Aisee Technology V3TSM20MA 10.4 Touch Screen Multimedia Station Instruction Manual

Aisee Technology V3TSM20MA 10.4 Touch
Screen Multimedia Station
Instruction Manual

Safety Precautions

Thank you for purchasing this product.
Please read through these operating instructions so you will know how to operate your model properly. After you’ve finished reading the instructions, keep this manual in a safe place for future reference.
Only connect the unit to a 12-volt power supply with negative grounding.

Never install this unit where the operation & condition for safe driving is impaired.

Never use the video display function in the front when driving to prevent the violation of laws & regulations and also to reduce the risk of traffic accidents except for using a rearview video camera.

Never expose this unit, amplifier, and speakers to moisture or water to prevent electric sparks or fire.

Please don’t change the fuse on the power cord without professional guidance, using an improper fuse may cause damage to this unit or even cause a fire.

Please contact your nearest dealer if one of the following symptoms is experienced:
(a). Water or other objects enters the unit.
(b). There is smoke.
(c). Peculiar smell.
To ensure safe driving, please adjust the volume to a safe and comfortable level in case of emergency situations.

1. Never disassemble or adjust the unit without any professional guidance.
   For details, please consult any professional car shop/dealer for inquiry.

2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration of the monitor.

3. If any abnormal behavior of the unit is found, please refer to the troubleshooting guide of this manual. If no relevant information is found, please press [ RST ] with a ball-point pen or similar tool to resume factory default.

4. If you have parked the car in hot or cold weather for a long time, please wait until the temperature in the car becomes normal before operating the unit.

5. Do not impact the LCD monitor which could cause damage.

6. To prevent damage to the screen, avoid touching it with sharp objects.

7. To provide a clear demonstration and an alternative for easy understanding to the operation of this unit, graphic illustrations are used.
   However, some illustrations are different from the actual images displayed on the screen.

8. Operate the unit correctly according to this manual to prevent unnecessary problems. The guarantee won’t be valid if the problem is caused by an inappropriate operation.

Cautions:

1. Please don’t forget to install CAN agreement box in the package. For specific details, please refer to the installation guide.
2. Recommended USB format FAT32 for update purpose.

Basic Operations

Status bar

1. [ ]: Tap to show the main menu

2. [ ]: Tap to reveal the multitasking screen.
   Swipe up or down to see more.

3. To switch to another app, tap it.
   To close an app, drag the app left or right from the multitasking display.

4. [ ]: Return to the previous screen Press the center of the bar and swipe down to show the shortcut menu.

Playing Source Selection
The playing sources are displayed on the upper side of the screen.

Tap to enter the selected app, and swipe left/right to see other screens.

Equalizer

1. Touch the [ EQ ] icon in the source menu and the Sound setup interface will display on the screen.
2. Hold the highlight spot and drag left/right to adjust the Treble/Midrange/Bass.
   

Volume distribution (fader/balance)
You can adjust the volume distribution in the vehicle for all sources.

1. Press the [ Balance ] button. The menu for fader and balance is displayed.
   

2. Adjust fader and balance with [ ] / [ ] or [ ] / [ ] .

Radio Mode

Radio Display

1. Tune backward
Autotune backward. (long press)| 6. Enter the Preset Station list
---|---
2. Store current station to favorite list| 7. Search stations automatically
3. Current frequency| 8. Band switch
4. Preset radio station list| 9. Goto station by inputting frequency
5. Tune forward
Autotune forward. (long press)| 10. Receive local/distant stations

Select One Radio Band
Touch the [ ] The icon on the user interface to select one radio band among FM, AM.
Tune Auto Tuning
Hold [ ] / [ ] icon on the user interface more than 1 second to seek a higher / lower station.
To stop searching, repeat the operation above or press other buttons having radio functions.

Note:
When a station is received, searching stops, and the station is played.

Manual Tuning
Method 1:
During manual tuning, the frequency will be changed in steps. Touch the [ ] / [ ] icon on the user interface to tune in a higher / lower station.

Method 2:

1. Touch the numeric keypad icon [ ].
   The numeric keyboard is displayed, touch number to the input frequency.
   

2. Touch [ ] to delete the input number step by step.

3. Touch [ OK ] to enter.

Preset Station
Up to 30 FM and 20 AM stations can be stored in the preset station list.

Search stations automatically
Touch [ ] to search stations and store the strongest stations in the current band automatically.

Store a station manually

1. Tune to a station.
2. Hold the preset station icon on the center of the screen.

Recall a preset station

1. Select a band.
2. Touch a preset station on the screen.

Favorite station
Up to 30 FM and 20 AM stations can be stored in the favorite station list.
Store a favorite station

1. Tune to a station.
2. Touch [ ] to store the current station.

Recall a favorite station

1. Select a band.
2. Touch [ ] to show favorite stations.
3. Select the corresponding station.
   

Playback Mode

Connect a USB Device
Insert a USB device into the USB slot.
When connecting a USB device, the unit will read the files automatically.
Remove a USB Device

1. Select another source on the main menu.
2. Remove the USB device.

Music Playback
Select [ ](USB Music) on the screen, the unit will play back all the music on the mobile storage.

