kogan KASBD100MAA 100w Dolby Atmos Soundbar with Built In Subwoofer User Guide

USER GUIDE

2.1CH 100W DOLBY ATMOS
SOUNDBAR
WITH BUILT-IN SUBWOOFER
KASBD100MAA

SAFETY & WARNINGS

• For your safety, the information in this user guide must be followed to minimise the risk of fire or explosion, electric shock or to prevent property damage, personal injury, or loss of life.

• Read all instructions carefully and retain this guide for future reference.

• If you are not completely confident in wall mounting this product, consult a licensed trade professional before installation. It is extremely important that this product is installed correctly. If mounting is not carried out in the correct manner, there is a high risk of injury and/or damage to your TV and/or other objects.

• The soundbar should not be used near water, such as near a bathtub, sink, bathtub, or swimming pool.

• The soundbar should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings.

• This soundbar should not be built in (i.e. to a bookcase or cabinet), which may impede the flow of air through the ventilation openings.

• The soundbar should be situated away from sources of heat such as radiators, heat registers, stoves or other appliances (including amplifiers).

• The soundbar should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

• Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cord exits the soundbar to where it is plugged into an electrical outlet.

• Clean the soundbar only with a dry cloth.

• Care should be taken to ensure that objects do not fall, and liquids are not spilled into any openings or vents on the soundbar.

• Do not use attachments not recommended by Kogan.com.

• In the instance of lightning or a power surge, unplug the soundbar from the electrical outlet to prevent damage to the soundbar.

• Do not overload electrical outlets, extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock.

• In the following instances where the soundbar is damaged, cease use immediately and contact help.Kogan.com for support:
  • The power cord or plug has been damaged.
  • Objects have fallen on or liquid has been spilled into openings of the soundbar.
  • The soundbar has been exposed to rain.
  • The soundbar has been dropped or damaged.
  • The soundbar exhibits a marked change in performance or does not operate normally.

• If the soundbar is to be left unused for an extended period, such as a month or longer, the power cord should be unplugged from the soundbar to prevent damage or corrosion.

• Do not attempt to repair the soundbar yourself. If the soundbar is damaged, cease use immediately and contact help.Kogan.com for support.

• Refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the soundbar.

• To reduce the risk of fire or electric shock, do not expose this soundbar to rain or moisture, including dripping or splashing. Ensure that no objects filled with liquids, such as vases, are placed on the soundbar.

• The electrical outlet must be accessible after installation.

• If the battery leaks, wipe away the leakage inside the battery compartment and replace the battery with a new one.

• Do not use any batteries other than those specified.

• Do not heat or disassemble batteries. Never throw batteries into fire or water.

• Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short circuit, leak or explode.

OVERVIEW

Soundbar

**1| ** Power/Source Button| • Press to power on.
• Press and hold to enter Standby mode.
• When powered on, press to select an input source.
---|---|---
2| – Button| Press to decrease the volume.
3| + Button| Press to increase the volume.
4| Remote Control Sensor| Receive signals from the remote control.
5| Display| Digital display screen.

6| Optical In| Connect to an optical audio output port on a TV or digital device.
---|---|---
7| Coaxial In| Connect to a DVD player, gaming console, or set-top box.
8| 3.5mm Aux-in| Auxiliary audio input from MP3/phone/set-top box devices.
9| USB Port| Connect a USB flash drive to the USB port on the soundbar.
10| DC In| Connect to power.
**11| ** HDMI ARC| Connect to a compatible TV, allowing the soundbar to receive audio signals from both external devices and the TV itself through a single HDMI connection.
12| SUB Out| Connect to an external subwoofer.

