rizoma CT462B Kit Montaggio Serbatoio Fluido Freno Anteriore User Manual
- June 1, 2024
- rizoma
Table of Contents
rizoma CT462B Kit Montaggio Serbatoio Fluido Freno Anteriore
Product Information
Specifications
- Product Name : Rizoma
- Model: Welcome to Rizoma
- User Manual Revision: 00
Product Usage Instructions
Installation Guidelines
- Read and follow the instructions carefully as they are essential for the product.
- Ensure all fastenings are done after correct accessory positioning without forcing movable parts.
- Verify compatibility with your motorcycle and other aftermarket accessories before installation.
Post-Installation Checks
After installing a Rizoma product, make sure to check all related components of the motorbike such as brakes, throttle, clutch, lights, and steering. It is recommended to perform these checks periodically, especially after long trips or extended periods of non-use.
Inspection and Maintenance
Regularly inspect and maintain your Rizoma products. If any product shows signs of leakage, bending, deformation, cracking, chipping, or wear, have it inspected by an authorized Rizoma dealer before riding again. Do not attempt to repair or modify theproducts; always replace with original Rizoma components.
Compatibility
Rizoma products may not be compatible with all motorcycles or previously installed aftermarket equipment. Contact your authorized Rizoma dealer for guidance on compatibility and installation.
FAQ
- Q: What precautions should I take when installing the brake/clutch reservoir?
- A : Always clean the cap before removing it and never leave the cap off longer than necessary to add fluid. Contaminated fluid can lead to malfunctions that may cause accidents or injuries. Improper installation could also result in brake/clutch malfunction. It is crucial to bleed the braking/clutch system after installing a new reservoir and before riding the motorcycle. Additionally, handle hydraulic oils with care as they are corrosive to the skin, eyes, mucous membranes, and varnishes.
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
Attention : This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand, and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike. Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety, Rizoma suggests to always contacting your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Mounting kit for the original fluid reservoir
- Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
WARNING: TO CLEAN YOUR FLUID TANK DON’T USE LIQUID OR SPRAY ENGINE CLEANER, DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR FLUID TANK, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
Never allow any contaminants (moisture, dust, etc.) to enter into the brake/clutch reservoir. Always clean cap before removing it. Never leave cap off for longer than necessary to add fluid to reservoir. Contaminated fluid could cause brake/clutch malfunction, resulting in an accident, personal injury or death. Improper installation of the brake/clutch reservoir could cause brake/clutch malfunction, resulting in an accident, personal injury or death. Bleed braking/clutch system after the new reservoir is installed and before you ride the motorcycle. The hydraulic oils are corrosive for the skin, the eyes, the mucous and the varnishes
INSTALL ORIGINAL FLUID TANK
Warning: take care not to damage or crush the hose during assembly. Check that the brake system is working properly before driving.
MOUNTING SOLUTION
RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled riding conditions.
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full-finger gloves, boots, and body armor.
Warnings
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Legal notes
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.