9. List window
Drag up/down to scroll.
Touch an item to select.| 12. Show favorite list
10. List the files by song name Touch a song to start playing.

Play/Pause
When playing, press the [ ] button to pause, and the sound will be mute. Press [ ] button to play.

Previous/Next Track
Press the [ ] or [ ] button to go to the previous or next track.

Search for a Folder
When playback, touch the [ ] icon to show the folder/file list.

Playlists
Add a song to your favorite playlist

1. Press a song and select [ ].
2. Add it to a favorite playlist.

Delete a song from your favorite playlist
Press [ ] on the favorite playlist, then remove it from the playlist.

Video Playback
Select on the screen, the unit will playback all the video files on the storage.
During playback, touch the screen to show control buttons.

|
---|---
1. Show list menu| 5. Sequential/Shuffle play
---|---
2. Previous movie| 6. Return to the playback menu
3. Play/Pause| 7. List window
Drag up/down to scroll.
Touch an item to select.
4. Next movie

Gallery Operations

1. Select on the screen.

2. Select one gallery to show the picture list.
   

3. Touch to view it.
   Drag left/right to scroll.

Bluetooth Mode

The Bluetooth allows you to utilize your car’s built-in audio system for hands-free wireless mobile phone or music communication. Some Bluetooth mobile phones have audio features, and some portable audio players support Bluetooth features. This system can play audio data stored in a Bluetooth audio device. The car stereo with Bluetooth will be able to retrieve phonebook contacts, received calls, dialed calls, missed calls, incoming calls, outgoing calls, and listen to music.

Notes:

• This system will not operate or may operate improperly with some Bluetooth audio players.
• The unit cannot guarantee the compatibility of all mobile phones together with the unit.
• Audio playback will be set to the same volume level asset during a telephone call.
  This can cause problems if an extreme volume level is set during the telephone call.

Touch [Phone] on the source menu to enter Bluetooth Phone mode.

1. Turn on the Bluetooth function of your mobile phone.
2. Search for new Bluetooth devices on your phone. Select the Device name from the pairing list on the mobile phone, and enter a password. (Default  password: 0000) Or touch [ ] button on the screen to search mobile Bluetooth devices.

If there are devices connected before, touch the chain icon under the phone name to establish a connection.
Touch the dustbin icon under the phone name to delete the Bluetooth® device from the list.
After connecting successfully, the unit show following menu.

Making a Call
Dial Number

1. Input numbers by digit keys on the screen.
   Touch [ ] to clear the digits.

2. Touch [ ] button to dial out.

3. Touch [ ] button to terminate the call.
   

Answering a call
You can answer an incoming call by pressing the [ ] button.
Touch [ ] button to reject an incoming call.

Call from Phonebook

1. Touch [ ] button to show your phone book.
2. Touch a number to dial out.
   

Call History
Access Call History by touching the [ ] button.  Audio playback via Bluetooth streaming
If an audio streaming device is connected with the car sound system via Bluetooth®, you can playback the music via the car sound system and control the playback.
Touch the [ ] button to play music on your mobile phone.

[ ] Previous track
[ ] Play/Pause
[ ] Next track

Adjust Bluetooth Settings

1. In the Bluetooth menu, touch [ ].
   The options menu is displayed.

2. Touch on the selected option to change the setting.
   • [ Auto Connect]: To turn on or off the “Auto connect” function.
   • [ Auto Answer]: To turn on or off the “Auto answer” function.
   • [PIN code]: To set the paring code.
   • [ Phone Book Sync]: To synchronize phone book. It may take several minutes to load on the initial setup.

Apple CarPlay

Available on select cars, CarPlay is a smarter, safer way to use your iPhone in the car. CarPlay takes the things you want to do with your iPhone while driving and puts them right on your car’s built-in display. You can get directions, make calls, send and receive messages, and listen to audiobooks and music,  all in a way that allows you to stay focused on the road.

How to enter CarPlay mode

1. Connect your iPhone to the CarPlay connector of the unit via the Apple Digital Cable. The unit will enter CarPlay mode automatically.
   

2. To exit CarPlay mode, select another mode on the upper side of the screen. If you want to return to CarPlay mode, touch [ CarPlay ] on the menu.

How to use CarPlay
CarPlay features and Siri voice control is specially designed for driving scenarios. It also works with your car’s controls. And the apps you want to use in the car have been reimagined, so you can use them while your eyes and hands stay where they belong.

