Immax Neo 07774L NEO LITE Smart External Socket User Manual
- June 12, 2024
- immax neo
Table of Contents
Immax Neo 07774L NEO LITE Smart External Socket
Product Information
This product is the Immax NEO PRO, a smart device that can be controlled through the Immax NEO PRO app. It is manufactured in P.R.C. and operates on Wi-Fi protocol with a frequency range of 2400MHz to 2483.5MHz. The maximum RF output power for Wi-Fi is 20dBm.
Product Usage Instructions
- Download and Install the Immax NEO PRO App:
- Scan the QR code provided in the user manual to download the Immax NEO PRO app.
- Alternatively, search for and install the Immax NEO PRO app in the App Store or Google Play.
- Create an Account:
- Launch the Immax NEO PRO app and tap on “Register” to create your own account.
- Complete the registration process and then log in with your account.
- Pairing the Product to the Application:
- Make sure the device is switched on and open the Immax NEO PRO app.
- Ensure that your mobile device is connected to the same Wi-Fi network as the product.
- If you have Bluetooth enabled on your mobile device, long press the button on the device for more than 5 seconds. The LED light on the device will flash rapidly. The mobile device will automatically find the product and prompt you to add it in the app.
- If you do not have Bluetooth enabled, perform a device reset by long pressing the button on the device for more than 5 seconds. The LED light on the device will flash rapidly. In the Immax NEO PRO app, click on the “Room” tab and then on the “+” button to add the device manually.
- Enter the access Wi-Fi network details and confirm. The product will be paired with the app.
- Safety Instructions:
- Keep the product out of reach of children as it contains small parts that may cause suffocation or injury if swallowed.
- Dispose of the product and batteries at a recycling center, not with normal household waste.
- Ensure safe installation by following applicable wiring codes. Installation should only be performed by a person with appropriate electrical certification. Disconnect the supply cable during installation or when a fault is detected. Improper installation can lead to product damage and injury.
- Do not disassemble the product to avoid the risk of electric shock.
- Use only the original power adapter supplied with the product. Do not operate the unit if the power cord shows signs of damage.
- Follow all instructions provided in the enclosed manual.
- Maintenance:
- Protect the equipment from contamination and dirt.
- Wipe the unit with a soft cloth, avoiding rough or coarse materials.
- Do not use solvents or aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. For more information, please visit www.immax.cz.
Or search for and install the Immax NEO PRO app in the App Store or Google Play.
- Launch the Immax NEO PRO app and tap “Register” to create your own account.
- Once you have completed registration, log in with your account.
PAIRING THE PRODUCT TO THE APPLICATION
Preparation: switch on the device and open the Immax NEO PRO app. Make
sure you are connected to the same WiFi network that the product.
Bluetooth add-on option
- Reset the device – long press the button on the device for more than 5 seconds. The LED light on the device will flash rapidly.
- If you do not have Bluetooth enabled on your mobile device, you will be prompted to do so. Once Bluetooth is turned on, the mobile device will automatically find the product.
- A window will appear in the app informing you that a new device has been found. Click t 5he “Continue” button and then the “+” button. Enter the access WiFi
network and confirm. The product will then be paired and the Immax NEO PRO app will be added.
Option to add without using Bluetooth
- Perform a device reset – long press the button on the device for more than 5 seconds. The LED light on the device will flash rapidly.
- In the Immax NEO PRO app, click on the Room tab and then on the “+” button. button to add the device. In the Immax NEO tab, select the product. Enter the access
- WiFi network and confirm. The product will then be paired and added to the app Immax NEO PRO.
WARNING:
- DO NOT connect devices that exceed the rated wattage of this outlet. Overheating or damage to the device or other equipment could occur.
- DO NOT use the power outlet if the cord is damaged in any way. Electric shock and injury could result. Extension cords can be used with this outlet; make sure the extension cord can handle the voltage of the outlet.
- DO NOT attempt to repair, disassemble or modify this equipment under any circumstances. Damage to the equipment or electric shock could result.
- DO NOT place the power outlet near heat sources or in direct sunlight.
- DO NOT use or operate the power outlet in an environment with high humidity.
- DO NOT use the power outlet if there is a peculiar odor or smoke coming from the outlet or connected equipment, contact customer support immediately.
- DO NOT touch any electrical appliances with wet hands or handle appliances near liquids.
- Do not use excessive force when handling the socket.
- Always keep the power outlet dry and clean.
- DO NOT use any solvents or cleaning solutions on the power outlet. Clean only with a soft, dry cloth.
- Never overload electrical circuits as this could cause electric shock or fire.
Safety information
- WARNING: Keep out of reach of children. This product contains small parts that may cause suffocation or injury if swallowed.
- WARNING: Each battery has the potential to leak harmful chemicals that can dam-age skin, clothing or the area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come in contact with your eyes or skin. Any battery can rupture or even explode if exposed to fire or other forms of excessive heat. Use caution when handling batteries. To reduce the risk or injury caused by improper handling of batteries, take the following precautions:
- Do not use different brands and types of batteries in the same device.
- When replacing batteries, always replace all batteries in the device.
- Do not use rechargeable or reusable batteries.
- Do not allow children to install batteries without supervision.
- Follow the battery manufacturer’s instructions for proper battery handling and disposal.
- NOTE: The product and batteries should be disposed of at a recycling center. Do not dispose of with normal household waste.
- WARNING: To ensure safe use of the product, wiring must be brought to the point of installation in accordance with applicable codes. Installation must only be performed by a person with appropriate electrical certification. During installation or when a fault is detected, the supply cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can lead to product damage and injury.
- WARNING: Do not disassemble the product, possibility of electric shock.
- WARNING: Use only the original power adapter supplied with the product. Do not operate the unit if the power cord shows signs of damage.
- WARNING: Follow the instructions in the enclosed manual.
Maintenance
- Protect the equipment from contamination and dirt.
- Wipe the unit with a soft cloth, do not use rough or coarse material.
- DO NOT use solvents or other aggressive cleaners or chemicals.
- A Declaration of Conformity has been issued for this product, for more information please visit www.immax.cz
DOWNLOAD IMMAX NEO PRO AND REGISTER
Scan the QR code and download the Immax NEO PRO app
References
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>