Immax Neo 07907L Lite Bubbles Smart Solar Wall Lamp User Manual
- June 9, 2024
- immax neo
Table of Contents
Immax Neo 07907L Lite Bubbles Smart Solar Wall Lamp
TECHNICAL PARAMETERS
- Communication protocol: Bluetooth
- Solar panel: monocrystalline silicon 5.5V/3.7W
- Battery: 18650, Lithium battery 3.7V/4000mAh
- Type and number of LEDs: 58+18pcs, LED2835
- Charging time: 4-5 hours
- Working time:10-12 hours
- Degree of protection: IP54
- Function: light control by app
- Chromaticity: 6000-6500K / 3000-3500K / RGB
- Material: aluminum + PMMA
SAFETY INSTRUCTION
- Before installing the solar luminaire, read the instructions carefully. And follow the instructions given.
- Allow the solar luminaire to charge sufficiently in sunlight for at least 4-6 hours before using it for the first time.
- The luminaire will charge during the day and automatically light up after dark.
- If the solar lantern is not working properly or the working time is short, place it directly in the sun and let it charge for 2 days in direct sunlight. Do not switch on the solar lamp during this process. The battery should be fully charged.
NOTICE
- Install the product preferably where there are no trees, gutters or other obstructions that could block sunlight. If the solar panel does not have enough sunlight, it will affect the shining time.
- Do not install the product under other light fixtures. Lighting generated by other fixtures may cause the product to malfunction or flicker.
- The product has a light sensor, use it where there is no light.
- Rainy, foggy, or cloudy weather will affect lamp charging, working time will be shortened.
- The performance of the solar reflector depends on the environment, latitude, seasons, etc.
- Install the product preferably in places where there are no trees, gutters, and other obstacles that could block sunlight. If the solar panel does not have enough sunlight, it will affect the shining time
- The solar spotlight contains batteries, please recycle the batteries in accordance with the relevant laws and regulations of the user‘s country or region.
- Do not immerse the solar panel in water
MAINTENANCE
In order to allow the PV panel to receive maximum solar radiation, keep the solar panel clean by wiping it with a soft, damp cloth. Avoid abrasive and cleaning agents!
PRODUCT MANUAL
- Press the switch
- First press the switch, turn on 100%.
- Press the switch as the second one, turn on to 50%.
- Press the switch for the third time, it will turn off
- Press the switch for 2-3 seconds, transfer CCT
- (The test light works when you place it in a dark environment or cover the solar panel.)
LIGHT CONTROL
- It turns on automatically when there is light.
- Cyclic switching
- It is charged by the sun during the day
PACKAGE CONTENTS
- 1 x Solar Wall Lamp
- 1 x instruction manual
- 2 x plastic dowel
- 2 x screw
- 1x metal bracket
INSTALLATION STEP
- Drill two holes in the wall according to the distance of the hole in the bracket, then insert the dowels.
- Using a screwdriver, fasten the bracket firmly to the wall.
- Align the hole of the base with the hole in the metal plate, then fix it with a screw.
- Picture of a correctly installed light fixture
ABOUT COMPANY
- Manufacturer and importer: WPB CZ, s.r.o. Pohoří 703, 742 85 Vřesina, Czech Republic
- www.immax.cz
- www.immax.eu
Read User Manual Online (PDF format)
Loading......