immax neo 07740L LED WRGB Aquarium Lighting User Manual
- June 6, 2024
- immax neo
Table of Contents
immax neo 07740L LED WRGB Aquarium Lighting
AQUARIUM LIGHT
WIFI CONTROLER
DOWNLOAD AND REGISTRATION
Scan the QC Code to download “ Smart Life” APP. Or Search“Smart Life”in App
store or Google Play to install the APP. Open the “ Smart Life” APP, tap
“Register”- to get an account with your phone number or E-mail. Sign in the
APP.
APP CONNECTION
Preparation jobs: Power on the LED strip and enter the home of APP, please
make sure your mobile and the smart kits are connected to the same WIFI.
PAIRING THE PRODUCT INTO THE APPLICATION
Preparation: Switch on the LED luminaire and open the Immax NEO PRO applica-
tion. Make sure you are connected to the same WiFi network that the product
will be connected to.Reset the LED luminaire – long press the button on the
controller for more than 3 seconds. The LED light starts flashing quickly.In
the Immax NEO PRO application, click the Room tab and then the “+” button to
add a device. In the Immax NEO tab, select the product.Enter the access data
to the WiFi network and confirm. The product is then paired and added to the
Immax NEO PRO application.
INSTALLATION
WARNING
WARNING: Before connecting to electrical power, make sure that all cables
are properly connected, otherwise the light may be damaged.
CAUTION :
- Failure to follow the handling instructions may result in damage to your property or other property.
- Never put a light or smart controller in the water. It could be dangerous and damage your light.
- Before handling the aquarium lighting, switch it off and disconnect all cables and cords that are connected to it.
- Never forcibly connect the power cord connector to the port. Make sure that the power supply is not exposed to water or moisture.
When cleaning the outside of the aquarium light, first turn off the aquarium light and unplug the power cord. Then use a damp, soft, lint-free cloth to clean the outside of the lamp. Do not allow moisture to enter any openings. Do not spray liquid directly on the luminaire. Do not use aerosol sprays, solvents or abrasives that could damage the finish.
TECHNICAL PARAMETERS
- Protocol: Wi-Fi
- Frequency: 2400MHz ~ 2483.5MHz
- Maximum RF output power: WiFi: 20dBm
- LED life: 30,000 hours
- Power supply: DC 24V/1A
- Power cord length: 150cm
A Declaration of Conformity has been issued for this product, more information at www.immax.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>