Remote Control

1|

| Switch between ON and STANDBY mode.
---|---|---
2|

Mode

| Press to select an input source.
3|

| Mute the sound.
4|

| Increase the volume.
5|

| In Bluetooth/USB mode, skip to the previous track.
6|

| In Bluetooth/USB mode, skip to the next track.
**7**|

| • In Bluetooth/USB mode, start or pause playback.
• If the speaker is already connected and you would like to connect to a different device, press and hold for 3 seconds to break the current connection and initiate a new pairing.
8|

| • Decrease the volume.
**9**|

**Bass**

| • Press to enter bass level setting.
• Press this button to set the bass, then press the buttons to adjust the bass level.
**10**|

**Treble**

| • Press to enter treble level setting.
• Press to set the treble, then press the buttons to adjust the treble level.
11|

Dimmer

| Switch the brightness on/off.
12|

EQ

| Switch between MUSIC and MOVIE sound modes.
13|

Surround

| Activate/deactivate the Dolby Surround effect.

OPERATION

Wall Mounting
WARNING: If you are not completely confident in wall mounting this product, consult a licensed trade professional before installation. It is extremely important that this product is installed correctly. If mounting is not carried out in the correct manner, there is a high risk of injury and/or damage to your TV and/or other objects.

1. Use a pencil to make drill hole marks on the wall for the anchors. Ensure the marks are level before drilling. Use a 6mm bit and power drill (not supplied) to drill holes on the marks.
   

2. Insert plastic anchors into the holes and push them in until they are flush with the wall. Drive the screws into the plastic anchors and tighten until the screw head is approximately 3mm from the wall.
   

3. Slide the soundbar onto the screws which are fixed to the wall. Ensure the  soundbar is secure and attached firmlyto the wall.

Insert/Replace Batteries in the Remote Control

1.  Open the battery compartment on the underside of the remote control.
2.  Insert x2 AAA/R03 1.5V batteries (not provided). Pay attention to the correct polarity (see inside the battery compartment).
3.  Close the battery compartment.

Note:
If the remote control is not going to be used for a long period of time (more than a month), remove the battery.

Power On/Standby
Note:
Before connecting to power, ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the soundbar.

1. Insert the DC end of the AC-DC power adaptor into the DC IN port on the bottom of the soundbar, then connect the AC-DC adapter to an electrical outlet.
2.  Press and hold the / SOURCE button on the soundbar or press the button on the remote control to switch the sound bar on. The last used mode will illuminate on the display.
3.  Press and hold the / SOURCE button on the soundbar or press the button on the remote control to turn off the soundbar and enter standby mode.

Select an Input Mode
Press the MODE button on the remote control, or the SOURCE button on the soundbar repeatedly to cycle through the different modes: HDMI ARC mode, Bluetooth mode, USB mode, Aux-in mode, Optical input mode and Coaxial input mode.

Pair the Soundbar

1. Ensure that Bluetooth is activated in your device (e.g. mobile phone).

2.  Power on the soundbar. Press the SOURCE button on the soundbar or the MODE button on the remote control to select Bluetooth mode. ‘BT’ will flash on the display to indicate that pairing mode is activated.

3. In your device’s Bluetooth settings, search for ‘Kogan 2.1 Soundbar’ in the list of discovered devices.
   Notes:
   • Only one device can be paired to the soundbar. If the soundbar is already paired to another device, it will not appear in the Bluetooth device list.
   • The Bluetooth radius of this soundbar is limited to approximately 10m depending on the surroundings.

4. If you are prompted to enter a password, enter ‘0000’ and press ‘OK’. When pairing is successful, the soundbar will play an audio tone and ‘BT’ will illuminate solidly on the display.

5. After pairing is successful, you can listen to music wirelessly through Bluetooth and select music on the Bluetooth device.

6.  Press the buttons on the remote control or ‘+’ / ‘-’ buttons on the soundbar to increase/decrease the volume.

7. To unpair the soundbar from your device, switch to another input source on the soundbar or unpair the soundbar from your Bluetooth device to re-enter pairing mode.

Notes:

• If a paired device receives a call when paired to the soundbar, the music will be paused. The call will not be played through the soundbar. When the call has ended, playback will continue.
• The soundbar will unpair from your device if the device is moved beyond the Bluetooth range (10m). Place the device within the Bluetooth range to reconnect the device to the soundbar.
• If the device is moved beyond the Bluetooth range, when it is brought back, check if the device is still paired to the soundbar. If the connection is lost, follow the instructions above to pair your device to the soundbar again.

