAIRING THE LIGHT WITH THE REMOTE CONTROL
You must add the light to the app before you can pair the light to the controller.
Pairing the light with the DO:
- Turn the light off for at least 5 seconds and then turn it back on. Press A, B, C, or D on the DO for 5 seconds (depending on which channel you intend to use the light (bulb)). The light should flash to indicate successful pairing with the DO.
- RESET: If you are unable to pair try resetting the device 12x ON and 11x OFF then continue with step 1.
Features
On/Off
- Short press to turn on/off ALL lights that are paired to the remote.
Night light
- Press the button to switch on the night mode, the lamp is dimmed to 5% of the luminous intensity
Bright+
Press the button to increase the brightness of the light
- Short press – step increase in brightness
- Long press – smooth increase in brightness.
Bright-
Press the button to dim the brightness of the light.
- Short press – step dimming
- Long press – continuous dimming
Light temperature +
- Press the button to increase the color temperature of the light. Transition to a cool shade (up to 6500K)
- Short press – step increase in white light temperature
- Long press – stepless increase in white light temperature
Light temperature –
- Press the button to lower the light color temperature. Transition to a warm shade (up to 2700K)
- Short press – stepwise reduction of the white color temperature of the light
- Long press – stepless reduction of the white light temperature
Scenes
- Press briefly to switch the scene.
RGB colour backlight The colour-switching feature is only available on devices that support it!
Button to control RGB backlight
- Short press to switch one color at a time and the preset color cycle is red, orange, yellow, green, blue, and purple.
- Long press for a smooth color transition
A/B/C/D
- Buttons for creating and controlling lighting groups
- Long press any A/B/C/D button to pair the luminaire with the remote control
Technical parameters
- Material: Environmentally friendly PC material.
- Color: White
- Power: 3V (CR2032)
- This remote control can control a luminaire or groups of luminaires from a distance of up to 25m.
- Pairing and unpairing under groups A/B/C/D
Pairing:
- Within 30 seconds after switching on the luminaire, long press any of the A/B/C/D buttons for 5 seconds or more, the indicator light will flash once to indicate successful matching (flashing 3 times if WiFi products).
- This assigns the luminaire under your selected button and allows you to create groups of lights to be controlled under your selected group button A/B/C/D
- Cancel pairing. configured in this group, after successful cancellation of pairing the light will flash once (flash 3 times in case of WiFi products).
- Each beacon-enabled luminaire can be controlled by up to 3 remotes.
Function description
- Group control: Press any group button (A/B/C/D) to switch the luminaire group
- E.g.: you can control all luminaires of group A by pressing the „A“ button.
- Switch on/off: you can switch on/off all luminaires paired under group button A
- Press the „CCT+“ and „CCT-“ buttons to decrease or increase the color temperature by „20%“ at the same time.
- Long press to dim continuously. (Bluetooth does not support continuous dimming).
- Press „brightness+“ and „brightness-“ to adjust the brightness by 10% each time.
- Long press to dim the brightness continuously (Bluetooth does not support continuous dimming).
Warning:
- The above functions are only applicable to products on WiFi, Bluetooth, Sigmesh, and Tuya Beacon protocol.
- Keep the remote control (RC) in a clean and dry environment. Do not immerse the DO in water and prevent the DO from coming into contact with water.
- Remove dirt only with a dry or damp cloth!
- Be sure to insert new batteries in the correct manner and under the symbols for the location of the positive (+) and negative (-)
- poles of each battery. Do not confuse the polarity of the battery.
- Replace batteries regularly with new ones and recycle old ones under local regulations.
- Manufacturer and importer: WPB CZ, s.r.o. Pohoří 703, 742 85 Vřesina, Czech Republic
- www.immax.cz
- www.immax.eu
Documents / Resources
|
Immax neo LITE 07087-5 Remote Control with Beacon
Function
[pdf] Instruction Manual
07087-5, 07156-45, 07087-5 Remote Control with Beacon Function, 07087-5 Remote
Control, Remote Control with Beacon Function, Beacon Function, Remote Control
---|---
Read User Manual Online (PDF format)
Loading......