VIDEX VLE-F2e LED Floodlight with Motion Detector User Manual

VIDEX VLE-F2e LED Floodlight with Motion Detector

FEATURE

LED FLOODLIGHT WITH MOTION DETECTOR

1. Rated voltage, frequency.
2. Rated power.
3. Rated luminous flux.
4. 1. Nominal useful luminous flux (360°),
5. 2. Energy effñciency class.
6. Color temperature.
7. Not compatible with lighting dimmer.
8. Color Rendering Index.
9. Nominal beam angle.
10. Nominal lifetime.
11. Protection against dust and water jets provided.
12. ON/OFF cycles.
13. Protection against mechanical impacts.
14. Ultraviolet-free.
15. Mercury-free.
16. Compliance with standards of ecodesign and energy labeling in force from Sep 01, 2021
17. Working temperature
18. Product meets requirements of EU directives.
19. The minimum distance from the illunminated object.
20. Class I. A product in which protection against electric shock is provided not only by means of basic insulation but also through additional safety measures, i.e. extra protective circuit to which protective conductor of the fixed feeding installation needs to be connected.
21. Product can be installecd and operated in/on a surface made of materials which are normally flammable.
22. For outdoor use only.
23. Replace the defective lamp cover immediately. Don’t use the product if the outer bulb is cracked or broken.
24. LED ight source cannot be replaced.
25. Danger of electric shock.

ENVIRONMENTAL PROTECTION
24. Pursuant to the provisions of the WEEE Act, it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.

PRODUCT’S PURPOSE ANDAPPLICATION

This product is intended for ilumination of the public or industrial space. also of the warehouses and building structures.

INSTALLATION INSTRUCTIONS
Installation must be performed by an electrician or authorized person. Read the user’s manual prior installation. Any assembly or maintenance

activities to be done with power supply OFF. To installthe LED floodlight on the surface:

1. Drill 2 holes in the surface and fix the dowels in the holes (not included) Fig.1);
2. Connect the L N wires to the – 230V, 50/ 60Hz mains using an outdoor junction box and screw terminal (Fig.2). The ends of the wires must be insulated to the appropriate length;
3. Fix LED floodlight with screws (Fig.3);
4. Adjust the tilt angle and tighten the bolts on the bracket (Fig. 4). Before the frst use it is necessary to verify that mechanical installation and electric connection are carried out correctly.

INSTALLATION OF THE MOTION SENSOR

1. To test the motion sensor turn the detection distance control (SENS) to the maximum position (clockwise: turn the light level control (LUX) to the maximum position (clockwise; turn the delay time control (TIME) to the minimum position counterclockwise).
2. Turn on the floodlight.
3. Adjust the delay time, detection distance and light level with the controls.

FUNCTIONAL CHARACTERISTICS

• This product should be used outdoor only

MAINTENANCE& SAFETY INSTRUCTIONS

Any maintenance work must be performed when the power supply is cut OFF and the product has cooled down.

Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. LED foodlight may heat up to a high temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with the damaged electric wiring or places of connections. ATTENTION! Do not look directly at LED light beam. It’s forbidden to use the product with damaged cover. Product must not be used in unfavorable conditions, eg. vibrations, explosive air atmosphere fumes, or chemical fumes, etc. Product with non-replaceable light Source of LED type. Product cannot be fixed if the light source becomes damaged. Used or damaged product should be disposed of in accordance with applicable regulations. Failure to fllow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non- material damage. Allegro Opt Sp. z 0. 0. shall not be responsible for any damage resulting from the failure to follow these instructions. The manufacturer reserves the right to make changes in the manual.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>