Optical/Coaxial (Digital Inputs)

1. Ensure that the soundbar is connected to the TV or another audio device via Optical cable (provided) or Coaxial cable (not provided).
2. Power on the soundbar. Press the SOURCE button on the soundbar or press the MODE button on remote control to select OPTICAL or COAXIAL mode.
3. Operate your audio device directly for playback features.
4.  Press the  buttons on the remote control or ‘+’ / ‘-’ buttons on the soundbar to increase/decrease the volume.

Note:
If there is no sound coming from the soundbar and the input mode flashes rapidly on the display, ensure the audio (digital output) setting of your device (e.g. TV, DVD player, game player) is set to PCM.

3.5mm Aux Input

1. Connect one end of a 3.5mm audio cable (not provided) to the soundbar and the other end to a TV or other audio device.
2. Power on the soundbar. Press the SOURCE button on the soundbar or the MODE button on the remote control to select AUX input mode.
3. Operate your audio device directly for playback features.

USB Playback

1. Press the MODE button on the remote control, or the SOURCE button on the soundbar repeatedly to select and enter USB mode.
2. Press the ‘ ’ or ‘ ’ button on the remote control to skip to the previous or next track.

Notes:

• Always directly insert the USB into the USB port to prevent any malfunctions.
• USB output: DC 5V, 200mA (for playback only, not for charging external devices).

CONNECTIVITY

Connect to TV through HDMI (ARC)

• An HDMI connection supports digital audio and is recommended to connect the soundbar to your TV.
• If your TV supports HDMI ARC, you can connect to the soundbar using a single HDMI cable.

Notes:
Ensure that the HDMI CEC function on your TV is turned on and the TV output is set to PCM.
Connecting an External Device Using 3.5mm Audio (Analog) Cable or Coaxial/Optical (Digital) Cable

• Not all TVs have the audio outputs shown below. To connect the soundbar directly to your other devices (Blu-ray player, gaming system, etc.) see the device’s user guide.
• When using either of the digital inputs, if the input mode is flashing rapidly on the display:
  • Ensure that the Optical cable or Coaxial cable is properly connected.
  • Try setting the TV output to PCM.

SPECIFICATIONS

Power Adapter (Provided)

Input| AC 100 – 240V~50/60Hz
Output| DC 20V/1.8A
Power of Remote Control| 2 x AAA/R03 batteries (not provided)
Remote Control Distance| Up to 6m (angle≤30°)
Output Power| 25W x 2 + 50W
Mid-High Range Speaker| 2 x 2.5″ 6Ohm 30W
Woofer Speaker| 2 x 2.5” 8 Ohm 30W
Frequency Response| 50Hz – 17KHz
Soundbar Dimension| 855 x 65 x 84mm
Net Weight| Approx. 2.5kg
Bluetooth
Bluetooth support| V5.3
Range| Up to 10m
Transmission frequency| 2.4 GHz
Protocols| A2DP 1.2

TROUBLESHOOTING

the power plug to the electrical outlet.
The electrical outlet is not working.| Change to another outlet.
Remote control does not work.| Batteries are dead.| Replace the batteries.
Incorrect polarity.| Re install the battery according to the correct polarity.
Too far from the soundbar.| Reduce the distance.
No sound.| The wrong input source is selected.| Select the correct input source.
Sound is distorted.| Volume is too high.| Decrease the volume.
Soundbar gets warm after extended use at a high volume.| This is normal.| Turn the soundbar off for a period or lower volume.
Soundbar cannot be
paired via Bluetooth.| Bluetooth is switched off on the device.| Switch on Bluetooth.
The soundbar is already paired with another device via Bluetooth.| Press and hold the

SOURCE button on the remote control for 3

seconds to unpair the

device and re-enter pairing mode.

No sound when playing audio via Bluetooth.| Your Bluetooth device has not been paired.| Pair your device to the soundbar.
The volume of your

Bluetooth device is set too low.

| Increase the volume of your Bluetooth device.
The soundbar volume is too low.| Increase the soundbar volume.
Poor sound quality from a Bluetooth device.| Bluetooth device is almost out of range of the soundbar.| Move your Bluetooth device closer to the soundbar.

NOTES

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>