kogan NBDIGTRVSCA 2 Pack Portable Digital Luggage Scale User Guide
- July 9, 2024
- Kogan
Table of Contents
kogan NBDIGTRVSCA 2 Pack Portable Digital Luggage Scale
Specifications
- Capacity: 50kg
- Unit: kg/lb (switchable)
- Power: 1 lithium battery (CR2032)
Product Usage Instructions
Safety & Warnings
Before using the portable digital luggage scale, please read and understand all safety and warning instructions provided in the user manual.
Operation
- Press the power button to turn on the scale.
- Select the desired unit (kg or lb) by pressing the unit button.
- Hang the luggage on the scale using the attached strap.
- Wait for the weight to stabilize and be displayed on the screen.
- If the weight exceeds 50kg, the screen will display ‘Err’ indicating an overload.
FAQ
Q: What should I do if the scale displays ‘Err’?
A: If the scale displays ‘Err’, it means the weight exceeds the maximum capacity of 50kg. Remove some items from your luggage and weigh them again.
Q: How do I switch between kg and lb units?
A: Press the unit button on the scale to toggle between kilograms and pounds.
SAFETY & WARNINGS
- Do not use this scale in wet conditions, near sources of heat, or open flames.
- This scale is not for commercial use.
OPERATION
Power
- Remove the insulation plastic sheet from the battery door and install x1 CR2032 lithium battery.
- Replace the battery when ‘L0’ is displayed on the screen, as this indicates the battery is low.
How to Use
- Press the ‘Power’ button to turn on the scale. ‘0.00’ will display on the screen after a few seconds, indicating it is ready to weigh. Place an item on the scale to see its weight.
- To change the unit of measurement, press the ‘Power’ button to turn on the scale, wait for ‘0.00’ to display, then press the ‘Set’ button. The default weighing unit of this product is kilograms (kg) when sold. The unit displayed when the scale is powered off will be set as the default unit for the next startup.
- Press the ‘Power’ button for 3 seconds to turn off the scale, or it will automatically power off if there is no operation for 5 minutes.
Auto-lock Function
- This scale has an auto-lock function. When ‘H’ is displayed on the screen, it means the reading is locked.
- When the reading is locked, press the ‘Power’ button to zero the scale. The tare function is now active.
Overload Display
The maximum weight for this scale is 50kg. In case of overload, the screen will display ‘Err’.
SPECIFICATIONS
- Capacity 50kg/10g
- Unit kg/lb (switchable)
- Power 1 lithium battery (CR2032)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>