VIDEX VL-DL3S-244B LED Surface Mount Light

May 15, 2024
VIDEX

VIDEX VL-DL3S-244B LED Surface Mount Light

VIDEX VL-DL3S-244B LED Surface Mount Light

TECHNICAL PARAMETERS

  1. Rated input voltage (V) and frequency (Hz);
    Technical Parameters

  2. Rated on-mode power [W):
    Technical Parameters

  3. Rated total power of the luminaire (W);

  4. Rated on-mode power of the contained LED light source [Pon);

  5. Rated light output:
    Technical Parameters

  6. Rated luminous flux of the light;

  7. Rated useful luminous ftux of the contained LED light source [¢use);

  8. Energy efficiency class of the contained LED light source, according to European Commission Regulation 2019/2020;

  9. Energy efficiency class of the light. according to the technical regulations of Ukraine;
    INTERPRETATION OF THE ICONS

  10. Correlated color temperature (K).

  11. The product is not compatible with light dimmers;

  12. Color rendering index;

  13. Light beam angle(‘):

  14. Nominal lifetime L,OB50 [hours);

  15. Class of protection against dust and moisture. Protection against solid foreign objects larger than 12 mm provided:

  16. On/off cycles;

  17. The light does not have a noticeable flicker;

  18. Time to acquire 100% light ftux [sec.):

  19. No mercury contains;

  20. Minimum distance from the illuminated object;

  21. The product can be installed and used in/on normally  tamable surfaces;

  22. Class of protection against electric shock II – protection against electric shock is provided not only by basic insulation, but also by double or reinforced insulation;

  23. A damaged light diffuser must be replaced;
    Technical Parameters

  24. For indoor use only;

  25. Replacement of the built-in light source can be performed by an authorized person of the manufacturer;
    Technical Parameters

  26. Replacement of the control gear can be performed by an authorized person of the manufacturer;
    Technical Parameters

  27. The product complies with the technical regulations of Ukraine;

  28. The product meets the requirements of EU directives;

ENVIRONMENTAL PROTECTION

  1. Pursuant to the provisions of the WEEE Act. it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.
  • Overall dimensions (mm), product weight (g/kg), rated current [mA), operating temperatures range (‘C), production date and batch number are indicated on individual packaging;
  • Light power curve type: D (cosine).
  • Product materials: polypropylene, polystyrene, polycarbonate;
  • The shelf life before the start of use is unlimited;

PRODUCT’S PURPOSE AND APPLICATION

The product is intended for general lighting of premises.

CONTENTS OF THE KIT

  • Lamp;
  • Mounting base;
  • A set of fastening elements:
  • Terminal block;
  • User manual;
  • Individual packaging.

MOUNTING AND CONNECTION INSTRUCTIONS

Before installation, it is necessary to read the instructions. Installation must be performed by a specialist with appropriate qualifications. Installation can be performed only when the power supply is turned off. The product must be installed on fiat surfaces, primarily on ceiling. Please install and connect according to the diagram below. The connection must be made using the terminal block included in the kit. Before the first use, it is necessary to check the correctness of the mechanical fastening and connection. The product can only be used in a network that meets the energy requirements and quality standards stipulated by law.

FUNCTIONAL CHARACTERISTICS

This product can only be used indoor. The product has no protection against moisture.

MAINTENANCE AND SAFETY INSTRUCTIONS

Any maintenance works should be carried out with the electricity turned off. and the product should be cooled down. Do not cover the lamp with heat- insulating materials, ensure free access of air. Clean only with soft and dry cloths. Do not use chemical detergents. The product may only be supplied with rated voltage or voltage within the given range. It is forbidden to use the product with a damaged light diffuser, damaged wiring or connection points. WARNING! Do not look directly at the LED beam. Do not attempt to disassemble the product. as this may impair performance and void the warranty. The product cannot be used in adverse conditions, e.g. dust. water, moisture, vibration, explosive atmosphere, fumes or chemical fumes, etc. The LED light source and the power supply inside the lamp cannot be replaced by user. The used product should be disposed of in accordance with current regulations. Failure to follow these instructions may result into e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. The producer shall not be responsible for any damage resulting from the failure to follow above instructions.

STORAGE AND TRANSPORTATION

Before delivery to the direct point of sale, the product must be stored in the manufacturer’s packaging at a temperature from -20’C to +40’C, in a dry room and without exposure to direct sunlight.
Transportation can be carried out by land, sea, air transport in the manufacturer’s transport packaging.

WARRANTY

The warranty period for the product is indicated on the individual packaging and begins from the date of sale. During the warranty period, a faulty product can be exchanged or returned with prove of purchase and all components and accessories preserved. The following does not apply with the scope of limited warranty:

  • Misuse the product and cause the products components damage;
  • Unauthorized disassemble or the presence of deep mechanical damage to the product;
  • Damage due to force majeure.
    The manufacturer reserves the right to make changes to this user’s manual or technical changes to the product.

Installation Instruction

Installation Instruction
Installation Instruction
Installation Instruction
Installation Instruction
Installation Instruction
Installation Instruction

Installation Instruction
Installation Instruction
Installation Instruction
Installation Instruction
Installation Instruction
Installation Instruction

Customer Support

www.videx.ua
Importer: Allegro Opt Sp. z o. o. .. Handlowa 23, 05-120 Legionowo, Poland.
Made in China/Made in China.
www.videx.com.pl
Allegro-opt PE, 106-G Heroiv Mariupolia street, Kropyvnytskyi, 25004, Ukraine.

Customer Support

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VIDEX User Manuals

Related Manuals