VIDEX VL-BNL02-24065B, VL-BNL02-50125B LED Linear Trunk Lamp User Manual

User Manual

VL-BNL02-24065B, VL-BNL02-50125B LED Linear Trunk Lamp

TECHNICAL PARAMETERS

LED LINKABLE LINEAR LIGHT
TECHNICAL PARAMETERS

1. Rated input voltage (V) and frequency (Hz):

2. Rated on-mode power (Pon);

3. Rated light output:
   31. Rated useful luminous flux (Ouse);
   3.2. Energy efficiency class according to European Commission Regulation 2019/2020;
   3.3. Energy efficiency class according to the technical regulations of Ukraine;
   INTERPRETATION OF ICONS

4. Correlated color temperature.

5. The product is not compatible with light dimmers:

6. . Color rendering index:

7. Beam angle (1;

8. Nominal lifetime L70850;

9. Class of protection against dust and moisture. Protection against solid foreign objects larger than 12 mm provided;

10. On/off cycles:

11. The light does not have a noticeable flicker;

12. Time to reach 100% of light flux;

13. No mercury contains

14. Minimum distance from the illuminated object;

15. The product can be installed and used in/on normally flammable surfaces;

16. Protection against electric shock class I. A product in which the means of protection against electric shock in addition to the main insulation, is an additional protective circuit connected to the grounding of the power supply network;

17. For indoor use only;

18. Caution, risk of electric shock;

19. Product compliable with standards of ecodesign and energy labeling according to Commission Regulation (EU) 2019/2020:

20. Replacement of the built-in light source can be performed by an authorized person of the manufacturer;

21. Replacement of the control gear can be performed by an authorized person of the manufacturer;

22. A damaged light diffuser must be replaced;

23. The product complies with the technical regulations of Ukraine;

24. The product meets the requirements of EU directives:

ENVIRONMENTAL PROTECTION

25. Pursuant to the provisions of the WEEE Act it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user wishing to get rid of electronic and electrical equipment. is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.

– Overall dimensions (mm), product weight (g/4), rated current (mA), operating temperatures range (°C), production date and batch number are indicated on individual packaging;
– Light power curve type: D (cosine).
– Product materials: Aluminum, polycarbonate;
– The shelf life before the start of use is unlimited;

PRODUCTS PURPOSE AND APPLICATION

The product is intended for consumer and commercial lighting.

CONTENTS OF THE KIT (Fig. 1)

• Lamp (Fig. 1.1);
• Surface mounting kit (Fig.1.2)
• Power connector (Fig.1.3);
• Dummy connector (Fig.1.4);
• U-Shaped bracket (Fig.1.5);
• L-Shaped bracket (Fig.1.6);
• User’s manual (Fig.1.7);
• Individual packaging (Fig.1.8).

MOUNTING AND CONNECTION INSTRUCTIONS

It is mandatory to disconnect power supply before installation. Please read the instruction before installation. Installation must be performed by a specialist with appropriate qualifications. The product is intended for installation on the ceiling. Installation methods:
Surface (included) (Fig. A);
Suspension (optional) (Fig.B). Please purchase an appropriate kit
Recessed (optional) (Fig.C). Please purchase an appropriate kit.
Please install and connect according to the diagram below. The connection must be made using a proprietary power plug (not included, please contact the manufacturer).
Connection methods:
Single light connection, using power plug (not included) (Fig. 2)
Directly connection of multiple lights in one group using stock power connectors (Fig. 3).
Note. Each group maximum total load 1000W. Each group require only one power plug.
ATTENTION! When connecting several lamps in a closed group, it is necessary to use one dummy connector to prevent the wiring from shorting (fig.4).
The power plug has a grounding wire. Failure to connect the grounding wire may result in possible electric shock. Before the first use, it is necessary to check the correctness of the mechanical fastening and connection. The product can only be used in a network that meets the energy requirements and quality standards stipulated by law.

FUNCTIONAL CHARACTERISTICS

This orsiduct can only be used ndoor. The product has no protection against moisture.

MAINTENANCE AND SAFETY INSTRUCTIONS

Any maintenance works should be carried out with the electricity turned off, and the product should cool down. Do not cover the lamp with heat-insulating materials. ensure free access of air. Clean only with soft and dry cloths. Do not use chemical detergents. The product may only be supplied with rated voltage or voltage within the given range. It is forbidden to use the product with a damaged light diffuser, damaged wiring or connection points. WARNING! Do not exceed the maximum load 1000W. Do not look directly at the LED beam. Do not attempt to disassemble the product, as this may impair performance and void the warranty. The product cannot be used in adverse conditions, e.g. dust, water, moisture, vibration, explosive atmosphere, fumes or chemical fumes, etc. The LED light source inside is non-replaceable. If the light source is broken, please contact manufacturer. Used or damaged product should be disposed of in accordance with applicable regulations.
Failure to follow these instructions may result into e.g. fire, bums, electrical shock, physical injury and other material and non-material damage. The producer shall not be responsible for any damage resulting from the failure to follow above instructions.

STORAGE AND TRANSPORTATION

Before delivery to the direct point of sale, the product must be stored in the manufacturer’s packaging at a temperature from -20°C to +40°C, in a dry room and without exposure to direct sunlight.Transportation can be carried out by land, sea, air transport in the manufacturers transport packaging.

WARRANTY

The warranty period for the product is indicated on the individual packaging and begins from the date of sale. During the warranty period, a faulty product can be exchanged or returned with prove of purchase and all components and accessories preserved. The following does not apply with the scope of limited warranty:
– Misuse the product and cause the products components damage;
– Unauthorized disassemble or the presence of deep mechanical damage to the product
– Damage due to force majeure.
The manufacturer reserves the right to make changes to these user manual or technical changes to the product without prior notice.

WARRANTY CARD

INDEX ……………………………………..
Item………………………………………….
Date and place of sale ……………………..
Date of exchange………………………………
Sellers stamp and signature ………………..

www.videx.ua
Importer: Allegro Opt Sp. z 0.0.1
Handlowa 23, 05-120 Legionowo, Poland.
Made in P.R.C.
www.videx.com.pl
Allegro-opt PE, 106-G
Heroiv Mariupolia street, Kropyvnytskyi, 25004, Ukraine.

Documents / Resources

| VIDEX VL-BNL02-24065B, VL-BNL02-50125B LED Linear Trunk Lamp [pdf] User Manual
VL-BNL02-24065B, VL-BNL02-24065B VL-BNL02-50125B LED Linear Trunk Lamp, VL- BNL02-24065B LED Linear Trunk Lamp, VL-BNL02-50125B LED Linear Trunk Lamp, LED Linear Trunk Lamp, Lamp, Trunk Lamp, LED Trunk Lamp, Linear Trunk Lamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>