Immax Neo 07904L Smart Solar Lamp User Manual
- June 9, 2024
- immax neo
Table of Contents
Immax Neo 07904L Smart Solar Lamp
TECHNICAL PARAMETERS
- Communication protocol: Bluetooth
- Solar panel: polycrystalline silicon 5V/3W
- Battery: 18650, Lithium battery 3.7V/2000mAh
- Type and number of LEDs: 12*2pcs, LED2835
- Charging time: 5-6 hours
- Working time:10-12 hours
- Degree of protection:IP54
- Function: light control by app
- Chromaticity: 6000-6500K / 3000-3500K / RGB
- Material: aluminum + PC
SAFETY INSTRUCTION
- Before installing the solar luminaire, read the instructions carefully. And follow the instructions given.
- Allow the solar luminaire to charge sufficiently in sunlight for at least 4-6 hours before using it for the first time.
- The luminaire will charge during the day and automatically light up after dark.
- If the solar lantern is not working properly or the working time is short, place it directly in the sun and let it charge for 2 days in direct sunlight. Do not switch on the solar lamp during this process. The battery should be fully charged.
NOTICE
- Install the product preferably where there are no trees, gutters or other obstructions that could block sunlight. If the solar panel does not have enough sunlight, it will affect the shining time.
- Do not install the product under other light fixtures. Lighting generated by other fixtures may cause the product to malfunction or flicker.
- The product has a light sensor, use it where there is no light.
- Rainy, foggy, or cloudy weather will affect lamp charging, working time will be shortened.
- The performance of the solar reflector depends on the environment, latitude, seasons, etc.
- Install the product preferably in places where there are no trees, gutters, and other obstacles that could block sunlight. If the solar panel does not have enough sunlight, it will affect the shining time
- The solar spotlight contains batteries, please recycle the batteries in accordance with the relevant laws and regulations of the user‘s country or region.
- Do not immerse the solar panel in water
MAINTENANCE
In order to allow the PV panel to receive maximum solar radiation, keep the solar panel clean by wiping it with a soft, damp cloth. Avoid abrasive and cleaning agents!
PRODUCT MANUAL
Press the switch
- Press the switch first, turn on to 100%.
- Press the switch second, turn on at 50%.
- Press the switch a third time, turn off
- Press the switch for 2-3 seconds, transfer CCT (Test light works when you place it in a dark environment or cover the solar panel.)
LIGHT CONTROL
- It switches on automatically in the light.
- Cyclic switching
- Charged by the sun during the day
THE PACKAGE CONTAINS
- 1 x Solar Lawn Lamp
- 1 x instruction manual
- 2 x screw
INSTALLATION STEPS
- Drill two holes on the ground according to the spacing of the base holes and insert the spacer screw.
- Align the base with the expansion bolt socket and tighten the nut.
- Press the switch to turn on the light.
ABOUT COMPANY
- Manufacturer and importer: WPB CZ, s.r.o. Pohoří 703, 742 85 Vřesina, Czech Republic
- www.immax.cz
- www.immax.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>