Immax Neo 07744L Solar Panel 5V/0 User Manual

: June 9, 2024
: immax neo

Table of Contents

IN THE BOX
TECHNICAL SPECIFICATIONS
SAFETY INFORMATION
MAINTENANCE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Solar panel 5V/0,6A/3W IP65
USER MANUAL

IN THE BOX

Immax Neo 07744L Solar Panel 5V 0 - IN THE BOX

TECHNICAL SPECIFICATIONS

Maximum power: 5V / 0.6A; output protection, short circuit protection
Charging method: solar charging
Peak power (PMAX): 3 W
Charging current: 600 mA
Working temperature: -10°C – 60°C
Product size (mm): 130 x 184 x 22 mm
Degree of protection: IP65

SAFETY INFORMATION

CAUTION: Keep out of reach of children. This product contains small parts, which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can damage skin, clothing or area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come into contact with the eyes or skin. Every battery may burst or even explode if exposed to fire or other forms of excessive heat. Take care when handling the batteries. To reduce the risk of injury from mishandling the batteries, take the following precautions:

Do not use different brands and types of batteries in the same device
When replacing the batteries, always replace all the batteries in the device
Do not use rechargeable or reusable batteries.
Do not allow children to insert batteries without supervision.
Follow the battery manufacturer’s instructions for proper battery handling and disposal.

CAUTION: The product and batteries should be disposed of at a recycling centre. Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of electronics. During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product.
Do not operate the device if the power cord shows signs of damage.
CAUTION: Follow the instructions in the enclosed manual.

MAINTENANCE

Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information can be found at www.immax.cz

INSTALLATION TIPS
We recommend fixing the bracket using the supplied screws and screw buts. Mark the desired position with a pencil and drill holes in the wall.
Now carefully tap the dowels into the holes with a hammer. Now place the bracket on the drilled holes and screw the screws into the dowels one after the other. Once the solar panel is installed, we can connect the solar panel and camera by the DC-Micro Usb cable.

TIPY PRO INSTALACI

Bracket should be installed at a height of at least 2.1m
Optimumtilt angle for the panel is +5 degrees
Make sure that there are no power or water pipes behind the hole
Mount solar panel in a sunny spot
Position the solar panel to the south

Note: If you do not feel confident with installing, please contact a professional to avoid any eventual issues / dangers.
POTENTIAL INFLUENCES ON THE PERFORMANCE OF THE PANEL

Weather (snow, rain, cloudy)
Heavy use of the wireless IP camera due to live access or motion detector
Pollen or other influences. Regularly wipe the surface of the panel with a damp cloth (without chemicals , only with water)

Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU
www.immax.cz
Made in P.R.C.