kogan NBSOLWATPUA Solar Water Pump User Guide
- July 11, 2024
- Kogan
Table of Contents
kogan NBSOLWATPUA Solar Water Pump User Guide
USER GUIDE
OVERVIEW
A: Solar panel with pump
B1: Connecting pipe
B2: Nozzle 1
B3: Nozzle 2
B4: Nozzle 3
B5: Nozzle 4
INSTALLATION
- Attach connecting pipe B1 to the pump outlet, then connect pipe B2, followed by the nozzles in sequence.
- Place the product in water, ensuring the water pump is completely submerged. Allow direct sunlight to shine on the solar panel without any shade for the pump to start spraying water.
OPERATION
- Before using the product, remove the protective film from the solar panel to ensure normal operation.
- Ensure the entire solar panel is directly facing the sun. The pump may not work under shadows or clouds.
- The pump will automatically restart within 3 seconds when bright sunlight shines directly on the solar panel again.
- The pool should contain enough water to ensure the pump is completely submerged.
- Clean the pump and panel regularly. Ensure nothing covers any part of the solar panel or blocks the pump.
- The power of the solar panel depends on sunlight, so the pump’s performance is influenced by weather, seasons, and location.
- Do not operate the pump without water for extended periods, as this will reduce its lifespan.
- If the water nozzle is blocked, remove the pump for cleaning (as illustrated).
- Lifetime: ≥ 10,000 hours.
SPECIFICATIONS
Solar Panel: 10V/2.4W
Maximum Water Height: 40-90cm
Size of Solar Panel: Ø180mm
The Power of Pump: 0.8~1.85W
Maximum volume of Flow: 210L/h
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>