Touch
you can use the touch screen of the unit to control CarPlay.

AVM

Around View Monitor
If you have installed 4 vehicle-mounted cameras, select [AVM] in the source menu, the system will create a virtual 360° view of what surrounds the vehicle.

Touch [F], [D], [L,], [R] to switch to corresponding area.

Rear View Monitor
If the car is only equipped rearview camera, the system will display the view behind the car during reversing.

Note: The function is only an assistant system.
There may be some deviation. Please operate according to the actual situation.

Settings

Basic settings
In the settings menu, you can adjust the basic settings for the different functions of the device to your requirements.
In the main menu, press the [] button.
The settings menu is displayed, and the General submenu is activated.

General settings
The following setting is possible:
Radio region – Select the reception region for the radio reception.
Blackout – Set the blackout time.
Temperature Unit – Set the temperature unit.
Mileage Unit – Set the Mileage Unit.
Ambient Lighting – Select the color of ambient lighting. (if the car is supported)
Beep – Switch confirmation beep on/off.
Driving Video – If the function is activated, Driving will be disturbed with the video on, and increase the risk of traffic accidents.
Camera Delay – Turn on/off the delayed display of the AVM system.

Volumes settings
Adjust the volume level of each mode.

Device settings
Brightness – Swipe left/right to adjust the brightness of the screen. Tap [OK] to confirm. Day/Night – Select a backlight mode from the list.
Storage – Show the storage information.
Door KeyPad Code – Set the Door Keypad Code.

System settings
Language – Select on-screen display language.
Time – Set date, time, and time format.
Factory data reset – Load the factory settings.
All data erase – Erase all data from your vehicular platform’s internal storage.
Software version – Show software version information.

Other Modes

Listen to Other Devices
You can connect an external audio/video device to the unit.

1. Connect the external device with the supplied AV cable.
2. Touch the upper left corner to display the main menu.
3. Touch [ Aux in ] to access an external device.

Reset
When the unit hangs up, you can reset it.
Press [ RST ] with a ball-point pen or similar tool.
Note:
When the unit has been reset, all the settings will return to default settings.

Replace a Fuse
If there is no power, the fuse may be damaged and need to be replaced.

1. Take out the unit from the dashboard.
2. Check all electrical connections.
3. Buy a fuse that matches the amperage of the damaged fuse.
4. Replace the fuse while the unit’s power is disconnected.

Specifications

General
Reference Supply Voltage ………………………………………………………… 12V(DC)
Operating Voltage Range ……………………………………………………..9 – 16V(DC)
Max Operating Current …………………………………………………………………….15A
Maximum Output Power …………………………………………………………… 4 X 20W
Grounding System ………………………………………….. Car Battery Negative Pole
Dimensions(WXHXD) ……………………………………………………. 25038097 mm
Weight(main unit) …………………………………………………………………………. 2.4kg
FM
Signal Noise Ratio …………………………………………………………………….. ≥50dB
Residual Noise Sensitivity (S/N=30dB) ………………………………………..≤9dBμV
Frequency Response (±3dB) …………………………………………….20Hz~12.5KHz
Station Seeking Level ………………………………………………………….. 20~28dBμV
Distortion ………………………………………………………………………………….. ≤2.0%
Stereo Separation (1KHz) …………………………………………………………… ≥25dB
Antenna Impedance …………………………………………………………………………75Ω
AM
Residual Noise Sensitivity (S/N=20dB) ………………………………………≤30dBμV
Selectivity (±9KHz) …………………………………………………………………….. ≥50dB
LCD
Screen size …………………………………………………………………… 12.1 inchs (4:3)
Display resolution …………………………………………………………..1024 X 768 dots
Brightness ……………………………………………………………………………… 280cd/m2
AUX IN
Distortion ………………………………………………………………………………….. ≤0.5%
Frequency Response (±3dB) ……………………………………………….20Hz~20KHz
Audio Input Level ………………………………………………………………………0.5Vrms
Audio
Audio Output Impedance ………………………………………………………………..100Ω
Audio Output Level …………………………………………………………….. 2Vrms(Max)
Video
Normal Video Input Level (CVBS) ………………………………………………1.0±0.2V
Video-Input Impedance …………………………………………………………………….75Ω
Environment
Operating Temperature ……………………………………………………..-30°C ~ +70°C
Storing Temperature …………………………………………………………-40°C ~ +85°C
Operating Humidity …………………………………………………………… 30%~85%RH
Storing Humidity ……………………………………………………………….. 30%~95%RH

Notice:
When the unit is operated to extremes, such as with maximum power output for a long time, or the temperature is over 70°C, it will enter heat protection mode, the volume will be reduced automatically. This is normal.

FCC Statement

1. This device complies with Part 15 of the FCC Rules.
   Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>