Immax Neo 07002BD neo Intelligent Friendly Light User Manual
- June 4, 2024
- immax neo
Table of Contents
neo Intelligent Friendly Light
**User Manual
07002BD
**
Imax NEO Smart remote v2 Zigbee 3.0
LIGHTING DEVICES CONTROL VIA AN APP
- When initially powering on the Lighting device:
– The lighting Device will start breathing smoothly in cold white color and wait to be connected to Gateway via App (During this breathing time, the Lighting device can NOT be paired directly to the remote).
– After being successfully connected to Gateway, Light will stay in steady cold white and brighter. Now users can use the app to control the Light normally!
LIGHTING DEVICES CONTROL VIA REMOTE
Connecting Process:
We provide 3 flexible methods for consumers to use Remote to control Light(s).
Below Method A and Method B is when the user ALREADY adds the Light into the
app.
Method X is for those Light(s) which has NOT been added to App.
METHOD A (ONLINE PAIRING MODE)
Step 1: On the remote control, long press the “ON” and “OFF” buttons
simultaneously for 5 seconds, and the LED indicator of the remote control will
start to flash slowly.
Step 2: In the Imax NEO PRO app, under the Home tab, click “+” to select the
option to add a new product. Select the remote control from the list of
devices. Then follow the instructions in the app.
Step 3: Then open the remote tab in the app and click on the icon on the top
right – assign lights to the remote.
Step 4: Press “+” and “-” on the remote at the same time, and the LED
indicator will flash.
METHOD B (OFFLINE PAIRING MODE)
Put the remote VERY close to the bulb and long press the “ON” button of the
remote until Light breath 3 times. Then the light will be removed in the
gateway and linked directly to the remote.
Note : Method B can only pair ONE Light at a time, and can maximumly
connect and control 30 lights.
– Method X (No App connected):
Before you try Method X, please make sure the Light is NOT in continuously
breathing status.
We can always use a Remote to connect to Light by long pressing the “ON”button
until it breath 3 times.
CONTROL PROCESS
Please see below a snapshot of 4 simple functions that our remote now supported after you connected the Light to the Remote.
DISCONNECT PROCESS
- If the user previously used Method A and already added both Remote and Lights to the App, then the user can directly edit to delete the light on the Remote page.
- If the user previously used Method B or Method X for connecting, Then he needs to put the Remote very close to the Light and long press the “OFF” button until the Light breathes smoothly 3 times, which proves to disconnect is completed.
DOWNLOAD THE IMMAX NEO PRO APPLICATION
https://smartapp.tuya.com/immaxneosmart