coccolle Nessia Multifunctional Travel Baby Stroller User Guide
- June 12, 2024
- coccolle
Table of Contents
Nessia Multifunctional Travel Baby Stroller
User Guide
Nessia Multifunctional Travel Baby Stroller
the images shown in this instructions manual have illustrative purpose. The
product purchased by you may look different. Coccolle Nessia
multifunctional 3in1 stroller
IMPORTANT! Please read these instructions carefully and keep the manual
for future reference!
Safety warnings
- Always lock the brake when put or carry a child.
- Never leave the child unattended. Leaving the baby without care may cause a danger.
- Always use the safety belts when the baby begins sitting.
- Do not use an additional mattress in the product.
- Before use make sure that the assembling mechanisms are blocked
- Always use the crotch belt together with the waist belt.
- Every load hanging on the handles of the stroller affects its stability.
- This product is not designated to go roller blading with it or to jog, run or perform other physical exercises.
- This stroller is designed to carry only one baby at a time.
- The carrycot of this stroller is designed for babies age 0-6 months up to 9 kg who cannot sit up unaided. The seat unit is designed for children 6-36 months and up to 22 kg, whichever comes first!
- Do not leave the stroller with a baby in a slope, even if the brake is locked.
- Do not use the stroller if any component is damaged.
- During the assembly and disassembly of the stroller, make e sure that the baby is at a safe distance and cannot be hurt by the movements you perform.
- When making any adjustments, make sure that the movable parts are not close to the baby’s body.
- Always lock the brake when the stroller is not being pushed.
- The maximum load of basket is 3 kg. the maximum load of bag is 2 kg
- Every bag or other load hanging on the handle affects its stability.
- Please only use original parts, confirmed by the manufacturer or the importer should be used on this product.
- In case you’re pushing the stroller on the pavement or on steps, please lift the front axle.
- It’s forbidden to use the stroller on the stairs.
- Please keep away the stroller from babies. This is not a toy.
Warranty conditions
-
The warranty does not cover:
– Damage occurred for reasons attributable to the user.
– Damage occurred as a result of failure to use the product according to recommendations, warnings and restrictions found in the user manual and on product elements.
– Consumables subject to natural wear and tear during normal usage such as: tyres, inner tubes, tread, materials used on handles, structure and colour of fabrics and materials subject to friction, sleeves in wheels, axels, prints.
– Damage occurred as a result of failure to observe maintenance guidelines such as: corrosion, changed upholstery or plastic elements colour as a result of prolonged exposure to sunlight, damage to plastic elements of upholstery as a result of prolonged exposure to sunlight or excessive temperatures, excessive play, squeaking / creaking noises, damage to mechanism due to over- load.
– Damage occurred due to repairs being carried out by unauthorised personnel. Single wheels being pushed into a vertical position as a result of loading (this is normal).
– Damage and soiling occurred due to the product being incorrectly packaged for shipping (courier online purchases). -
The repair method is determined by the manufacturer/warranty service provider.
-
The product subject to a complaint should be provided clean.
-
The consumer goods warranty does not exclude or suspend the purchaser’s rights stemming from goods noncompliance with the agreement.
Assembly and use instructions
-
Opening the stroller:
1a. Unlock the stroller as the arrow indicates;
1b. Pull out and pull up the handle;
1c. Press the button on the handle with your finger at the same time pull up the handle;
1d. When the stroller is opened as you see in picture 1d, you should hear “click” sounds on both side of the stroller, please examine if the stroller is locked in safety position before you use it. -
Assembly and disassembly of the REAR WHEELS:
2a.To assemble the rear wheels: Take one of the rear wheels, insert the rear axle into the plastic hole as picture 2a shows, until it is locked, then install the other wheel in the same way.
2b.To disassemble the rear wheels: Pull the rear wheel express button as the arrow shows, remove the rear wheel in the direction of the arrow then finish disassembling.
2c. Step down the brake pedal to activate the brake of the stroller, lift up the pedal to release the brake as shown in picture 2c.
Always lock the brake when put in or take out the child! -
Assembly and disassembly of the FRONT WHEELS:
3a. To assemble the front wheels: Take one of the front wheels, insert the vertical shaft into the plastic hole on the wheel hole as shown in picture 3a, until it is locked, then install the other front wheel in the same way.
3b. To disassemble the front wheels: press the small metal pins as the arrow shows, at the same time use your hand to pull out the front wheel as arrow shows to finish disassemble
3c. The front wheels have 360 degrees rotation: Lift up the plastic button on the front wheels to lock to not rotate, press down the plastic button to release it so it can rotated at 360degree as the arrow in the pic 3c. -
Adjustement of the backrest
4a-4b. Lift up the button as the arrow in pic 4a to adjust the backrest in one of the three positions.
