kogan NSDIYTOOLSA Kids DIY Tool Bench Station Playset User Guide
- July 9, 2024
- Kogan
Table of Contents
kogan NSDIYTOOLSA Kids DIY Tool Bench Station Playset
Specifications
- Product Name: KIDS DIY TOOL BENCH STATION PLAYSET
- Model Number: NSDIYTOOLSA
- Recommended Age: Not suitable for children under the age of 3
- Components: A, B, C, D, E, F, G, H, I, J, K, L, M (x2), Q, U (x6), N (x2), R, V (x14), O, S (x6), W (x3), P, T (x16)
Product Usage Instructions
Assembly:
- Open the tool bench and remove the x4 legs (C).
- Reposition the tool bench so the holes for the vice (B) are on the lower left side.
- Insert the legs (C) into the tool bench.
- Secure the x2 long cross braces (D) and the x2 short cross braces (E) to the legs (C) using x8 nuts (T) and x8 screws (V).
- Secure the vice (B) to the tool bench using x4 screws (U).
Operation:
Using the Drill:
- Open the battery compartment.
- Insert x2 AA 1.5V batteries according to the correct polarity.
- Close the battery compartment.
- Secure the drill attachments to the drill.
Notes:
If you need more information or assistance beyond this user guide, visit
help.kogan.com for the most up-to-date guide andsupport.
FAQ
-
Is this product safe for children under 3 years old?
No, this product contains small parts and is not suitable for children under the age of 3. Please ensure proper supervision when children are playing with this toy. -
How can I dispose of this product responsibly?
This product should not be disposed of with other household wastes. Please recycle it responsibly to promote sustainable reuse of material resources and prevent harm to the environment.
SAFETY & WARNINGS
WARNING: CHOKING HAZARD.
This product contains small parts and is not suitable for children under the
age of 3. Keep new and used batteries away from children. If you think
batteries might have been swallowed or placed inside any part of the body,
seek immediate medical attention.
- Dispose of used batteries immediately according to local laws and regulations.
- Batteries are to be inserted with the correct polarity.
- Do not mix different types of batteries or new and used batteries.
- Remove the batteries from the product when not in use for an extended time, or when the batteries become exhausted.
- Battery installation must be performed by an adult.
- Do not dispose of batteries in fire.
Disposal
This marking indicates that this appliance should not be disposed with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
COMPONENTS
ASSEMBLY
- Open the tool bench and remove the x4 legs (C).
- Reposition the tool bench so the holes for the vice (B) are on the lower left side.
- Insert the legs (C) into the tool bench.
- Secure the x2 long cross braces (D) and the x2 short cross braces (E) to the legs (C) using x8 nuts (T) and x8 screws (V).
- Secure the vice (B) to the tool bench using x4 screws (U).
OPERATION
Using the Drill
- Open the battery compartment.
- Insert x2 AA 1.5V batteries according to the correct polarity.
- Close the battery compartment.
- Secure the drill attachments to the drill.
Need more information?
- We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>