ZENGGE ZJMHFA BT Mesh Floodlight User Manual
- June 5, 2024
- ZENGGE
Table of Contents
ZENGGE ZJMHFA BT Mesh Floodlight
Product Parameters
- Product Name : 24W Smart LED Floodlight
- Connection Methods : BT Mesh
- APP Name : Hao Deng
- Suitable Phone OS : Android 4.4/IOS9.0
- Channels : 5
- Wattage: 24W
- Light Luminous Flux : 2000LM
- Color Temperature : 2700K-6500K
- Working Temperature : -20 TO +45 ‘c
- Holder : 3-PIN Line
- Control Distance : Visible distance: 30M
- Voltage: 100-240VAC,50/60HZ
- Waterproof : IP66
- Average Life (hrs) : 20000H
- Certification : FCC/CE/ROHS
- Product Dimension : L:186mm W:155mm H:40mm
- Box Dimension : L:218mm W:191mm H:57mm
- N/W: 6959
- G/W : 7659
About wiring
For your
safety, please install under professional guidance. Please make sure the power
is off before wiring.
IP Grade
IP66 
If you don’t know the protection level, please refer to the chart, the third (IPXX) for dust level, the fourth (IPXX) for waterproof level. Do not soak the lamps with Insufficient protection under water for a long time!
Placement and installation method
Instructions before installation:
- First, arrange all kinds of parts for supporting lamps.
- Checking the input voltage, power and other parameters of lamp carefully before installation.
- Please make sure the power is off before installation.
- Make sure that the core of the external power line does not leak out when wring .
Control Type
Method 1: Local control (Bluetooth)
Quantity: 64 devices can be accommodated In a single location without regional
limitation, and diversified devices can be managed at the same time. Grouping:
a single device can be assigned into 8 groups and a single location can create
32,767 groups.
Function: Each device has the function of sending/forwarding signals to each
other.
Schematic diagram of control system : 
Method 2: Remote control (WIFI), need to buy “smart bridge”
Control: when there is a smart bridge, it can be controlled by Bluetooth or
through the network.
Quantity: the single location can accommodate 64 devices without regional
limitation, and diversified devices can be managed at the same time. Grouping:
a single device can be assigned into 8 groups and a single location can create
32,767 groups.
Schematic diagram of control system :
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.