immax neo 07712L Intelligent Friendly Light User Manual
- June 3, 2024
- immax neo
Table of Contents
immax neo 07712L Intelligent Friendly Light
TECHNICAL SPECIFICATIONS:
- Protocol: Wi-Fi
- Frequency: 2400MHz~2483.5MHz
- Maximum RF output power: WIFI: 20dBm
DOWNLOAD IMMAX NEO PRO AND REGISTRATION
Scan the QR code and download the Immax NEO PRO application.
- Launch the Immax NEO PRO application and click on “Register” and create your own account.
Possibility to add via Bluetooth
Connect your mobile to your Wi-Fi router , use wall switch to control On and
Off cir 5cle for 5 times, the light will twinkle again as to factory state,
click“+” in the upper right corner of homepage or click “Add Device” 
.Turn on the Bluetooth in mobile: The app will ask you to turn on
the Bluetooth in your mobile, then you choose the device to add.
enter into your Wi-Fi name and Wi-Fi password, it will connect the network
automatically.
Do not turn on the Bluetooth
Select ”LED light – WIFI”, enter into the Wi-Fi password, make sure the LED is
blinking rapidly, if not, use wall switch to control On and Off circle for 3
times, the light will twinkle again as to factory state, and then wait it will
connect automatically.
SAFETY INFORMATION
CAUTION: Keep out of reach of children. This product contains small
parts, which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that
can dam-age skin, clothing or area where the battery is stored. To avoid the
risk of injury, do not allow any substance from the battery to come into
contact with the eyes or
excessive heat. Take care when handling the batteries. To reduce the risk of
injury from mishandling the batteries, take the following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to insert batteries without supervision.
- Follow the battery manufacturer’s instructions for proper battery handling and disposal.
CAUTION: The product and batteries should be disposed of at a recycling
center. Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the
installation site according to valid regulations. The installation must only
be carried
During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product.
Do not operate the device if the power cord shows signs of damage.
CAUTION: Follow the instructions in the enclosed manual.
MAINTENANCE
Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information can be found at www.immax.cz
References
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>