KOGAN KABLFAN5CCA Smarterhome Bladeless Purifier Fan User Guide

KOGAN KABLFAN5CCA Smarterhome Bladeless Purifier

Product Information

Specifications

• Product Name: Kogan SmarterHome Bladeless Purifier Fan with HEPA13 Filter
• Model Number: KABLFAN5CCA
• Filter Type: HEPA13
• Control: Remote Control and App Control
• Features: Air purification, Multiple air modes, Timer function, Smart home integration

Product Usage Instructions

Assembly

Step 1: Install the Legs

1. Place the main body on a steady surface.
2. Insert the power supply leg into the rear hole and press down to secure.
3. Install the remaining two legs in the same manner.

Step 2: Install the Air Outlet Ring

1. Place the fan on a stable surface.
2. Attach the air outlet ring to the main body.
3. Secure the ring by tightening the screw at the bottom using the Allen key driver.

Installing the Air Filter

1. Remove the air filter cover by rotating it counterclockwise.
2. Insert the air filter into the main body.
3. Secure the cover by rotating it clockwise.

Operation

Power Connection
Insert the power plug into a mains outlet matching the voltage specifications. The fan will beep once to indicate it is connected.

Fan Control

• Power: Press to turn on/off the fan.
• Air Mode: Switch between four airflow styles by pressing the Air Mode button.

FAQs

• Q: How often should I clean the air filter?
  

  • A: The fan has a filter cleaning reminder that turns on after 720 hours of operation. Follow instructions in the Care and Maintenance section to clean the filter when prompted.

• Q: How do I connect the fan to the SmarterHome App?
  

  • A: Refer to the “Connect to SmarterHome App” section in the user manual for detailed instructions on connecting the fan to the app.

KOGAN SMARTERHOME
BLADELESS PURIFIER FAN
WITH HEPA13 FILTER
KABLFAN5CCA

SAFETY & WARNINGS

Important Safeguards
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury:

For your safety

• Read all instructions carefully, even if you are familiar with the appliance. Retain this user guide for future reference.
• This product is intended for general domestic use only. Do not use the product for any other purpose.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not leave the product unattended while it is in use, especially when children are present.
• Always unplug the product from the electrical outlet when it is not in use.
• Always operate the product on a flat, level, steady, and stable surface to avoid it overturning.
• Do not hang or wall-mount the product.
• Do not place the product in or near an open window. Rain, snow, and other weather elements may create an electrical hazard.
• Keep the power cord and product away from heated surfaces.
• Always unplug the product from the electrical outlet when cleaning it.
• Do not plug or unplug the product into or from the electrical outlet with wet hands.
• Never drop or insert objects into any opening of the product.
• Do not attempt to open any part of the motor housing, as there is a risk of electrical shock.
• Do not allow the power cord to hang over the edge of a table or counter where it may be tripped over or pulled.
• Do not operate the product if the power cord is cut, damaged, or if the wires are exposed.
• Do not immerse or expose the motor housing, power cord, or plug to water or other liquids.
• Do not put any stress on the power cord where it connects to the product, as the power cord could fray and break.
• Only use the adaptor supplied with the product.
• Do not operate the product if it has a damaged power cord or plug, malfunctions, or is dropped or damaged. Do not attempt to examine or repair this product yourself. Qualified service personnel should perform any servicing.
• This product is intended for indoor, non-commercial, non-industrial, household use only. Do not use outdoors.
• To disconnect the product, set the main switch to OFF and then remove the plug from the outlet. Do not pull on the power cord when disconnecting.
• Ensure that the product is switched OFF and unplugged from the supply mains before cleaning and maintenance.
• Do not move the product when it is in use.
• Do not run the power cord under carpeting or cover the power cord with throw rugs, runners, or similar items. Arrange the power cord away from traffic areas where it will not be tripped over.
• Do not use this product with a programmer, timer, or any other device that switches the product on automatically, as a fire risk exists if the product is covered or positioned incorrectly.
• Do not place any objects on or cover the air inlet or outlet. Make sure that the ventilation openings are free of dust, lint, hair, or any other obstacles that could impair airflow.
• The appliance is designed to function quietly and safely under normal circumstances.

Warning

• Do not place the appliance near any power board or socket outlet.
• If the supply power cord is damaged, it must be replaced by Kogan.com its service agent, or similarly qualified persons to avoid a hazard.
• This product has not been designed for any uses other than those specified in this booklet.

COMPONENTS

OVERVIEW

Control panel and display

Remote Control

ASSEMBLY

Step 1: Install the legs

1. Place the main body on the packing foam in a steady position.
2. Insert the power supply leg into the rear hole position by pressing down the spring-loaded ball on the pillar and inserting it into the power supply hole. The spring-loaded ball will spring up in the hole and fix the pillar in place.
3. Install the two remaining legs in the same way.

