immax neo 07719L LITE Smart Security Outdoor Camera RACKET Solar User Manual

: June 6, 2024
: immax neo

Table of Contents

Technical specifications
Packing List
Appearance
Installation Guide
Quick-operation Manual
- Main Function Description
- Download for App
Register/ Log in with existing account
- Add Device
- Function description
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

immax neo 07719L LITE Smart Security Outdoor Camera RACKET Solar

Technical specifications

Built-in motion sensor: PIR
Chipset: Hi3518EV200 ARM926 @ 800MHz
WIFI module: Hi1131
WIFI protocol: 2.4 GHz WIFI, IEEE 802.11 b / g / n
Sensor: F23
Resolution: FULL HD 1920 x 1080 px
Lens: 4mm
Maximum scanning distance: 0-15m
Viewing angle: 70 °
Response time: 1s
Battery capacity: 10400mAh (4x 2600mAh)
Solar panel power: 6W
Maximum charging current: 1000 mA
Night mode: YES (automatic mode switching after dark)
IR LED power: 4W (4x 1W)
Memory: microSD memory card, max 64GB (not included)
Detection distance: 0-10m
Detection angle: 120 °
Operating temperature: -10 ° C to 60 ° C
Operating humidity: 0% – 90% relative humidity
Power source: solar + built-in lithium battery
Estimated standby power consumption: 0.003W
Expected energy consumption in working power: day 2W / night 4W
Degree of protection: IP66
Dimensions: 198 x 110 x 84 mm

Packing List

After opening the package, please check the low-power wireless battery camera (the “Equipment”) to verify whether the following parts are complete.

Equipment

|

Bracket

---|---

Screw Package (including Screw)

|

Quick Start Guide

Appearance

Reset: When the Equipment is working, press this button for 5 seconds to reset to the default settings
Press and hold the Reset button for 8 seconds. Do not release when you hear the first voice. Wait until the second voice of the device is turned off. Press the Reset button when you turn it on.

TF Card Slot| The user can insert 8G 、16G 、32G SD card (Please use branded card with C10 and above) to store video image ‑les
---|---
Speaker| Used to send out a system prompting sound and achieve voice dialogue
Reset Button| When the Equipment is working, press this button for 5 seconds to reset to the default settings
USB Interface| The battery of the equipment is charged through the USB interface, When connected USB the equipment will be automatically turned on
Power Button| Press and hold for 3 seconds to shut o, you can hear the horn sound; In sleep mode, press briey for 1 second to wake up the device; Under the blue light working condition. short press 1 second to push message
Battery Compartment| Youcan install two 18650 batteres (please note the positive and negative direction, the negative electrode is facing outward), You do not have to connect the equipment to the wire power, Just the batteries will power the equipment
MIC| Used to collect ambient sound and achieve vocal dialogue
IR LED| In the event of inadequate ambient light, turn on the IR LED to increase the brightness
Lens| Used to collect the image and video
Solar panel| Solar panels permanently charge the battery
PIR| PIR supported,when someone is at the eective distance of the camera, warning informaation is immediately pushed to the cell phone app
Indicator Lights| Red light is always on : Network connection failed;The blue light is always om: The device is connected successfully and working
Light Sensor| Photoresistor starts when the ambient light is dark
Fixed Hole| Use the mounting screws included in the accessory kit to ‑x the rear stand
Stent Screw| For vertical stand(optional)

Installation Guide

As shown in the figure, install the stand

➊ Use the screws in the mounting kit to fit the bracket on the wall

➋ Mounting two 18650 specification batteries (Only 1 pcs battery can also be used. Pay attention to the positive and negative electrodes)

➌ Cover the battery cover, push down and lock the security screws to complete the installation

➍ Fixed the camera with brakect

Quick-operation Manual

Main Function Description

Download for App

Search for “Tuya” app in App Store/App Market, or scan the QR code below to download.

Register/ Log in with existing account

Register
If you don not have an App account yet, you can register an account or log in via SMS verification code. Please read the current page and the next page for the description of registration process.
Click “Create New Account”, enter Privacy Policy page on Tuya App, click to Agree and enter to the registration page for Mobile number or E-mail address
Log in with existing account
If you have already registered an account, you can skip the creating a new account,click “Log in with existing account”, enter the log in page.
(1) The system automatically select the current Country/Region, or you can manually select the Country/Region.
(2) Enter your registered mobile number or e-mail address, enter your password to log in the system.
Log in with social media account.
If your phone has installed WeChat App or QQ App, click WeChat/QQ icon in the log in with social media acount area. After accessing the authorization page, log in the system.

Add Device

A. QR code net-pairing (Recommended)
The product only support 2.4GHz Wi-Fi network. It does not support 5GHz Wi-Fi network. Before configuring Wi-Fi, please set the router parameters. The Wi-Fi password should not contain special characters of ~!@#$%”&*().When configuring Wi-Fi, make sure your router, mobile and device are as close as possible for a quick configuration of the device.

App supports QR code net-pairing and Wi-Fi connetion. You can choose to add device by other options.(Figure 0)
Power the camera, and you can the broadcast “Wait for Y Fai config”, (if you heard nothing at all, please click “reset” to restore the factory settings).
When the mobile phone connecting to Wi-Fi, click “Add Device” (figure1) on the Home of the App, select “Security & Sensor”(figure 2)- “Smart Camera”, click “next step” (figure 3).
Enter Wi-Fi account and password, click “Confirm” (figure 4).
Hold the mobile phone screen in the front of the camera (figure 5), the distance between the two should be 15 to 20 cm. (figure 6) Try not to shake the mobile phone during the scanning.
When you hear “Connect Router”, click “Connect Internet\ and wait for connecting (figure 7).
Device added successfully (figure 8), you can shoose the device name and room scene.

B. WIFI Fast Connection Distribution Network can be connected according to the above steps, skipping Fig. 5 and Fig. 6.

Function description

Real-time preview interface

Setting & Management
Wi-Fi signal strength
Sound switch
SD/ HD
Full screen
Screenshot
Voice chat
Record live view
Playback of video
PTZ control (The camera can be arbitrarily rotated to give you a different perspective. You can move it up and down, capture any corner you want to view)
Motion detection alarm (abnormal report notification through intelligent detection of anomaly in home. You can go out to work and play confidently.
To set the alarm level according to the camera’s filed of view can make the alarm more accurate)

Click ” ” in the upper right corner of the control page for the management and setting of the device.

Device Name can modify the device name and device location;
Share Device- can share this device to other people, enter the people’s mobile phone number; (Note: the entered mobile phone number should be registered with a Tuya App account).
Device Information- to view: Device ID, Wi-Fi signal strength, IP address, Mac address, Device time zone.
Echo-amazon alexa Use Echo-amazon alexa (figure 10).
Motion detection- can set the motion detection switch and motion detection alarm sensitivity.
Memory card settings- switch.
Value-added Service Purchase video cloud storage service (optional according to customer needs).
Firmware Information – Support OTA Remote Upgrade (Do not disconnect during upgrading).