4b. Adjust the height of the canopy and head rest.
4c-4d. Press the button at the back side of the back rest to adjust the height of the canopy and head rest, the height can be adjusted in 3 different positions. -
The assembly of the canopy and the bumper bar
5a-5b. Insert the canopy’s plastic sides into the seat as pictured in 5a. 5c.
Assemble the bumper bar by inserting it on both sides of the seat as picture 5c.
Note: please make sure to lock the bumper in locked in place, you need to hear the “click” sound. -
Assembly of the seat
Pull up the lever on the top of the seat back to open or fold the seat.
6a. Fold/ unfold and put it in the desired position by putting it down in direction the arrow indicates. Please make sure to lock the seat in place the secure lock is when you hear the “click” sound.
6b. Press the unlock button on both sides of the seat and, at the same time pull up the seat to take off the frame.
6c. Pull out the button and lift up the seat as the arrow indicates in picture 6c, then assemble the seat in opposite direction as in picture 6c, insert it into the to finish assembly. -
Opening and folding the canopy
7a. Extend or fold the canopy as shown in pictures 7a-7b -
Rotating the bumper and using the telescopic handle
8a. Unlock and pull out one side of the bumper to rotate the bumper in 360 degrees
8b. In order to adjust the height of the handle press the button as the arrow shows in picture 8b. -
Adjustment of the footrest
9a. Press the button as the arrow in the picture 9a shows to adjust the footrest in 3 positions
9b. The Footrest’s length is adjustable: adjust the foot rest by pushing the button under the foot rest as pic 9b, press the button down at the same time pull the foot rest, then the foot rest become longer. To shorten the length, press the button down at the same time push the foot rest and the foot rest becomes shorter. The length of the footrest cannot be shortened if first it hasn’t been adjusted to a longer length. -
Folding the stroller:
10a. Fold the seat.
10b. Press the second lock and at the same time press the handle adjustment button, then push down the handle with some strength to unlock the stroller.
10c-10d. Press the handle adjustment button to let the handle descend, now the stroller is folded and locked once you hear a “click” sound. The stroller can stand after folding. -
Folding the stroller with the seat facing the parent
11a. Fix the seat unit facing to the parent with the backrest in the highest position.
11b. Fold the legrest towards the backrest.
11c. Fold the backrest and legrest in horizontal position, meaning with the backrest is the lowest position.
11d. Adjust the length of the handlebar to the lowest positon, then press the folding second lock at the same time you are pushing the telescopic handle slightly to unlock the frame.
11e. The handle will fall down automatically, when the handle falls to the lowest position you can hear “click” sound and this means the frame is fully folded and locked.
11f. After folding, the stroller can stand. -
Usage of the safety belt:
Picture 12 illustrates the way of inserting the tongues of the belt into the central buckle.
12a. Click the buckle to lock the safety belt on both sides as picture 12 shows.
Press the middle button to release the safety button. You can adjust the length of the seat belt by pulling the safety buckle on both sides as needed. -
Assembly of the carrycot
13a-13b. In order to unfold the carrycot body, remove the bedding and the mattress, then squeeze the metal tensioners on the bottom plate of the carrycot in the direction of the arrows (picture 13a-13b), until it locks in the special holders. You should hear a “click”sound locking the tensioner in the holder.
The carrycot is equipped with memory buttons which means it’s not mandatory to press down the buttons to remove the carrycot from the frame simultaneously.
You can either press down the memory button on both sides or you can press down the memory button one by one and pull up the carrycot when taking it off.
NOTE! The carrycot is designed for children up to 6 months old weighing up to 9 kg, who cannot sit, kneel or trundle unaided. Stop using the carrycot if your child starts sitting kneeling or trundling by itself.
WARNING: Do not use an additional mattress of thickness of more than 15mm.
The carrycot’s canopy has 4 levels of adjustment. In order to adjust it, press simultaneously the buttons located at the base of the carrying handle and adjust the desire position.
NOTE! The external canopy cannot be used as the carrying handle. The carry handle is integrated in the carrycot.
NOTE! Make sure that the carrying handle is locked in the correct position before moving the carrycot. -
Fixing on the car seat on the frame
14a.Take the car seat adaptor and fix it on the frame, until you hear a slightly “click” which means the adaptor is rightly fixed on the frame.
14b. Align the car seat hole to the car seat adaptor, then push the car seat slightly down till you hear a “click” which means the car seat has been fixed on the frame.