Step 2: Install the air outlet ring

1. Place the fan in an upright position on a flat and stable surface.
2. Install the air outlet ring onto the main body.
3. Secure the outlet ring in place by inserting the supplier screw into the hole at the bottom of the ring. Use the Allen key driver to tighten the fan air outlet ring screw by turning it clockwise.

Installing the air filter
This product is equipped with an air filter that can purify the air. The filter must be installed into the main body before use.

1. Rotate the air filter cover counterclockwise to remove the cover.
2. Insert the air filter into the main body.
3. Replace the cover and rotate it clock- wise to secure it.

Filter cleaning reminder
The fan has a filter cleaning reminder function. After 720 hours of operation, the cleaning indicator on the display will turn on.
Turn OFF the fan and follow instructions in the Care and Maintenance section to clean the air filter.
After cleaning the filter, long-press the ON/ OFF button for 5 seconds to reset the reminder and the running time will be accumulated from zero again.

OPERATION

Usage Instructions

1. When using the fan, make sure that it is on a flat and stable surface. Damage may occur if it is placed on an incline or decline. Do not block the air inlet and outlet. Also, ensure that there is no obstacle within 30 cm in front of the air outlet to avoid weakening the air circulation effect.
2. Adjust the air supply direction. Gently press forward or backward on the top part of the air outlet ring. The ring can be adjusted to direct the airflow upward or downward.

Power Connection
Insert the plug into a mains power outlet. Ensure that the voltage on the specifications plate matches the voltage in your home. The fan will beep once, indicating that it is connected to the power supply and is in standby mode.

Fan Control

Power
When the fan is on standby mode, press the power button to turn on the fan in normal mode at the default fan speed. When the fan is in operation, press the ON/OFF button again to turn it off.
Air mode
Press the Air Mode button to switch between four airflow styles. The indicator of the current mode will light up.
Automatic mode
The fan automatically adjusts the airflow speed according to the real-time detected PM2.5 levels.

Hi-speed mode
The airflow speed is set to the highest level.

Sleep mode
The airflow speed and noise are reduced to the lowest level.

Natural mode
The airflow speed switches between levels 3, 4, and 5 in turn. Pressing the button again when the fan is in Natural mode will cancel any mode setting. You can also press the Air Speed button to exit the current mode.

Timer
A timer can be set to automatically turn off the fan. The timer can be set up to 8 hours in 1-hour intervals (0-1-2…8). Adjust the timer setting by repeatedly pressing the Timer button. The current timer setting will be displayed. Each press increases the timer by 1 hour; at the timer setting of 8 hours, pressing once will return the setting to 0. When the fan is turned off, the timer setting is cancelled.

Swing
Press this button to set the horizontal oscillation angle. There are four angle options: 30°, 60°, 90°, and 120°. The current oscillation angle will be displayed. A fifth press will stop the oscillation.
Press this button to cycle through 9 air- flow speed levels from 1 to 9. Press and hold this button for 2 seconds to enter the strong mode which keeps the airflow speed at the highest level.

Remote Control Operation

Power
When the fan button is in standby mode, press the Power button to turn ON the fan in normal mode at the default fan speed. When the fan is in operation, press the Power button again to turn it OFF.

Air mode
Press the Air Mode button to cycle through four airflow styles: “Automatic,” “Strong,” “Sleep,” and “Natural.” Pressing again when the fan is in “Natural” mode will cancel any mode setting. The mode setting will also be cancelled if the air speed is adjusted.

Swing ON/OFF
Press this button to turn the horizontal oscillation of the fan on or off.

Swing angle
When the fan oscillation is on, press this button to switch between the four horizontal angles: 30°, 60°, 90°, and 120°. The current oscillation angle will be displayed. Note that there will be no response if the fan oscillation is off.

Air speed +/-
Press the +/- button to increase or decrease the airflow speed. There are 9 speed levels.

Sound ON/OFF
Press this button to turn the button pressing beep sound on or off.

Display ON/OFF
Press this button to turn the display screen light on or off. When the screen light is off, only the PM2.5 level and power ON/OFF button will be displayed.

UV Lights
Press this button to turn the UV lights on or off. The UV lights will automatically turn off after 1 hour.

Plasma
Press this button to turn the plasma function on or off. The plasma function generates ions that attach to airborne particles, clumping them together for easier filtration while also neutralizing bacteria, viruses, and odours to improve overall air quality.

Light
Press this button to turn the atmosphere night light on or off.
Using the Remote Control to Operate the Bladeless Fan

1. For the best results, aim the remote control at the fan’s display screen.
2. Do not put any objects between the remote control and the appliance while operating it.
3. Operate the remote control within 5 meters from the unit and within a range of 45 degrees towards the appliance.

Battery installations

1. Open the battery compartment at the back of the remote control.
2. Insert x2 new AAA 1.5V alkaline batteries, aligning with the polarity indicator markings (+/-) inside the battery compartment.
3. Slide back the battery cover, making sure the locking tabs click into place.

Note
Make sure the batteries are installed correctly in the remote control by aligning the +/- polarity marking in the battery compartment with the batteries.

Warnings

• Keep batteries out of children’s reach.
• Use only alkaline batteries. Do not use rechargeable batteries.
• Do not use old and new or different types of batteries in combination. Do not use the remote if the batteries have leaked.
• Remove the batteries if they are discharged or if the remote control is not being used for a long period of time. Dispose of used batteries immediately.
• Batteries must be recycled or disposed of properly. Do not dispose of batteries in a fire, oven, or near any flammable objects as this may cause an explosion. Do not dispose of batteries in regular trash, municipal waste stream, or by fire as batteries may leak or explode.

CONNECT TO SMARTERHOMETM APP

Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS)

To register

1. If you already have a SmarterHome account, select ‘Log In’. To register a new account, select ‘Sign Up’.
2. The system will automatically recognise your country. If needed, you can manually select your country from the drop-down box. Enter your email address and tap Get Verification Code to continue.
3. A 6-digit code will be sent to the submitted email address. Enter this code before the one-minute timer expires.
4. Continue to the next page and complete your SmarterHome profile.

Set device in pairing mode
When the fan is first turned on, it may automatically enter pairing mode (the Wi-Fi light will be flashing).

If not automatically in pairing mode when powered on, you can manually set the fan in pairing mode by pressing and holding the Power button on the fan for 5 seconds until the Wi-Fi indicator light begins flashing.

Add device through network

1. Ensure your Phone’s Bluetooth is enabled. Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper right corner, to add a new device through the network.
2. The app will begin searching for nearby devices, when the fan is discovered, tap QSG Design
3. Enter your Wi-Fi details. It is important that your SmarterHome device and the app are connected to the same Wi-Fi network during setup. Notes
   • The device and the app have to use the same Wi-Fi network.
   • The device is only compatible with 2.4Ghz networks.
   • Depending on the product, Steps 3 and 4 may be in opposite order.
4. Ensure that the device is in pairing mode, with the Wi-Fi indicator light flashing,
5. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome device are kept close until connection is complete.
6. After successfully being added, you will have the option to rename the device and listing to enter its control page.

Note : Once connected, you can select Create Scene from the “+” in the upper right corner (or from the Scene tab) to group connected SmarterHome ™ products and automate their functions.

GOOGLE HOME CONTROL

Note
You will need to have set up a Google Home account prior to linking your Kogan SmarterHome device.

Adding “SmarterHome” to the Google Home app

1. From the home page of the Google Home app, select the “+” icon (top left corner, see arrow in the below screenshot) to access the ‘Add and manage’ page.
2. Select ‘Set up device’, then select the Works with Google’ option.
3. Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
4. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
5. Select “Kogan SmarterHome™” from the app options.
6. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices.
7. Once connected, the app will display any compatible devices linked to your SmarterHome™ account. From here you can assign them to rooms and set up any routines. Tap on any of the devices to view a list of available commands.

Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.

AMAZON ALEXA CONTROL

Note
You Will Need to have  set up on Alexa account prior to linking your kogan MSmartHome device

Adding “SmarterHome” to the Alexa app

1. From the home page of the Alexa app, select the “-” icon in the bottom-right and select “Skills & Games” from the sidebar.
2. Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome ™ skill.
3. Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
4. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
5. Select “Kogan SmarterHome™” from the app options.

CLEANING & CARE

Before cleaning the fan, you must switch it OFF using the Power button and disconnect it from the power outlet.

If there is oil or dirt on the fan’s main body, it must be cleaned to prevent discoloration and damage.

To clean the exterior surfaces, simply wipe them with a soft damp cloth. If necessary, greasy marks can be removed using mild soap and a cloth dampened in hot water. Avoid all types of harsh detergents, cleaners, or solvents that may contain chemicals, as these could damage parts of the product. Thoroughly dry all parts before storage or further use.

Do not wash any part of the product directly with water. Do not allow water or any kind of liquid into the fan’s main body.

Cleaning the Air Filter
To clean the filter, use a vacuum cleaner with a soft brush attachment. Gently run the brush across the filter to loosen any built-up dirt.
The air filter should not be washed with water or any other liquid to avoid damage.

SPECIFICATIONS

AC Adapter Input voltage| 100-240V AC,

50/60Hz 1.0Amax

---|---
Output voltage| 24V DC, 1.5A
Fan power| 35W

TROUBLESHOOTING

• The power cable is not plugged in or doesn’t connect well.
• The main body is damaged.

|

• Plug in the power supply cable and ensure that the connection is stable.
• Contant help.Kogan.com for support.

The fan can’t be turned OFF.| The main body is damaged.| Contact help.Kogan.com for support.
The remote control doesn’t work.|

• The batteries are flat.
• The battery orientation is wrong.
• The remote control is not screen.

|

• Replace the batteries.
• Reinstall the batteries in the correct location.
• Point the remote control at the fan’s display screen.

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>