JOVIAL JOVGF26 3-Wheel Golf Push Cart User Guide

Table of Contents

JOVIAL-JOVGF26-3-Wheel-Golf-Push-Cart-product

The product is a cart designed for lifting and transporting heavy objects.
It comes with various parts including handles, tubes, scorecard, slide lock, upper bracket, joint, weight stabilize rods, leg frames, rear wheel set, leg bracket, wheel lock mechanisms, anti-splay wire, mainly frame, lower bracket, and front wheel set.
The cart can be folded for easy storage and transportation.
There are multiple adjustable positions for the handle height.
The front wheel adjustment mechanism allows for correcting veering issues.
The product is manufactured by Pyle USA.

Assembly Steps

Lift the handle to the level position.
Move the slide lock downwards and press the button on the wheel holder to insert the front wheel into the frame. Rotate the button to tighten it.
Assemble the rear wheel by rotating the button and snap it into place.

Folding Steps

To unfold the cart completely, follow the assembly steps in reverse order.
To fold the cart, rotate the button on the handle to release the front wheel. Move the slide lock towards the top to release the folded position. Press the handle downwards to fold it.

Assembly Details

Adjust the handle height by selecting one of the three adjustable positions using the slide hole.
The upper bracket is suitable for both stand and normal bags.
To stop the rear wheel, push on the brake pedal. Pull it off to release.

WARNING

For your own safety, please read and understand these warnings and keep this user guide for future reference.
Always make sure the cart is fully extended and locked before use. Always make sure the cart is folded and locked properly before lifting or transporting.
Do not run while using this product.
Do not use accessories other than those designed for use with your cart.
Keep all packing materials away from children and recycle where possible or where required by law.

WARNING

Keep hands and fingers away from moving or sliding parts!
Always keep control of the Golf Push Cart – Do not let it run down hills without full control.

JOVIAL-JOVGF26-3-Wheel-Golf-Push-Cart-fig-1

Lift the handle to level position as Fig. 1
Move the slide lock downside and lock to upper bracket as Fig. 2
Press the button on the wheel holder to assemble the rear wheel as Fig.3.
Snap front wheel insert mainly frame and then rotating the button tighten it as Fig.4.
Completely unfolding and assembly as Fig. 5.

FOLDING STEPS

JOVIAL-JOVGF26-3-Wheel-Golf-Push-Cart-fig-5

ASSEMBLY DETAILS

JOVIAL-JOVGF26-3-Wheel-Golf-Push-Cart-fig-6

Through adjusting the slide hole to adjust the handle height as Fig.9. and have 3 adjustable position as Fig.10. And for the upper bracket, it suits for the stand and normal bag as Fig.9.
Push on the brake pedal to stop the rear wheel and pull off to release as Fig.11.

FRONT WHEEL ADJUSTMENT MECHANISM

JOVIAL-JOVGF26-3-Wheel-Golf-Push-Cart-fig-7

If during use, you find the cart veers to the right or left, please see the instructions below to correct this problem. (Fig.1)
If the cart veers to the left, face the front wheel of the cart and use the Allen wrench provided to screw the right bolt counterclockwise or the left bolt clockwise until the front wheel is centered between the front fork. (Fig.2)
If the cart veers to the right, face the front wheel of the cart and use the Allen wrench provided to screw the left bolt counterclockwise or the right bolt clockwise until the front wheel is centered between the front fork. (Fig.3)