AVIANCE HD58880 1 Light Brushed Nickel Cast Brass Hardwired Outdoor Instruction Manual

: July 3, 2024
: AVIANCE

Table of Contents

AVIANCE HD58880 1 Light Brushed Nickel Cast Brass Hardwired Outdoor
Product Information
Product Usage Instructions
ASSEMBLING THE FIXTURE
CONNECTING THE WIRES
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AVIANCE HD58880 1 Light Brushed Nickel Cast Brass Hardwired Outdoor

Product Information

Specifications

Model: HD58880
Power: Requires connection to house electrical system
Bulb Type: Not Included
Maximum Wattage: Refer to fixture’s specifications
Grounding: Required for safety

Product Usage Instructions

Assembling the Fixture

Shut off power at the circuit breaker and remove the old fixture.
Unpack the new fixture and lay out all parts, ensuring not to lose any small pieces.
Discharge the knob screws and shade of the lamp body.
Install the light bulb according to the fixture’s specifications without exceeding the maximum wattage rating.
Raise the lamp holder insert to the shade, aligning the holes, and secure it with the knob screw.
Attach the lamp body assembly onto the post and secure it with screws.

Connecting the Wires

Connect black fixture wire to black house wire (hot) and white fixture wire to white house wire (neutral).
Ensure all wire nuts are secured and wrap connections with electrical tape if needed.
If there is a ground wire in the outlet box, connect the fixture’s ground wire to it; otherwise, attach it to the green ground screw on the mounting plate.
Tuck wire connections neatly into the post.

Your installation is now complete. Restore power to the junction box and test the fixture.

Thank you for choosing AVIANCE product. For further assistance with parts or assembly, please contact customer service at info@aviancelighting.net.

FAQ

Q: What should I do if I exceed the maximum wattage rating for the light bulb?
A: It is crucial not to exceed the maximum wattage rating specified for the fixture as it may lead to overheating or other hazards. Please use a bulb within the recommended wattage range.
Q: How do I know which wires to connect during installation?
A: Connect the black fixture wire to the black house wire (hot), the white fixture wire to the white house wire (neutral), and the ground wires accordingly. Ensure all connections are secure before restoring power.

ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product.
HD58880

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
Thank you for purchasing an AVIANCE product.

ASSEMBLING THE FIXTURE

Shut off the power at the circuit breaker and remove old fixture, including the single bar.
Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
NOTE : Discharge the knob screws(C) and shade(A) of the lamp body.
Install the light bulb(not included) by the fixture’s specifications. NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
Raise the lamp holder(B) insert to the shade(A), aligning the side hole with the shade’s screw hole, then lock it securely with the knob screw (C).
Attach the assembly lamp body onto the post (not included) and lock it securely with the screws(D).

CONNECTING THE WIRES

Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
Tuck the wire connections neatly into the post.

Your installation is now complete. Return power to the junction box and test the fixture.