Immax Neo 07117-2 Smart Bridge Pro User Manual
- June 4, 2024
- immax neo
Table of Contents
Immax Neo 07117-2 Smart Bridge Pro
Product Description
It is a mini Smart Gateway. It consists of a highly integrated Wi-Fi module, low power-consuming ZigBee module, and PCBA. It can be connected to the Smart life Smart app for device adding, reset, third-party control, and ZigBee group control, meeting smart home requirements
Preparation For Use
You can scan QR code for download below. 2 Open the Wi-Fi of your phone, click on the “+” in the upper right corner, and select “Smart Gateway”; The gateway to be added will automatically appear, and please follow the instructions in the App.
QR code for application download
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body
EN-Technical specifications
- White: color
- Protocol: ZigBee 3.0, W-Fi
- Frequency: 2400MHz-2483.5MHz
- Maximum RF output power: Wi-Fi: 20dBm ZigBee: 10dBm -max 19dBm
- Power consumption: max 4.2W
- Input voltage: AC 230V 50-60Hz
- Smart Gate Input Voltage: 5V 1A
- Dimensions: 16.1 x60.5 x 60.5 mm
- Weight: 50g9
References
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz